Get Started with Wio Tracker 1110 | Seeed Studio Wiki

[giscus[bot]]

Get Started with Wio Tracker 1110 | Seeed Studio Wiki

Get Started with Wio Tracker 1110

https://wiki.seeedstudio.com/Get_Started_with_Wio-Trakcer_1110/

[klym-tatarnikov]

Tried some development options, now device is showing SN as 000000000000 and EUI 0 as well.
How to restore credentials?
Restore Factory - showing 'you have no options permission'

[klym-tatarnikov]

device id is 0000000
It's showing 'joined' but no information in SenseCraft.
Also tried TTN with my own gateway - it works but no information about location

---------- Booting ----------
Wio Tracker 1110 Dev Board
Firmware Version: v0.5
DevEUI:0000000000000000
Region:EU_868
Scan geolocation Interval(min):5
Read sensor data Interval(min):6
Semtech LBM versions:
-LR11xx system = hw:0x22, type:0x01, fw:0x0307
-LR11xx driver = v2.2.0
-Modem = v3.3.0
-LoRaWAN Stack = v1.0.4.1
-Regional params = v1.0.3.2
-GNSS = v2.1.0
-Wi-Fi = v2.1.0
----- Reset LR1110 to start Join the network -----
Request for Join the LoRaWAN network
----- JOINED -----
Send uplink packet to request current time from Cloud.
Start the timer every 10s to check if there are data need to be sent.
Set up the first boot packet after Joined
----- Timer for 10s -----
Request uplink at 37017
Sending Uplink Payload:19 80 00 05 01 00 00 7e 40 93 e0
----- Send LoRa Uplink Packet Done -----
Send LoRa Transmit Packet Done at RTC time 41 s,Uplink Packet: 1,Confirm Ack Packet: 0
----- Timer for 10s -----
----- Timer for 10s -----
----- Timer for 10s -----
Request uplink at 67023
Sending Uplink Payload:19 80 00 05 01 00 00 7e 40 93 e0
----- Send LoRa Uplink Packet Done -----
Send LoRa Transmit Packet Done at RTC time 70 s,Uplink Packet: 2,Confirm Ack Packet: 0
----- Timer for 10s -----
Unable to receive confirm Ack from LNS, Cache the current packet:198000050100007e4093e0

[nfs0619]

We recommend reflashing the firmware, following the documentation here:
https://wiki.seeedstudio.com/Get\_Started\_with\_Wio-Trakcer\_1110/#flash-firmware

If the issue still persists, I suggest reaching out to our technical support team at [email protected] with the detailed information, so they can provide you with faster and more in-depth guidance.