Flash Jetpack | Seeed Studio Wiki #1361
giscus[bot]
bot
Replies: 24 comments 52 replies
-
|
Hi, I flashed Jetson 6.0 in Jetson Orin NX (8GB) and when i tried to upgrade i'm getting kernerl not cofigured error. Deatiled log |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for your help so far, but what about the errors we get when running [...]
Add /bin/sh
Add /lib/modules/5.15.136-tegra/kernel/drivers/usb/gadget/udc/tegra-xudc.ko
Add /lib/modules/5.15.136-tegra/kernel/drivers/usb/typec/ucsi/typec_ucsi.ko
Add /lib/modules/5.15.136-tegra/kernel/drivers/usb/typec/ucsi/ucsi_ccg.ko
Add /lib/modules/5.15.136-tegra/kernel/drivers/usb/typec/typec.ko
Cleaning up the temporary directory for updating the initrd..
Errors were encountered while processing:
nvidia-l4t-kernel
nvidia-l4t-kernel-headers
nvidia-l4t-jetson-io
nvidia-l4t-kernel-oot-modules
nvidia-l4t-display-kernel
nvidia-l4t-kernel-oot-headers
nvidia-l4t-kernel-dtbs |
Beta Was this translation helpful? Give feedback.
-
|
Can you try with Jepack 6.0 i remember seeed fixing this with the same. Also one workaround is this to ignore these packages please refer HERE |
Beta Was this translation helpful? Give feedback.
-
|
You can refer to Q8 and Q9 in our Jetson FAQ to resolve the issue you're encountering. Q8 explains why running |
Beta Was this translation helpful? Give feedback.
-
@Eldho1416, thanks helping out. Jetpack 6.0 works without any problems on my end. |
Beta Was this translation helpful? Give feedback.
-
|
Seeed-Studio/Linux_for_Tegra#41 Same issue with 6.2 |
Beta Was this translation helpful? Give feedback.
-
|
HI! |
Beta Was this translation helpful? Give feedback.
-
|
Try changing the data cable, also did you remove the jumper once the jetson went into recovery mode. |
Beta Was this translation helpful? Give feedback.
-
I can attest that. I had similar problems and changing the USB cable solved that. |
Beta Was this translation helpful? Give feedback.
-
|
I successfully made changes to the USB using sdkmanager. Thank you;) |
Beta Was this translation helpful? Give feedback.
-
|
I flashed Jetson 6.0 to an Jetson Orin Nano (8GB) and I'm trying to restore the WiFi driver, but I get always the error:
I searched on internet, but seems all right! Here my console: |
Beta Was this translation helpful? Give feedback.
-
|
Probably it is not available in Ubuntu 22.04 |
Beta Was this translation helpful? Give feedback.
-
|
https://beltrani.com/installing-the-iwlwifi-driver-on-a-jetson-nano-dev-kit/ Hope this helps. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks a lot
Inviato da Outlook per iOS<https://aka.ms/o0ukef>
…________________________________
Da: Eldho K K ***@***.***>
Inviato: Tuesday, August 20, 2024 8:30:08 PM
A: Seeed-Studio/wiki-documents ***@***.***>
Cc: Luca Nardelli ***@***.***>; Comment ***@***.***>
Oggetto: Re: [Seeed-Studio/wiki-documents] Flash Jetpack | Seeed Studio Wiki (Discussion #1361)
https://www.google.com/amp/s/beltrani.com/installing-the-iwlwifi-driver-on-a-jetson-nano-dev-kit/amp/
Hope this helps
—
Reply to this email directly, view it on GitHub<#1361 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AB6YC3V6M4JA22LNUD5EKNDZSODLBAVCNFSM6AAAAABKMQXH4SVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAMZZHEYTINA>.
You are receiving this because you commented.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
The download links for Jetpack 6.0 do not seem to be working for me. Are there alternative URL's? |
Beta Was this translation helpful? Give feedback.
-
|
same here, in the end i used VPN and it works |
Beta Was this translation helpful? Give feedback.
-
|
Hello, would I be able to flash Jetpack 6.0 using the SDK manager or can it be done only by following these steps? |
Beta Was this translation helpful? Give feedback.
-
|
If it is custom board built by seeed then you need to follow these steps. I never had a successful flash with sdk manager except for nano |
Beta Was this translation helpful? Give feedback.
