A608 Carrier Board | Seeed Studio Wiki

[giscus[bot]]

A608 Carrier Board | Seeed Studio Wiki

This article provides a detailed guide on how to flash the JetPack operating system onto the A608 carrier board, which supports NVIDIA Jetson Orin NX/Nano modules. It covers everything from the prerequisites and entering force recovery mode, to downloading the system image and drivers, and finally flashing the operating system onto an NVMe SSD, USB flash drive, or SD card, ensuring that users can successfully complete the system installation and startup.

https://wiki.seeedstudio.com/reComputer_A608_Flash_System/

[m4zeRobot]

Hey guys,
I used the official NVIDIA SDKManager to flash my Jetson Orin NX (8GB), but now the WiFi-Drivers are missing.
Is it possible, to install the drivers provided here after the Jetson Ubuntu is already set up?

[ZhuYaoHui1998]

Do you use the official Jetson Orin NX development kit or our reComputer? Which version of Jetpack have you upgraded to using the SDK Manager? If it's not a dev Kit, please use the command line to perform flashing according to the tutorial. Do not use the SDK Manager.

[m4zeRobot]

Thanks for reaching out,
I‘m using the official Jetson Orin NX Compute Module. I installed the latest JetPack (6.1 at the time of my first install) with Ubuntu 22.04 LTS, using the SDKManager to flash it.
Is it possible to install the drivers for the A608 specific hardware like the integrated WiFi now, after installing JetPack? Or do I have to install both again simultaneously?

[ZhuYaoHui1998]

If you want to upgrade to JP6.1 and use the A608 carrier board, you cannot use SDK Manager for the upgrade. You must strictly follow our wiki tutorial for a command-line upgrade: https://wiki.seeedstudio.com/reComputer_A608_Flash_System/

[malburgj]

the bash instructions for some of the releases incorrectly state to run apply_binaries before l4t_flash_prerequisites. l4t_flash_prerequisites should be run first. e.g. if you run apply_binaries, it needs qemu and if not installed, will fail

[malburgj]

if having issues with flashing, it could be the usb port autospending during the flashing process. Watch dmesg to determine if the usb port connected to your jetson is disconnected when the flash failure occurs. If it does, the usb autosuspend feature can be disabled system wide using: echo -1 | sudo tee /sys/module/usbcore/parameters/autosuspend.

[tseanard]

When attempting to flash an Orin NX 16GB with JetPack 6.2 from a Raspberry Pi 5 (8GB, Ubuntu 25.04), I end up with an error on the last step:

Making Boot image... done.
Not signing of boot.img
Making recovery ramdisk for recovery image...
Re-generating recovery ramdisk for recovery image...
/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/ramdisk_tmp /home/ts/orin_nx_flash/Linux_for_Tegra/bootloader /home/ts/orin_nx_flash/Linux_for_Tegra
72826 blocks

gzip: /home/ts/orin_nx_flash/Linux_for_Tegra/kernel/Image: not in gzip format
_BASE_KERNEL_VERSION=5.15.148-tegra
command is failed
Error: failed to generate images
Cleaning up...

The full output of the last step is this:

ts@pi5:~/orin_nx_flash/Linux_for_Tegra$ sudo ./tools/kernel_flash/l4t_initrd_flash.sh --external-device nvme0n1p1 -c tools/kernel_flash/flash_l4t_t234_nvme.xml -p "-c bootloader/generic/cfg/flash_t234_qspi.xml" --showlogs --network usb0 jetson-orin-nano-devkit-super internal
[sudo] password for ts:
Please install the Secureboot package to use initrd flash for fused board
# Entry added by NVIDIA initrd flash tool
/home/ts/orin_nx_flash/Linux_for_Tegra/tools/kernel_flash/tmp 127.0.0.1(rw,nohide,insecure,no_subtr                                                                                                  ee_check,async,no_root_squash)
rpcbind: another rpcbind is already running. Aborting
Export list for localhost:
/home/ts/orin_nx_flash/Linux_for_Tegra/tools/kernel_flash/tmp 127.0.0.1
/home/ts/orin_nx_flash/Linux_for_Tegra/tools/kernel_flash/l4t_initrd_flash_internal.sh --no-flash -                                                                                                  -external-device nvme0n1p1 -c tools/kernel_flash/flash_l4t_t234_nvme.xml -p -c bootloader/generic/c                                                                                                  fg/flash_t234_qspi.xml --showlogs --network usb0 jetson-orin-nano-devkit-super internal
************************************
*                                  *
*  Step 1: Generate flash packages *
*                                  *
************************************
Create folder to store images to flash
Generate image for internal storage devices
Generate images to be flashed
ADDITIONAL_DTB_OVERLAY=""  /home/ts/orin_nx_flash/Linux_for_Tegra/flash.sh --no-flash --sign  -c bo                                                                                                  otloader/generic/cfg/flash_t234_qspi.xml jetson-orin-nano-devkit-super internal

