Getting start with reComputer J30/40 | Seeed Studio Wiki

[giscus[bot]]

Getting start with reComputer J30/40 | Seeed Studio Wiki

Flash JetPack to reComputer J4012 (J401 carrier board)

https://wiki.seeedstudio.com/reComputer_J30_40_with_Jetson_getting_start/

[lucasrebra]

I bought the dev kit but I don't find if could connect to wifi. I think it doesn't have the M2 wifi module to do it

[Weavor74]

My J3011, will boot into desktop mode, only in ACPI selected in the bios Hardware description. When it does boot no keyboard or mouse is available.

[nfs0619]

Thanks for reaching out! We recommend contacting our technical support team at [email protected]. They will be able to provide you with more detailed guidance on your setup.

[ilhamrch]

Hello Nvidai Team

I have purchased Nvidia Jetson Nano Orin with J3010 series. However, when I did the settings for my needs in AI processing especially YOLO there was an problem. The problem is suddenly the Jetson Nano that I have cannot appear on the Monitor display that I connect. I have tried using DP, HDMI, and VGA. but all of that did not work. I have also checked the physical condition thoroughly and checked the HDMI Port condition also there is no problem. Do you have a solution to the problem on my Nvidia Jetson Nano Orin?

[nfs0619]

Based on what you’ve described, we suggest trying the following:

1. Try using a different monitor: Sometimes compatibility issues with specific monitors can cause the display problem. If you have access to another display, please try it out to see if the issue persists.

2. Reflash JetPack: If changing the monitor doesn’t help, we recommend reflashing your Jetson Nano Orin with the latest version of JetPack. This can sometimes resolve display-related issues caused by software or firmware inconsistencies.

If the issue still persists after trying both of these steps, please get in touch with our technical support team at [email protected] for further assistance.