Intelligent IP Camera With AI Function | Seeed Studio Wiki

[giscus[bot]]

Intelligent IP Camera With AI Function | Seeed Studio Wiki

Introducing how to use Grove Vision AI V2 to build an intelligent web camera.

https://wiki.seeedstudio.com/grove_vision_ai_v2_webcamera/

[devigili]

Dear all,
I get the following error in the web server using cameras ov5647-160 FOV and ov5647-67 FOV "Failed to set resolution, please check the connection between your device and the camera sensor, then try again". Do you have any ideas?

[ReKST-117]

Please check whether the camera cable is correctly connected with your camera and Grove Vision AI. At the two end of flat cable, the side with metal pins should be always down. I mean, the metal side should face to PCB board while the blue plastic side should always face to air

[narayanandev]

I am having same issue with set resolution error. Camera is properly connected to grove vision . I verified it by running models separately in vision. I face problem only with esp32s3 sense and grove vision. The fetch resolution call returns 500 Internal server error

[ReKST-117]

I am assuming you connect Grove Vision AI V2 and XIAO esp32s3 sense together and try to upload model via SenseCraft? That doesn't make sense as the platform support use these modules separately not together.