-
|
Hello,
/home/varun/Downloads/jetson/mfi_recomputer-orin-j401/recomputer-orin-j401.conf: line 29: /home/varun/Downloads/jetson/mfi_recomputer-orin-j401/p3768-0000-p3767-0000-a0.conf: No such file or directory Entry added by NVIDIA initrd flash tool/home/varun/Downloads/jetson/mfi_recomputer-orin-j401/tools/kernel_flash/tmp 127.0.0.1(rw,nohide,insecure,no_subtree_check,async,no_root_squash)
Create flash environment 0
/home/varun/Downloads/jetson/mfi_recomputer-orin-j401/temp_initrdflash/bootloader0 /home/varun/Downloads/jetson/mfi_recomputer-orin-j401 Entering RCM boot [ 0.0475 ] mb1_t234_prod_aligned_sigheader.bin.encrypt filename is from --mb1_bin /home/varun/Downloads/jetson/mfi_recomputer-orin-j401
Waiting for target to boot-up... Number Start End Size File system Name Flags [ 9]: l4t_flash_from_kernel: Expanding last partition to fill the storage device Allocating group tables: done Formatting APP parition done |
Beta Was this translation helpful? Give feedback.
-
|
I had faced issue when Jetson was not in recovery mode, not sure if it had exactly the same error logs. Also what is the size of SD crad/NVMe? |
Beta Was this translation helpful? Give feedback.
-
|
Thank you for reply @Eldho1416 I am almost sure that the Jetson is is recovery mode. The nvme is of 128Gb. Do you have recommendation I can try? |
Beta Was this translation helpful? Give feedback.
-
|
Try changing the USB maybe? That is the only suggestion i can think of. |
Beta Was this translation helpful? Give feedback.
-
|
I also got the same issue. |
Beta Was this translation helpful? Give feedback.
-
|
This seems to be a superuser permissions issue with SUID of the in the |
Beta Was this translation helpful? Give feedback.
-
|
Hi i have j4012 16Gb trying to install jetpack 6, i followed the process as it is but always get error p3768-0000-p3767-0000-a0.conf file is missing. log is below? any help please sudo ./tools/kernel_flash/l4t_initrd_flash.sh --flash-only --massflash 1 --network usb3 --showlogs |
Beta Was this translation helpful? Give feedback.
-
|
New to this and I just stumbled upon this myself. Turns out that there are no spaces allowed in the path to the update package. In your case that's the 'New folder' bit, mine was 'Jetson ORIN NG'... HTH |
Beta Was this translation helpful? Give feedback.
-
|
Could you please host this file also on a US-based website? the websites in .cn are extremely slow for downloading https://szseeedstudio-my.sharepoint.cn/:u:/g/personal/youjiang_yu_szseeedstudio_partner_onmschina_cn/EbEZRxHDtgBDjBrHK_7ltfEB6JBa3VGXLx3meNc0OJUL_g?e=8MNsTg |
Beta Was this translation helpful? Give feedback.
-
|
Trying to flash Jetpack 6 to my Orin NX Seeed ReComputer J4012 kit ... over USB ... Waiting for target to boot-up... Keep getting this mount.nfs error .. what can likely be the cause of this error? Thanks |
Beta Was this translation helpful? Give feedback.
-
|
Myself and a colleauge on a seperate internet connection are both struggling to download the package for JP6.0 Orin NX 16GB. Is there an alternative download location? |
Beta Was this translation helpful? Give feedback.
-
|
I'm getting a flashing error similar to the one posted above. I have an Orin Nano 8GB developer kit with a 1 TB SSD. i'm trying to flash It will hang for about 5 minutes and then continue, ultimately failing with a flashing error. Has anyone run into this before? Am I inadvertently trying something that isn't supported? |
Beta Was this translation helpful? Give feedback.
-
|
For dev kit, please operate it in accordance with tutorial of the Nvidia sdkmanager |
Beta Was this translation helpful? Give feedback.
-
|
Hello, I just tried for nvdia jetson orin nx 8gb board but I got these What I am missing here ? |
Beta Was this translation helpful? Give feedback.
-
|
Please contact our technical support team at [email protected]. Provide them with the error details and your setup information, and they will assist you further. |
Beta Was this translation helpful? Give feedback.
-
|
FYI, make sure Host Ubuntu has IPv6 enabled, else you might see something like this in either method above: "Waiting for device to expose ssh ...sysctl: cannot stat /proc/sys/net/ipv6/conf/usb0/disable_ipv6: No such file or directory" I have re-enabled IPv6 and now have gotten past this step, and hopefully flash completes now. Update: Flash completed, all setup now. |
Beta Was this translation helpful? Give feedback.
