Software Support | Seeed Studio Wiki

[giscus[bot]]

Software Support | Seeed Studio Wiki

Getting Started with Grove Vision AI V2 and software platform

https://wiki.seeedstudio.com/grove_vision_ai_v2_software_support/

[Love4yzp]

There is an example using Arduino running on RP2040 to work with Grove Vision V2.
.ino file

Anyone wants to see the result?

[neoscell]

For demo 2, need to add AI.begin() after establishing serial:

void setup()
{
// put your setup code here, to run once:
Wire.begin();
Serial.begin(115200);
AI.begin();
while (!Serial)
delay(1000);

Serial.println("Proxy start");

}

[Gandhuttt]

anyone else having issue while invoking the grove vision when connecting it to the xiao esp32c3 board? its fine when i invoke grove vision as standalone without the xiao board in https://seeed-studio.github.io/SenseCraft-Web-Toolkit/#/setup/process or https://sensecraft.seeed.cc/ai/device/local/36, but when i invoke it while its connected to the xiao board the camera looks to be frozen, could be a firmware issue?

[ReKST-117]

Hi, I am assuming the SenseCraftAI platform only support Grove Vision AI Camera or XIAO esp32s3 Sense. I tried both of them and worked. So if you want to use XIAO+Grove Vision. You need to use Arduino IDE following the tutorial: https://wiki.seeedstudio.com/grove_vision_ai_v2_software_support/#-getting-started-with-seeed-studio-xiao-
Also, I don't think esp32c3 is compatible with the platform as when you connect the device, the device selection list explicitly stated that XIAO esp32s3; Grove Vision AI V2 and SenseCAP A1102. XIAO esp32c3 is not listed here.