###############################################################################
# L4T BSP Information:
# R36 , REVISION: 4.3
# User release: 0.0
###############################################################################
ECID is 0x80012344705DD847200000000EFE8240
copying device_config(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-bc                                                                                                  t-device-p3767-0000.dts)... done.
copying misc_config(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-bct-                                                                                                  misc-p3767-0000.dts)... done.
copying emc_fuse_dev_params(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/generic/BCT/tegra234-                                                                                                  br-bct-diag-boot.dts)... done.
copying minratchet_config(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb                                                                                                  1-bct-ratchet-p3767-0000.dts)... done.
Existing emcfuse(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/fuse_t234.xml) reused.
./tegraflash.py --chip "0x23" --applet "/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/mb1_t234_                                                                                                  prod.bin" --skipuid --cfg readinfo_t234_min_prod.xml --dev_params tegra234-br-bct-diag-boot.dts --d                                                                                                  evice_config tegra234-mb1-bct-device-p3767-0000.dts --misc_config tegra234-mb1-bct-misc-p3767-0000.                                                                                                  dts --bins "mb2_applet applet_t234.bin" --minratchet_config tegra234-mb1-bct-ratchet-p3767-0000.dts                                                                                                   --cmd "readfuses fuse_t234.bin fuse_t234.xml; dump eeprom cvm cvm.bin; dump try_custinfo custinfo_                                                                                                  out.bin; reboot recovery"
Welcome to Tegra Flash
version 1.0.0
Type ? or help for help and q or quit to exit
Use ! to execute system commands

[   0.0455 ] Reading fuses
[   0.0464 ] tegrarcm_v2 --chip 0x23 0 --ismb2applet
[   0.0472 ] File rcm_state open failed
[   0.0637 ] ERROR: failed to read rcm_state
[   0.0678 ] tegrasign_v3.py --key None --getmode mode.txt
[   0.0681 ] Assuming zero filled SBK key
[   0.0667 ] Pre-processing config: tegra234-mb1-bct-device-p3767-0000.dts
[   0.1362 ] Pre-processing config: tegra234-mb1-bct-misc-p3767-0000.dts
[   0.2885 ] Pre-processing config: tegra234-mb1-bct-ratchet-p3767-0000.dts
[   0.3515 ] Parsing partition layout
[   0.3524 ] tegraparser_v2 --pt readinfo_t234_min_prod.xml.tmp
[   0.3820 ] Kernel DTB used: None
[   0.3820 ] WARNING: dce base dtb is not provided

[   0.3820 ] Parsing partition layout
[   0.3828 ] tegraparser_v2 --pt readinfo_t234_min_prod.xml.tmp
[   0.4112 ] Creating list of images to be signed
[   0.4121 ] Generating ratchet blob
[   0.4121 ] Generating coldboot mb1-bct
[   0.4130 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_cold_boot_bct.cfg --misc tegra234-mb1-bct-misc-                                                                                                  p3767-0000_cpp.dtb --device tegra234-mb1-bct-device-p3767-0000_cpp.dtb --minratchet tegra234-mb1-bc                                                                                                  t-ratchet-p3767-0000_cpp.dtb --ratchet_blob ratchet_blob.bin
[   0.4137 ] MB1-BCT version: 0.13

[   0.4672 ] Parsing config file :tegra234-mb1-bct-device-p3767-0000_cpp.dtb
[   0.4676 ] Added Platform Config 9 data with size :- 100

