Merge tag 'spi-mem-dtr' into spi-nor/next

spi: Support for DTR ops

Merge the SPIMEM DTR bits in spi-nor/next so that we can
continue the development on top of them.

Author: ambarus

drivers/spi/atmel-quadspi.c

@@ -285,6 +285,12 @@ static bool atmel_qspi_supports_op(struct spi_mem *mem,
 		op->dummy.nbytes == 0)
 		return false;
 
+	/* DTR ops not supported. */
+	if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr)
+		return false;
+	if (op->cmd.nbytes != 1)
+		return false;
+
 	return true;
 }
 

drivers/spi/spi-mem.c

@@ -156,6 +156,12 @@ bool spi_mem_default_supports_op(struct spi_mem *mem,
 				   op->data.dir == SPI_MEM_DATA_OUT))
 		return false;
 
+	if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr)
+		return false;
+
+	if (op->cmd.nbytes != 1)
+		return false;
+
 	return true;
 }
 EXPORT_SYMBOL_GPL(spi_mem_default_supports_op);
@@ -170,7 +176,7 @@ static bool spi_mem_buswidth_is_valid(u8 buswidth)
 
 static int spi_mem_check_op(const struct spi_mem_op *op)
 {
-	if (!op->cmd.buswidth)
+	if (!op->cmd.buswidth || !op->cmd.nbytes)
 		return -EINVAL;
 
 	if ((op->addr.nbytes && !op->addr.buswidth) ||
@@ -306,8 +312,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 			return ret;
 	}
 
-	tmpbufsize = sizeof(op->cmd.opcode) + op->addr.nbytes +
-		     op->dummy.nbytes;
+	tmpbufsize = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes;
 
 	/*
 	 * Allocate a buffer to transmit the CMD, ADDR cycles with kmalloc() so
@@ -322,7 +327,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 
 	tmpbuf[0] = op->cmd.opcode;
 	xfers[xferpos].tx_buf = tmpbuf;
-	xfers[xferpos].len = sizeof(op->cmd.opcode);
+	xfers[xferpos].len = op->cmd.nbytes;
 	xfers[xferpos].tx_nbits = op->cmd.buswidth;
 	spi_message_add_tail(&xfers[xferpos], &msg);
 	xferpos++;
@@ -424,8 +429,7 @@ int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
 		return ctlr->mem_ops->adjust_op_size(mem, op);
 
 	if (!ctlr->mem_ops || !ctlr->mem_ops->exec_op) {
-		len = sizeof(op->cmd.opcode) + op->addr.nbytes +
-		      op->dummy.nbytes;
+		len = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes;
 
 		if (len > spi_max_transfer_size(mem->spi))
 			return -EINVAL;

drivers/spi/spi-mtk-nor.c

@@ -195,7 +195,7 @@ static int mtk_nor_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
 		}
 	}
 
-	len = MTK_NOR_PRG_MAX_SIZE - sizeof(op->cmd.opcode) - op->addr.nbytes -
+	len = MTK_NOR_PRG_MAX_SIZE - op->cmd.nbytes - op->addr.nbytes -
 	      op->dummy.nbytes;
 	if (op->data.nbytes > len)
 		op->data.nbytes = len;
@@ -211,6 +211,12 @@ static bool mtk_nor_supports_op(struct spi_mem *mem,
 	if (op->cmd.buswidth != 1)
 		return false;
 
+	/* DTR ops not supported. */
+	if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr)
+		return false;
+	if (op->cmd.nbytes != 1)
+		return false;
+
 	if ((op->addr.nbytes == 3) || (op->addr.nbytes == 4)) {
 		if ((op->data.dir == SPI_MEM_DATA_IN) && mtk_nor_match_read(op))
 			return true;
@@ -219,7 +225,7 @@ static bool mtk_nor_supports_op(struct spi_mem *mem,
 			       (op->dummy.buswidth == 0) &&
 			       (op->data.buswidth == 1);
 	}
-	len = sizeof(op->cmd.opcode) + op->addr.nbytes + op->dummy.nbytes;
+	len = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes;
 	if ((len > MTK_NOR_PRG_MAX_SIZE) ||
 	    ((op->data.nbytes) && (len == MTK_NOR_PRG_MAX_SIZE)))
 		return false;

drivers/spi/spi-mxic.c

@@ -356,6 +356,7 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem,
 	int nio = 1, i, ret;
 	u32 ss_ctrl;
 	u8 addr[8];
+	u8 opcode = op->cmd.opcode;
 
 	ret = mxic_spi_set_freq(mxic, mem->spi->max_speed_hz);
 	if (ret)
@@ -393,7 +394,7 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem,
 	writel(readl(mxic->regs + HC_CFG) | HC_CFG_MAN_CS_ASSERT,
 	       mxic->regs + HC_CFG);
 
