Quectel L76K | Seeed Studio Wiki

[giscus[bot]]

Quectel L76K | Seeed Studio Wiki

Get Started with L76K GNSS Module for XIAO

https://wiki.seeedstudio.com/get_start_l76k_gnss/

[GustavoMurta13]

The information appears to come incomplete. The example displays the information and the location comes INVALID but the date/time comes valid and constantly updating correctly.
My setup is the same as estipulated in this tutorial with the XIAO ESP32C3.

[Love4yzp]

Hey, are u working with it? any log to share?

[agalliani]

If the pin Sleep is set to 0, the green led is switched on until the pin is set to Normal (1). Is there a way to shut it down? The provided example does not work.

[Love4yzp]

They are different LEDs.

[dpcrd]

What is the purpose of the 5V pin? According to the schematic, it's connected to nothing on the board.

[nfs0619]

Thanks for your inquiry! The 5V pin on the module corresponds to the 5V pin on the XIAO, as the module is designed to be used in conjunction with the XIAO.

[krazykonr]

Wish I had seen this earlier, worked it out the hard way with the module in hand... :P

[palmacas]

Is there any chance to get the 3D model of the module and the antenna dimensions?

[ReKST-117]

I am assuming that is not available if the file is not listed in the 'Resources' chapter under Wiki page.

[krazykonr]

As an FYI for anyone using this module not with a XIAO board - 3V3 input required.

Seems that the 5V pin is completely unused by the board.