[   0.4712 ] Parsing config file :tegra234-mb1-bct-ratchet-p3767-0000_cpp.dtb
[   0.4768 ] Updating mb1-bct with firmware information
[   0.4776 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_cold_boot_bct_MB1.bct --updatefwinfo readinfo_t                                                                                                  234_min_prod.xml.bin
[   0.5013 ] tegrahost_v2 --chip 0x23 0 --align mb1_cold_boot_bct_MB1_aligned.bct
[   0.5183 ] Generating SHA2 Hash for mb1bct
[   0.5436 ] Sha saved in mb1_cold_boot_bct_MB1_aligned.sha
[   0.5671 ] Sha saved in mb1_cold_boot_bct_MB1.sha
[   0.5664 ] tegrahost_v2 --chip 0x23 0 --magicid MBCT --ratchet_blob ratchet_blob.bin --appendsigh                                                                                                  eader mb1_cold_boot_bct_MB1_aligned.bct zerosbk
[   0.5672 ] adding BCH for mb1_cold_boot_bct_MB1_aligned.bct
[   0.5989 ] tegrasign_v3.py --key None --list mb1_cold_boot_bct_MB1_aligned_sigheader.bct_list.xml                                                                                                   --pubkeyhash pub_key.key --sha sha512
[   0.5991 ] Assuming zero filled SBK key
[   0.6257 ] Warning: pub_key.key is not found
[   0.6250 ] tegrahost_v2 --chip 0x23 0 --updatesigheader mb1_cold_boot_bct_MB1_aligned_sigheader.b                                                                                                  ct.encrypt mb1_cold_boot_bct_MB1_aligned_sigheader.bct.hash zerosbk
[   0.6491 ] tegrahost_v2 --chip 0x23 0 --partitionlayout readinfo_t234_min_prod.xml.bin --ratchet_                                                                                                  blob ratchet_blob.bin --list images_list.xml zerosbk
[   0.6499 ] MB1: Nvheader already present is mb1_t234_prod_aligned.bin
[   0.6780 ] Header already present for mb1_t234_prod_aligned_sigheader.bin
[   0.6840 ] MB1: Nvheader already present is mb1_t234_prod_aligned.bin
[   0.7384 ] Header already present for mb1_t234_prod_aligned_sigheader.bin
[   0.7424 ] MB1: Nvheader already present is psc_bl1_t234_prod_aligned.bin
[   0.7900 ] Header already present for psc_bl1_t234_prod_aligned_sigheader.bin
[   0.7918 ] adding BCH for mb2_t234_aligned.bin
[   0.8214 ] MB1: Nvheader already present is psc_bl1_t234_prod_aligned.bin
[   0.9524 ] Header already present for psc_bl1_t234_prod_aligned_sigheader.bin
[   0.9543 ] adding BCH for mb2_t234_aligned.bin
[   1.1139 ] Filling MB1 storage info
[   1.1139 ] Parsing dev params for multi chains
[   1.1823 ] Generating br-bct
[   1.1831 ] Updating dev and MSS params in BR BCT
[   1.1831 ] tegrabct_v2 --dev_param tegra234-br-bct-diag-boot_cpp.dtb --brbct br_bct.cfg --chip 0x                                                                                                  23 0
[   1.2159 ] Updating bl info
[   1.2168 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updateblinfo readinfo_t234_min_prod.                                                                                                  xml.bin
[   1.2174 ] WARNING: boot chain is not completed. set to 0
[   1.2498 ] Generating signatures
[   1.2515 ] tegrasign_v3.py --key None --list images_list.xml --pubkeyhash pub_key.key --sha sha51                                                                                                  2
[   1.2517 ] Assuming zero filled SBK key
[   1.4156 ] Warning: pub_key.key is not found
[   1.4144 ] Parsing dev params for multi chains
[   1.4144 ] Generating br-bct
[   1.4151 ] Updating dev and MSS params in BR BCT
[   1.4152 ] tegrabct_v2 --dev_param tegra234-br-bct-diag-boot_cpp.dtb --brbct br_bct.cfg --chip 0x                                                                                                  23 0
[   1.4479 ] Updating bl info
[   1.4488 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updateblinfo readinfo_t234_min_prod.                                                                                                  xml.bin --updatesig images_list_signed.xml
[   1.4494 ] WARNING: boot chain is not completed. set to 0
[   1.4873 ] Generating SHA2 Hash
[   1.5116 ] Sha saved in br_bct_BR.sha
[   1.5101 ] Get Signed section of bct
[   1.5109 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --listbct bct_list.xml
[   1.5350 ] Signing BCT
[   1.5368 ] tegrasign_v3.py --key None --list bct_list.xml --pubkeyhash pub_key.key --sha sha512
[   1.5370 ] Assuming zero filled SBK key
[   1.5865 ] Sha saved in br_bct_BR.sha
[   1.5870 ] Warning: pub_key.key is not found
[   1.5853 ] Updating BCT with signature
[   1.5861 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updatesig bct_list_signed.xml
[   1.5868 ] Offset :4608 Len :3584
[   1.6183 ] Generating SHA2 Hash
[   1.6200 ] tegrasign_v3.py --key None --list bct_list.xml --sha sha512
[   1.6202 ] Assuming zero filled SBK key
[   1.6202 ] Assuming zero filled SBK key
[   1.6699 ] Sha saved in br_bct_BR.sha
[   1.6687 ] Updating BCT with SHA2 Hash
[   1.6695 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updatesha bct_list_signed.xml
[   1.6703 ] Offset :4608 Len :3584
[   1.6959 ] Offset :68 Len :8124
[   1.7029 ] Generating coldboot mb1-bct
[   1.7038 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_cold_boot_bct.cfg --misc tegra234-mb1-bct-misc-                                                                                                  p3767-0000_cpp.dtb --device tegra234-mb1-bct-device-p3767-0000_cpp.dtb --minratchet tegra234-mb1-bc                                                                                                  t-ratchet-p3767-0000_cpp.dtb --ratchet_blob ratchet_blob.bin
[   1.7044 ] MB1-BCT version: 0.13