-	ret = mxic_spi_data_xfer(mxic, &op->cmd.opcode, NULL, 1);
+	ret = mxic_spi_data_xfer(mxic, &opcode, NULL, 1);
 	if (ret)
 		goto out;
 

drivers/spi/spi-zynq-qspi.c

@@ -527,20 +527,21 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
 	struct zynq_qspi *xqspi = spi_controller_get_devdata(mem->spi->master);
 	int err = 0, i;
 	u8 *tmpbuf;
+	u8 opcode = op->cmd.opcode;
 
 	dev_dbg(xqspi->dev, "cmd:%#x mode:%d.%d.%d.%d\n",
-		op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth,
+		opcode, op->cmd.buswidth, op->addr.buswidth,
 		op->dummy.buswidth, op->data.buswidth);
 
 	zynq_qspi_chipselect(mem->spi, true);
 	zynq_qspi_config_op(xqspi, mem->spi);
 
-	if (op->cmd.opcode) {
+	if (op->cmd.nbytes) {
 		reinit_completion(&xqspi->data_completion);
-		xqspi->txbuf = (u8 *)&op->cmd.opcode;
+		xqspi->txbuf = &opcode;
 		xqspi->rxbuf = NULL;
-		xqspi->tx_bytes = sizeof(op->cmd.opcode);
-		xqspi->rx_bytes = sizeof(op->cmd.opcode);
+		xqspi->tx_bytes = op->cmd.nbytes;
+		xqspi->rx_bytes = op->cmd.nbytes;
 		zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
 		zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
 				ZYNQ_QSPI_IXR_RXTX_MASK);

include/linux/spi/spi-mem.h

@@ -17,6 +17,7 @@
 	{							\
 		.buswidth = __buswidth,				\
 		.opcode = __opcode,				\
+		.nbytes = 1,					\
 	}
 
 #define SPI_MEM_OP_ADDR(__nbytes, __val, __buswidth)		\
@@ -69,19 +70,25 @@ enum spi_mem_data_dir {
 
 /**
  * struct spi_mem_op - describes a SPI memory operation
+ * @cmd.nbytes: number of opcode bytes (only 1 or 2 are valid). The opcode is
+ *		sent MSB-first.
  * @cmd.buswidth: number of IO lines used to transmit the command
  * @cmd.opcode: operation opcode
+ * @cmd.dtr: whether the command opcode should be sent in DTR mode or not
  * @addr.nbytes: number of address bytes to send. Can be zero if the operation
  *		 does not need to send an address
  * @addr.buswidth: number of IO lines used to transmit the address cycles
+ * @addr.dtr: whether the address should be sent in DTR mode or not
  * @addr.val: address value. This value is always sent MSB first on the bus.
  *	      Note that only @addr.nbytes are taken into account in this
  *	      address value, so users should make sure the value fits in the
  *	      assigned number of bytes.
  * @dummy.nbytes: number of dummy bytes to send after an opcode or address. Can
  *		  be zero if the operation does not require dummy bytes
  * @dummy.buswidth: number of IO lanes used to transmit the dummy bytes
+ * @dummy.dtr: whether the dummy bytes should be sent in DTR mode or not
  * @data.buswidth: number of IO lanes used to send/receive the data
+ * @data.dtr: whether the data should be sent in DTR mode or not
  * @data.dir: direction of the transfer
  * @data.nbytes: number of data bytes to send/receive. Can be zero if the
  *		 operation does not involve transferring data
@@ -90,23 +97,28 @@ enum spi_mem_data_dir {
  */
 struct spi_mem_op {
 	struct {
+		u8 nbytes;
 		u8 buswidth;
-		u8 opcode;
+		u8 dtr : 1;
+		u16 opcode;
 	} cmd;
 
 	struct {
 		u8 nbytes;
 		u8 buswidth;
+		u8 dtr : 1;
 		u64 val;
 	} addr;
 
 	struct {
 		u8 nbytes;
 		u8 buswidth;
+		u8 dtr : 1;
 	} dummy;
 
 	struct {
 		u8 buswidth;
+		u8 dtr : 1;
 		enum spi_mem_data_dir dir;
 		unsigned int nbytes;
 		union {