Connect to The Things Network | Seeed Studio Wiki

[giscus[bot]]

Connect to The Things Network | Seeed Studio Wiki

Connect_to_The_Things_Network

https://wiki.seeedstudio.com/SenseCAP_T1000_tracker_TTN/

[moonlight0551]

In the section re Adding A Sensor to TTN Console, some of the screen shot images are missing and shown as icons. It would be very helpful to see actual screenshots of the 'Provisioning Information ie Join EUI and Device EUI and where they can be found in the SenseCraft app.

[GeoCoders1974]

Did you ever get this to work?

[moonlight0551]

Yes eventually. Used the SenseCAP Sense app on my android. Connected to the sensor via bluetooth. Found for Australia TTN frequency setup, I had to select Other (Not TTN) whic opened up frequency band option and more importantly a selection for a sub band which for AUS is 2 otherwise the device never sends its join requent on the right frequency and can never join. Also you can now assign the TTN keys. These are not shown otherwise.

[GeoCoders1974]

Probably the worst instructions ever. Major jumps, missing information, etc. For such a great idea, great price, the product backend is horrible.

[Jessie219-web]

Hi there, thanks for your feedback, we will update this wiki to make it more detailed.

[HaViGit]

Indeed, very bad instructions for an over 300 euros product. As mentioned by GeoCoders1974: Horrible!

[HaViGit]

@GeoCoder1974: Did you finally succeed? Can you advice me?

[GeoCoders1974]

I did, but by trial and error. I wouldnt be much help.

[bkonnet]

Hi. I´m triying to set it in TTN. AU915, but if select it from the Lorawan repository there is not a way to use FSB1 or any other channel. How can this be done?
Also the decoder that is in the github repository is too long and it can not be used as is in TTN.

[nfs0619]

Hi, we recommend reaching out to our technical support team at [email protected] with your questions and suggestions for further assistance. Regarding your concern about the decoder being too long, we will consider optimizing it. Additionally, you can check our forum at https://forum.seeedstudio.com/ to see if other users have shared similar experiences. Thanks for your feedback!

[Pixeldieb]

Would love to see an Updated Chirpstack V4 in the Repository.
Submitted a simple conversion with Gemini AI.

[Jessie219-web]

you mean the decoder of Chirpstack V4? it should be the same as the TTN decoder: https://github.com/Seeed-Solution/SenseCAP-Decoder/blob/main/T1000/TTN/SenseCAP_T1000_TTN_Decoder.js