[   1.7564 ] Parsing config file :tegra234-mb1-bct-device-p3767-0000_cpp.dtb
[   1.7569 ] Added Platform Config 9 data with size :- 100

[   1.7605 ] Parsing config file :tegra234-mb1-bct-ratchet-p3767-0000_cpp.dtb
[   1.7660 ] Updating mb1-bct with firmware information
[   1.7669 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_cold_boot_bct_MB1.bct --updatefwinfo readinfo_t                                                                                                  234_min_prod.xml.bin
[   1.7907 ] tegrahost_v2 --chip 0x23 0 --align mb1_cold_boot_bct_MB1_aligned.bct
[   1.8076 ] Generating SHA2 Hash for mb1bct
[   1.8327 ] Sha saved in mb1_cold_boot_bct_MB1_aligned.sha
[   1.8563 ] Sha saved in mb1_cold_boot_bct_MB1.sha
[   1.8556 ] tegrahost_v2 --chip 0x23 0 --magicid MBCT --ratchet_blob ratchet_blob.bin --appendsigh                                                                                                  eader mb1_cold_boot_bct_MB1_aligned.bct zerosbk
[   1.8563 ] adding BCH for mb1_cold_boot_bct_MB1_aligned.bct
[   1.8880 ] tegrasign_v3.py --key None --list mb1_cold_boot_bct_MB1_aligned_sigheader.bct_list.xml                                                                                                   --pubkeyhash pub_key.key --sha sha512
[   1.8882 ] Assuming zero filled SBK key
[   1.9149 ] Warning: pub_key.key is not found
[   1.9141 ] tegrahost_v2 --chip 0x23 0 --updatesigheader mb1_cold_boot_bct_MB1_aligned_sigheader.b                                                                                                  ct.encrypt mb1_cold_boot_bct_MB1_aligned_sigheader.bct.hash zerosbk
[   1.9384 ] Generating recovery mb1-bct
[   1.9392 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_bct.cfg --misc tegra234-mb1-bct-misc-p3767-0000                                                                                                  _cpp.dtb --device tegra234-mb1-bct-device-p3767-0000_cpp.dtb --minratchet tegra234-mb1-bct-ratchet-                                                                                                  p3767-0000_cpp.dtb --ratchet_blob ratchet_blob.bin
[   1.9399 ] MB1-BCT version: 0.13

[   1.9916 ] Parsing config file :tegra234-mb1-bct-device-p3767-0000_cpp.dtb
[   1.9921 ] Added Platform Config 9 data with size :- 100

[   1.9956 ] Parsing config file :tegra234-mb1-bct-ratchet-p3767-0000_cpp.dtb
[   2.0013 ] Updating mb1-bct with firmware information
[   2.0021 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_bct_MB1.bct --recov --updatefwinfo readinfo_t23                                                                                                  4_min_prod.xml.bin
[   2.0257 ] tegrahost_v2 --chip 0x23 0 --align mb1_bct_MB1_aligned.bct
[   2.0426 ] Generating SHA2 Hash for mb1bct
[   2.0682 ] Sha saved in mb1_bct_MB1_aligned.sha
[   2.0917 ] Sha saved in mb1_bct_MB1.sha
[   2.0910 ] tegrahost_v2 --chip 0x23 0 --magicid MBCT --ratchet_blob ratchet_blob.bin --appendsigh                                                                                                  eader mb1_bct_MB1_aligned.bct zerosbk
[   2.0918 ] adding BCH for mb1_bct_MB1_aligned.bct
[   2.1232 ] tegrasign_v3.py --key None --list mb1_bct_MB1_aligned_sigheader.bct_list.xml --pubkeyh                                                                                                  ash pub_key.key --sha sha512
[   2.1234 ] Assuming zero filled SBK key
[   2.1501 ] Warning: pub_key.key is not found
[   2.1493 ] tegrahost_v2 --chip 0x23 0 --updatesigheader mb1_bct_MB1_aligned_sigheader.bct.encrypt                                                                                                   mb1_bct_MB1_aligned_sigheader.bct.hash zerosbk
[   2.1733 ] Info: Skip generating mem_bct because sdram_config is not defined
[   2.1734 ] Info: Skip generating mem_bct because sdram_config is not defined
[   2.1734 ] Copying signatures
[   2.1742 ] tegrahost_v2 --chip 0x23 0 --partitionlayout readinfo_t234_min_prod.xml.bin --updatesi                                                                                                  g images_list_signed.xml
[   2.2398 ] mb1_t234_prod_aligned_sigheader.bin.encrypt filename is from images_list
[   2.2401 ] psc_bl1_t234_prod_aligned_sigheader.bin.encrypt filename is from images_list
[   2.2401 ] Boot Rom communication
[   2.2409 ] tegrarcm_v2 --new_session --chip 0x23 0 --uid --download bct_br br_bct_BR.bct --downlo                                                                                                  ad mb1 mb1_t234_prod_aligned_sigheader.bin.encrypt --download psc_bl1 psc_bl1_t234_prod_aligned_sig                                                                                                  header.bin.encrypt --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt
[   2.2417 ] BR_CID: 0x80012344705DD847200000000EFE8240
[   2.3066 ] Sending bct_br
[   2.3502 ] Sending mb1
[   2.3534 ] Sending psc_bl1
[   2.3637 ] Sending bct_mb1
[   2.3714 ] Boot Rom communication completed
[   2.3728 ] tegrahost_v2 --chip 0x23 0 --align applet_t234_aligned.bin
[   2.3913 ] tegrahost_v2 --chip 0x23 0 --magicid MB2A --ratchet_blob ratchet_blob.bin --appendsigh                                                                                                  eader applet_t234_aligned.bin zerosbk
[   2.3922 ] adding BCH for applet_t234_aligned.bin
[   2.5103 ] tegrasign_v3.py --key None --list applet_t234_aligned_sigheader.bin_list.xml --pubkeyh                                                                                                  ash pub_key.key --sha sha512
[   2.5104 ] Assuming zero filled SBK key
[   2.5379 ] Warning: pub_key.key is not found
[   2.5372 ] tegrahost_v2 --chip 0x23 0 --updatesigheader applet_t234_aligned_sigheader.bin.encrypt                                                                                                   applet_t234_aligned_sigheader.bin.hash zerosbk
[   2.5640 ] Sending mb2_applet...