-
|
Will there be jetpack 6.2 support for the j501 carrier board? |
Beta Was this translation helpful? Give feedback.
-
|
We are currently working on the development for this. Please stay tuned and thank you for your patience! |
Beta Was this translation helpful? Give feedback.
-
|
When will the jetpack 6.2 support for the Orin NX module be released? |
Beta Was this translation helpful? Give feedback.
-
|
Hello! We are currently working on the development, but the exact timeline has not been determined yet. Thank you for your patience! |
Beta Was this translation helpful? Give feedback.
-
|
Has anyone managed to complete the flashing process with a virtual machine or docker? |
Beta Was this translation helpful? Give feedback.
-
|
I had tried with a VM (Oracle i guess) and it used to get stuck at 99% always. |
Beta Was this translation helpful? Give feedback.
-
|
Thought so, i guess we'll keep relying on the old-ish machine in the corner of the office to flash the boards |
Beta Was this translation helpful? Give feedback.
-
|
Has anyone figured out how to encrypt the rootfs on the board with the new jetpack releases? |
Beta Was this translation helpful? Give feedback.
-
|
Hello, you can refer to this document Disk Encryption to encrypt the rootfs. |
Beta Was this translation helpful? Give feedback.
-
|
I was hoping to get a oneliner (or close to) like the one given with the mfi_recomputer-xxx archives. |
Beta Was this translation helpful? Give feedback.
-
|
Hello, I have just flashed a jetson orin nano with the jetpack 6.2 using a laptop running Ubuntu 22.04. The wifi module still did not want to work, bluetooth works nevertheless. |
Beta Was this translation helpful? Give feedback.
-
|
@jinchenglee Thanks for your feedback. May I ask if you were flashing 6.1 in a virtual machine? We recommend using a native Ubuntu environment, as virtual machines may cause USB communication issues, which can result in the process getting stuck at "Waiting for target to boot-up". Also, while flashing JP6.2 via the official SDK Manager is a workable solution, please note that this version may have some stability issues and currently does not support super mode. If you're interested in super mode, feel free to keep an eye on our upcoming products. For further questions, you're welcome to contact our technical support team at [email protected]. |
Beta Was this translation helpful? Give feedback.
-
I did use a native Ubuntu 22.04 LTS machine when trying to flashing 6.1 with SeeedStudio tarball. It waits forever on the target to reboot so I don't know why. Where is the "command" host machine sends to the target to wake it up? As the target is put into standby mode (the short of force-recovery to gnd), it must wait for sth. to start bootstrap, right?
Does this mean if I never turn-on "super mode", I should be fine with JP6.2 for Orin NX 16G on J401 board (J4012 basically)? I don't really need "super mode", which is a power monster. |
Beta Was this translation helpful? Give feedback.
-
|
Replying to @nfs0619 |
Beta Was this translation helpful? Give feedback.
-
|
@anasderkaoui Thanks for the clarification. Could you please let us know if you are using the reComputer J3011 model? Also, could you share which Wi-Fi module you are using? To help you resolve this issue more efficiently, we recommend sending these details to our technical support team at [email protected]. They will be able to assist you further. |
Beta Was this translation helpful? Give feedback.
-
|
@jinchenglee We recommend using JetPack 6.1, as JetPack 6.2 may still have stability issues. |
Beta Was this translation helpful? Give feedback.
-
|
Is there something special about how I have to flash an NVMe drive on the reComputer J401 vs the Jetson Orin NX Dev kit from NVIDIA? I have flashed NVMe on numerous setups. The official dev kit always boots NVMe without issue. The reComputer has issues detecting the NVMe drive 95% of the time. Am I doing something wrong here? |
Beta Was this translation helpful? Give feedback.
-
|
We traced this back to the low profile NVMe connector on the reComputer.. We have a heat sink that wraps around the NVMe drive and it interferes with the PCB and lifts up on the NVMe connector and broke the solder connection on a few of the edge pins. The NVIDIA dev kit has more space between the bottom of the NVMe drive and PCB so it there was no interference there. Do you happen to have the P/N of the NVMe connection so we can source a new one with a higher profile? |
Beta Was this translation helpful? Give feedback.
-
|
Thank you for the update. I would recommend reaching out to our technical support team at [email protected]. They’ll be able to provide you with more detailed information and faster assistance regarding the NVMe connector part number. |
Beta Was this translation helpful? Give feedback.