[   2.5649 ] tegrarcm_v2 --chip 0x23 0 --pollbl --download applet applet_t234_sigheader.bin.encrypt
[   2.5656 ] BL: version 1.4.0.4-t234-54845784-e89ea9bc last_boot_error: 0
[   2.6302 ] Sending applet
[   2.7291 ] completed
[   2.7299 ] tegrarcm_v2 --chip 0x23 0 --ismb2applet
[   2.7307 ] MB2 Applet version 01.00.0000
[   2.9193 ] tegrarcm_v2 --chip 0x23 0 --ismb2applet
[   2.9201 ] MB2 Applet version 01.00.0000
[   2.9898 ] Parsing fuse info as per xml file
[   2.9907 ] tegraparser_v2 --chip 0x23 0 --get_fuse_names fuse_t234.xml read_fuse_names.txt
[   2.9915 ] MagicId=0x45535546 version=0x2
[   3.0184 ] trying to read fuse with MB2 Applet
[   3.0194 ] tegraparser_v2 --chip 0x23 0 --read_fusetype PublicKeyHash read_fuse.bin
[   3.0383 ] tegrarcm_v2 --oem readfuses __fuse_read_scatter.bin read_fuse.bin
[   3.0391 ] MB2 Applet version 01.00.0000
[   3.1502 ] Saved read fuses in file __fuse_read_scatter.bin
[   3.1586 ] Fuse read successful
[   3.1622 ] tegraparser_v2 --chip 0x23 0 --read_fusetype PkcPubkeyHash1 read_fuse.bin
[   3.1813 ] tegrarcm_v2 --oem readfuses __fuse_read_scatter.bin read_fuse.bin
[   3.1822 ] MB2 Applet version 01.00.0000
[   3.2923 ] Saved read fuses in file __fuse_read_scatter.bin
[   3.3004 ] Fuse read successful
[   3.3043 ] tegraparser_v2 --chip 0x23 0 --read_fusetype PkcPubkeyHash2 read_fuse.bin
[   3.3231 ] tegrarcm_v2 --oem readfuses __fuse_read_scatter.bin read_fuse.bin
[   3.3239 ] MB2 Applet version 01.00.0000
[   3.4341 ] Saved read fuses in file __fuse_read_scatter.bin
[   3.4423 ] Fuse read successful
[   3.4460 ] tegraparser_v2 --chip 0x23 0 --read_fusetype BootSecurityInfo read_fuse.bin
[   3.4628 ] tegrarcm_v2 --oem readfuses __fuse_read_scatter.bin read_fuse.bin
[   3.4636 ] MB2 Applet version 01.00.0000
[   3.5714 ] Saved read fuses in file __fuse_read_scatter.bin
[   3.5794 ] Fuse read successful
[   3.5828 ] tegraparser_v2 --chip 0x23 0 --read_fusetype ArmJtagDisable read_fuse.bin
[   3.5997 ] tegrarcm_v2 --oem readfuses __fuse_read_scatter.bin read_fuse.bin
[   3.6005 ] MB2 Applet version 01.00.0000
[   3.7084 ] Saved read fuses in file __fuse_read_scatter.bin
[   3.7164 ] Fuse read successful
[   3.7200 ] tegraparser_v2 --chip 0x23 0 --read_fusetype SecurityMode read_fuse.bin
[   3.7370 ] tegrarcm_v2 --oem readfuses __fuse_read_scatter.bin read_fuse.bin
[   3.7377 ] MB2 Applet version 01.00.0000
[   3.8455 ] Saved read fuses in file __fuse_read_scatter.bin
[   3.8533 ] Fuse read successful
[   3.8569 ] tegraparser_v2 --chip 0x23 0 --read_fusetype SwReserved read_fuse.bin
[   3.8739 ] tegrarcm_v2 --oem readfuses __fuse_read_scatter.bin read_fuse.bin
[   3.8746 ] MB2 Applet version 01.00.0000
[   3.9827 ] Saved read fuses in file __fuse_read_scatter.bin
[   3.9903 ] Fuse read successful
[   3.9939 ] tegraparser_v2 --chip 0x23 0 --read_fusetype DebugAuthentication read_fuse.bin
[   4.0108 ] tegrarcm_v2 --oem readfuses __fuse_read_scatter.bin read_fuse.bin
[   4.0116 ] MB2 Applet version 01.00.0000
[   4.1195 ] Saved read fuses in file __fuse_read_scatter.bin
[   4.1273 ] Fuse read successful
[   4.1308 ] tegraparser_v2 --chip 0x23 0 --read_fusetype OdmInfo read_fuse.bin
[   4.1478 ] tegrarcm_v2 --oem readfuses __fuse_read_scatter.bin read_fuse.bin
[   4.1486 ] MB2 Applet version 01.00.0000
[   4.2564 ] Saved read fuses in file __fuse_read_scatter.bin
[   4.2643 ] Fuse read successful
[   4.2679 ] tegraparser_v2 --chip 0x23 0 --read_fusetype OdmId read_fuse.bin
[   4.2848 ] tegrarcm_v2 --oem readfuses __fuse_read_scatter.bin read_fuse.bin
[   4.2856 ] MB2 Applet version 01.00.0000
[   4.3936 ] Saved read fuses in file __fuse_read_scatter.bin
[   4.4014 ] Fuse read successful
[   4.4050 ] tegraparser_v2 --chip 0x23 0 --read_fusetype OdmLock read_fuse.bin
[   4.4220 ] tegrarcm_v2 --oem readfuses __fuse_read_scatter.bin read_fuse.bin
[   4.4227 ] MB2 Applet version 01.00.0000
[   4.5305 ] Saved read fuses in file __fuse_read_scatter.bin
[   4.5383 ] Fuse read successful
[   4.5419 ] tegraparser_v2 --chip 0x23 0 --read_fusetype ReservedOdm0 read_fuse.bin
[   4.5588 ] tegrarcm_v2 --oem readfuses __fuse_read_scatter.bin read_fuse.bin
[   4.5596 ] MB2 Applet version 01.00.0000
[   4.6675 ] Saved read fuses in file __fuse_read_scatter.bin
[   4.6775 ] Fuse read successful
[   4.6811 ] tegraparser_v2 --chip 0x23 0 --read_fusetype ReservedOdm1 read_fuse.bin
[   4.6981 ] tegrarcm_v2 --oem readfuses __fuse_read_scatter.bin read_fuse.bin
[   4.6990 ] MB2 Applet version 01.00.0000
[   4.8065 ] Saved read fuses in file __fuse_read_scatter.bin
[   4.8144 ] Fuse read successful
[   4.8179 ] tegraparser_v2 --chip 0x23 0 --read_fusetype ReservedOdm2 read_fuse.bin
[   4.8349 ] tegrarcm_v2 --oem readfuses __fuse_read_scatter.bin read_fuse.bin
[   4.8356 ] MB2 Applet version 01.00.0000
[   4.9435 ] Saved read fuses in file __fuse_read_scatter.bin
[   4.9513 ] Fuse read successful
[   4.9549 ] tegraparser_v2 --chip 0x23 0 --read_fusetype ReservedOdm3 read_fuse.bin
[   4.9720 ] tegrarcm_v2 --oem readfuses __fuse_read_scatter.bin read_fuse.bin
[   4.9728 ] MB2 Applet version 01.00.0000
[   5.0805 ] Saved read fuses in file __fuse_read_scatter.bin
[   5.0884 ] Fuse read successful
[   5.0919 ] tegraparser_v2 --chip 0x23 0 --read_fusetype ReservedOdm4 read_fuse.bin
[   5.1090 ] tegrarcm_v2 --oem readfuses __fuse_read_scatter.bin read_fuse.bin
[   5.1097 ] MB2 Applet version 01.00.0000
[   5.2175 ] Saved read fuses in file __fuse_read_scatter.bin
[   5.2253 ] Fuse read successful
[   5.2289 ] tegraparser_v2 --chip 0x23 0 --read_fusetype ReservedOdm5 read_fuse.bin
[   5.2459 ] tegrarcm_v2 --oem readfuses __fuse_read_scatter.bin read_fuse.bin
[   5.2467 ] MB2 Applet version 01.00.0000
[   5.3545 ] Saved read fuses in file __fuse_read_scatter.bin
[   5.3623 ] Fuse read successful
[   5.3659 ] tegraparser_v2 --chip 0x23 0 --read_fusetype ReservedOdm6 read_fuse.bin
[   5.3829 ] tegrarcm_v2 --oem readfuses __fuse_read_scatter.bin read_fuse.bin
[   5.3837 ] MB2 Applet version 01.00.0000
[   5.4915 ] Saved read fuses in file __fuse_read_scatter.bin
[   5.4993 ] Fuse read successful
[   5.5029 ] tegraparser_v2 --chip 0x23 0 --read_fusetype ReservedOdm7 read_fuse.bin
[   5.5197 ] tegrarcm_v2 --oem readfuses __fuse_read_scatter.bin read_fuse.bin
[   5.5205 ] MB2 Applet version 01.00.0000
[   5.6285 ] Saved read fuses in file __fuse_read_scatter.bin
[   5.6363 ] Fuse read successful
[   5.6400 ] tegraparser_v2 --chip 0x23 0 --read_fusetype Sku read_fuse.bin
[   5.6569 ] tegrarcm_v2 --oem readfuses __fuse_read_scatter.bin read_fuse.bin
[   5.6577 ] MB2 Applet version 01.00.0000
[   5.7655 ] Saved read fuses in file __fuse_read_scatter.bin
[   5.7735 ] Fuse read successful
[   5.7769 ] tegraparser_v2 --chip 0x23 0 --read_fusetype Uid read_fuse.bin
[   5.7938 ] tegrarcm_v2 --oem readfuses __fuse_read_scatter.bin read_fuse.bin
[   5.7946 ] MB2 Applet version 01.00.0000
[   5.9025 ] Saved read fuses in file __fuse_read_scatter.bin
[   5.9106 ] Fuse read successful
[   5.9139 ] tegraparser_v2 --chip 0x23 0 --read_fusetype OptEmcDisable read_fuse.bin
[   5.9308 ] tegrarcm_v2 --oem readfuses __fuse_read_scatter.bin read_fuse.bin
[   5.9316 ] MB2 Applet version 01.00.0000
[   6.0395 ] Saved read fuses in file __fuse_read_scatter.bin
[   6.0475 ] Fuse read successful
[   6.0511 ] tegrarcm_v2 --chip 0x23 0 --ismb2applet
[   6.0518 ] MB2 Applet version 01.00.0000
[   6.1197 ] tegrarcm_v2 --chip 0x23 0 --ismb2applet
[   6.1204 ] MB2 Applet version 01.00.0000
[   6.1878 ] Retrieving board information
[   6.1885 ] tegrarcm_v2 --chip 0x23 0 --oem platformdetails chip chip_info.bin
[   6.1893 ] MB2 Applet version 01.00.0000
[   6.2551 ] Saved platform info in chip_info.bin
[   6.2626 ] Chip minor revision: 1
[   6.2627 ] Bootrom revision: 0x7
[   6.2629 ] Ram code: 0x0
[   6.2630 ] Chip sku: 0xd3
[   6.2631 ] Chip Sample: prod