-
|
I’ve installed JetPack 6.0 on my Jetson Orin NX 16GB following the exact instructions provided here. After the installation, I encountered a permission issue when trying to open Firefox or any other browser (installed via Snap Store). The applications fail to launch because they attempt to create directories or files under the root directory It seems like there are restricted root permissions or sandboxing issues with snap packages under the current JetPack/Linux configuration. Has anyone faced this issue before or knows how to resolve it? Any suggestions such as adjusting snap confinement policies, using an alternative installation method, or correcting user permissions would be greatly appreciated. quanta@quanta-desktop:~$ firefox
2025/07/30 22:49:25.620341 cmd_run.go:1344: WARNING: cannot create user data dir
ectory: failed to verify SELinux context of /home/quanta/snap: exec: "matchpathc
on": executable file not found in $PATH
cannot set capabilities: Operation not permitted
quanta@quanta-desktop:~$ sudo firefox
2025/07/30 22:49:48.647677 cmd_run.go:1344: WARNING: cannot create user data dir
ectory: failed to verify SELinux context of /root/snap: exec: "matchpathcon": ex ecutable file not found in $PATH
touch: cannot touch '/root/snap/firefox/common/.cache/desktop-runtime-date': No such file or directory
Running Firefox as root in a regular user's session is not supported. (SXAUTHOR ITY is /run/user/1000/gdm/Xauthority which is owned by quanta.)
quanta@quanta-desktop:~$ |
Beta Was this translation helpful? Give feedback.
-
|
Hi, the issue you’re seeing can usually be resolved in one of these two ways:
You can find the detailed steps here: |
Beta Was this translation helpful? Give feedback.
-
|
Hi, I just flashed the Jetpack 6.2.1(https://seeedstudio88-my.sharepoint.com/:u:/g/personal/youjiang_yu_seeedstudio88_onmicrosoft_com/EWCZOBNb9C9AoZe-mt23jLABZk942Lf0yopVGFJFTeL5DA?e=o7epES)on an recomputer J4012 Orin NX 16GB and can’t mount ExFat drives anymore. Any hints will be appreciated. Thanks. |
Beta Was this translation helpful? Give feedback.
-
|
@coloboxp It depend on your hardware. Only recomputer Super series and Robotic series support the 6.2.1 update. |
Beta Was this translation helpful? Give feedback.
-
|
Is mine a "super" series? It's the reComputer J4012 It just arrived today, I hope this 1000€ thing is not already obsolete |
Beta Was this translation helpful? Give feedback.
-
|
I see, it is not the super, so now because of bad design, it won't get any update beyond jetpack 6.1? What are the plans to actually let it happen? Perhaps limiting the super mode....? |
Beta Was this translation helpful? Give feedback.
-
|
Hi @coloboxp , thanks for your feedback! We don’t have a guide for this case right now, but you can reach out to [email protected] — they’ll be able to give you quicker and more detailed help. |
Beta Was this translation helpful? Give feedback.
-
TBH I know that was going to be a dead end. At the end what I did is to flash Jetpack 6.2.1 on the reComputer J4012 (base) with the nVidia's SDK manager 2.3, nothing special needed, worked straightforward. |
Beta Was this translation helpful? Give feedback.
-
|
exfat doesn't work with your image/kernel. Can you please fix that according to: I am not sure how can I do that with your image. Thanks! |
Beta Was this translation helpful? Give feedback.
-
|
Thank you for your feedback! Regarding the exFAT support issue you mentioned, I recommend reaching out to our technical support team at [email protected] and providing details such as your device model, the system version you flashed, and the logs from your operation. This will help them provide you with faster and more detailed guidance. |
Beta Was this translation helpful? Give feedback.
-
|
The shasums on the wiki are wrong.. The 4G and 8G checksums are swapped. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, thanks for your update. The problem do exists and sorry for the confusion that the page brought to you. I believe this is caused by a swap of verification log on Wiki page and we would fix that as soon as possible. |
Beta Was this translation helpful? Give feedback.
and others
Uh oh!
There was an error while loading. Please reload this page.
-
Flash Jetpack | Seeed Studio Wiki
Flash JetPack to reComputer J4012 (J401 carrier board)
https://wiki.seeedstudio.com/reComputer_J4012_Flash_Jetpack/
Beta Was this translation helpful? Give feedback.
All reactions