[   6.2663 ] Retrieving EEPROM data
[   6.2664 ] tegrarcm_v2 --oem platformdetails eeprom cvm /home/ts/orin_nx_flash/Linux_for_Tegra/bo                                                                                                  otloader/cvm.bin --chip 0x23 0
[   6.2671 ] MB2 Applet version 01.00.0000
[   6.3320 ] Saved platform info in /home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/cvm.bin
[   6.3693 ] tegrarcm_v2 --chip 0x23 0 --ismb2applet
[   6.3700 ] MB2 Applet version 01.00.0000
[   6.4378 ] tegrarcm_v2 --chip 0x23 0 --ismb2applet
[   6.4385 ] MB2 Applet version 01.00.0000
[   6.5060 ] Dumping customer Info
[   6.5068 ] tegrarcm_v2 --chip 0x23 0 --oem dump bct tmp.bct
[   6.5075 ] MB2 Applet version 01.00.0000
[   6.5720 ] Saved bct in tmp.bct
[   6.5966 ] tegrabct_v2 --brbct tmp.bct --chip 0x23 0 --custinfo /home/ts/orin_nx_flash/Linux_for_                                                                                                  Tegra/bootloader/custinfo_out.bin
[   6.5973 ] Customer data saved in /home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/custinfo_out.                                                                                                  bin successfully[   6.6181 ] Rebooting to recovery mode
[   6.6188 ] tegrarcm_v2 --chip 0x23 0 --ismb2
[   6.6852 ] tegrarcm_v2 --chip 0x23 0 --ismb2applet
[   6.6859 ] MB2 Applet version 01.00.0000
[   6.7530 ] Booting to recovery mode
[   6.7538 ] tegrarcm_v2 --chip 0x23 0 --reboot recovery
[   6.7545 ] MB2 Applet version 01.00.0000
Board ID(3767) version(300) sku(0000) revision(H.2)
Preset RAMCODE is 0
Chip SKU(00:00:00:D3) ramcode(0) fuselevel(fuselevel_production) board_FAB(300)
emc_opt_disable_fuse:(0)
Copy /home/ts/orin_nx_flash/Linux_for_Tegra/kernel/dtb/tegra234-p3768-0000+p3767-0000-nv-super.dtb                                                                                                   to /home/ts/orin_nx_flash/Linux_for_Tegra/kernel/dtb/tegra234-p3768-0000+p3767-0000-nv-super.dtb.re                                                                                                  c
Generated UUID 7448cfcc-ac0a-40f1-9900-cfb221572ea7 for mounting root APP partition.
copying bctfile(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/generic/BCT/tegra234-p3767-0000-s                                                                                                  dram-l4t.dts)... done.
copying minratchet_config(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb                                                                                                  1-bct-ratchet-p3767-0000.dts)... done.
copying device_config(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-bc                                                                                                  t-device-p3767-0000.dts)... done.
copying misc_config(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-bct-                                                                                                  misc-p3767-0000.dts)... done.
copying pinmux_config(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-bc                                                                                                  t-pinmux-p3767-dp-a03.dtsi)... done.
copying gpioint_config(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-b                                                                                                  ct-gpioint-p3767-0000.dts)... done.
copying pmic_config(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-bct-                                                                                                  pmic-p3767-0000-a02.dts)... done.
copying pmc_config(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-bct-p                                                                                                  advoltage-p3767-dp-a03.dtsi)... done.
copying deviceprod_config(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb                                                                                                  1-bct-cprod-p3767-0000.dts)... done.
copying prod_config(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-bct-                                                                                                  prod-p3767-0000.dts)... done.
copying scr_config(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb2-bct-s                                                                                                  cr-p3767-0000.dts)... done.
copying wb0sdram(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/generic/BCT/tegra234-p3767-0000-                                                                                                  wb0sdram-l4t.dts)... done.
copying bootrom_config(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-b                                                                                                  ct-reset-p3767-0000.dts)... done.
Existing uphylane_config(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/tegra234-mb1-bct-uphylan                                                                                                  e-si.dtsi) reused.
copying dev_params(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/generic/BCT/tegra234-br-bct-p3                                                                                                  767-0000-l4t.dts)... done.
copying dev_params_b(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/generic/BCT/tegra234-br-bct_                                                                                                  b-p3767-0000-l4t.dts)... done.
copying mb2bct_cfg(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb2-bct-m                                                                                                  isc-p3767-0000.dts)... done.
Existing pscfwfile(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/pscfw_t234_prod.bin) reused.
Existing pscbl1file(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/psc_bl1_t234_prod.bin) reused                                                                                                  .
Existing mtsmcefile(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/mce_flash_o10_cr_prod.bin) re                                                                                                  used.
Existing tscfwfile(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/tsec_t234.bin) reused.
Existing mb2applet(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/applet_t234.bin) reused.
Existing bootloader(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/mb2_t234.bin) reused.
copying initrd(/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/l4t_initrd.img)... done.
bl is uefi
Making Boot image... done.
Not signing of boot.img
Making recovery ramdisk for recovery image...
Re-generating recovery ramdisk for recovery image...
/home/ts/orin_nx_flash/Linux_for_Tegra/bootloader/ramdisk_tmp /home/ts/orin_nx_flash/Linux_for_Tegra/bootloader /home/ts/orin_nx_flash/Linux_for_Tegra
72826 blocks

gzip: /home/ts/orin_nx_flash/Linux_for_Tegra/kernel/Image: not in gzip format
_BASE_KERNEL_VERSION=5.15.148-tegra
command is failed
Error: failed to generate images
Cleaning up...

[tseanard]

This was resolved using a two step process:

1. Switched to a better USB cable, used one of the not-blue USB-A ports on the Raspberry PI, and re-established the Force-Recovery mode.
2. Comment out the line shown below (in the prepare_sshd_files() function) in the script file listed below, because the version of OpenSSH with Ubuntu 25.04 no longer supports the weak DSA algorithm!

Linux_for_Tegra/tools/ota_tools/version_upgrade/ota_make_recovery_img_dtb.sh

    # ssh-keygen -t dsa -N "" -f "${_initrd_dir}/${ssh_config_dir}/ssh_host_dsa_key" >/dev/null 2>&1;check_error