diff --git a/docs/Edge/reTerminal_E10xx/getting_started_with_reterminal_e1004.md b/docs/Edge/reTerminal_E10xx/getting_started_with_reterminal_e1004.md index 83353bfb48123..4d73134bf3382 100644 --- a/docs/Edge/reTerminal_E10xx/getting_started_with_reterminal_e1004.md +++ b/docs/Edge/reTerminal_E10xx/getting_started_with_reterminal_e1004.md @@ -23,13 +23,13 @@ last_update: ## Introduction -reTerminal E1004 is a 13.3 inch open-source full color ePaper display with up to 3-month battery life. Powered by ESP32-S3, it natively supports our SenseCraft HMI no-code UI platform for effortless dashboard creation, while supporting Home Assistant, Arduino and ESP-IDF for further development. With the E Ink® Spectra™ 6 full-color ePaper Display, it's perfect for digital frame, colorful dashboard visulization. +reTerminal E1004 is a 13.3 inch open-source full color ePaper display with up to 6-month battery life. Powered by ESP32-S3, it natively supports our SenseCraft HMI no-code UI platform for effortless dashboard creation, while supporting Home Assistant, Arduino and ESP-IDF for further development. With the E Ink® Spectra™ 6 full-color ePaper Display, it's perfect for digital frame, colorful dashboard visulization. ### Features - **High-Definition Color Display:** 13.3-inch E Ink® Spectra™ 6 Full Color ePaper Display with a high resolution of 1200x1600 pixels. - **Powerful Processing:** Powered by ESP32-S3 with 8MB PSRAM and 32MB Flash for robust performance. -- **Ultra-Low Power Consumption:** Built-in 5000mAh battery supports up to 3 months of usage on a single charge (Deep sleep mode). +- **Ultra-Low Power Consumption:** Built-in 5000mAh battery supports up to 6 months of usage on a single charge (refresh every 6 hours). - **No-Code UI Development:** Default firmware supports SenseCraft HMI for drag-and-drop dashboard creation and AI-assisted design. - **Wide Compatibility:** Supports Home Assistant (ESPHome), Arduino, PlatformIO, and ESP-IDF. - **Rich Connectivity:** Integrated 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5.0. diff --git a/docs/Sensor/ePaper/XIAO_ePaper_Display_Board_EE02/EE02_GettingStart.md b/docs/Sensor/ePaper/XIAO_ePaper_Display_Board_EE02/EE02_GettingStart.md index 4fa7b8d48c82f..ce99a343a44f4 100644 --- a/docs/Sensor/ePaper/XIAO_ePaper_Display_Board_EE02/EE02_GettingStart.md +++ b/docs/Sensor/ePaper/XIAO_ePaper_Display_Board_EE02/EE02_GettingStart.md @@ -9,6 +9,7 @@ keywords: - SenseCraft HMI image: https://files.seeedstudio.com/wiki/Epaper/EE02/ee02head.webp slug: /getting_started_with_ee02 +sku: 100067144 last_update: date: 2025-12-20 author: Allen diff --git a/docs/Sensor/ePaper/XIAO_ePaper_Display_Board_EE03/EE03_GettingStart.md b/docs/Sensor/ePaper/XIAO_ePaper_Display_Board_EE03/EE03_GettingStart.md new file mode 100644 index 0000000000000..6866a155fb406 --- /dev/null +++ b/docs/Sensor/ePaper/XIAO_ePaper_Display_Board_EE03/EE03_GettingStart.md @@ -0,0 +1,211 @@ +--- +description: Getting Started with EE03 10.3-inch E-ink Driver Board +title: Getting Started with XIAO ePaper Display Board - EE03 +keywords: + - E-ink + - Driver Board + - 10.3 inch + - ESP32 + - SenseCraft HMI +image: https://files.seeedstudio.com/wiki/Epaper/EE03/3-XIAO-ePaper-Display-Board-EE03-kit.jpg +slug: /getting_started_with_ee03 +sku: 100080566 +last_update: + date: 2026-03-1 + author: Jackson.Li +--- + +import Tabs from '@theme/Tabs'; +import TabItem from '@theme/TabItem'; +import Steppers from '@site/src/components/utils/Stepper'; + +## Introduction + +Powered by **XIAO ESP32-S3 Plus**, the ePaper driver board EE03 supports **10.3 Monochrome ePaper Display**. It features a JST 2.0 mm battery connector with power switch, built-in charging IC, and comes with one reset and three user buttons. Well-suited for low-power ePaper projects such as digital photo frames and information boards. + +
+ +### Features + +- **Built in XIAO ESP32-S3 Plus:** Works immediately when connected to a compatible ePaper display. +- **Dedicated 10.3" Monochrome ePaper Display Support:** Specifically designed for 10.3" high-speed refresh epaper display, ensuring quick setup and stable operation. +- **High-Speed Refresh Enabled:** Integrated T-CON timing control ensures precise high-speed driving, while the onboard SHT40 provides real-time temperature sensing for waveform compensation. +- **BAT Connector with Switch:** Provides simple battery connection and integrates a switch, enabling efficient power management and energy savings. +- **User-Friendly Buttons:** Features 1 reset button and 3 user-programmable buttons, providing flexibility for project acceleration and customizable functions. +- **SenseCraft HMI Firmware Pre-Flashed:** Simply plug in and start right away with SenseCraft HMI, our AI-powered no-code UI design platform. Choose from rich templates or drag-and-drop UI building (with optional AI assistance), and deploy to the ePaper display in just a few clicks. + +### Specification + +| Parameter | Description | +| :--- | :--- | +| **Processor** | XIAO ESP32-S3 Plus | +| **ePaper Connector** | FPC 40 Pin 0.5mm | +| **Battery Connector** | JST 2.0mm | +| **Switch** | Battery Power ON/OFF | +| **Power Supply** | - 3.7V Li-Battery
- USB Type-C | +| **Button** | - 1x Reset button
- 3x User button | + +### Application + +- **Digital E-Book Readers:** Deliver a paper-like monochrome reading experience with 16-level grayscale and fast refresh for smoother page turns and more responsive updates. +- **Real-Time Dashboard:** Display live information such as weather updates, calendar schedules, key notifications, and data widgets like energy usage, sensor status, or KPIs. +- **Security Alerts:** Display alerts and notifications about security events, such as motion detection or door/window sensor activation. +- **Public Transit Arrival Board:** Show real-time bus/train arrival times, route status, and service alerts at a glance for daily commuting. + +## Hardware Overview +
+ +- **USB Type-C**: For power supply and firmware flashing. +- **FPC Connector**: To connect the ePaper display. +- **Reset Button**: To reset the board. +- **User Buttons**: Programmable buttons for user interaction. +- **Power Switch**: Control the power of battery on/off. +- **Boot Button**: Used for entering bootloader mode. +- **LED Indicators**: Status indicators for power and charging. +- **JST Connector**: 2 pins JST 2.0mm connector to connect battery. + +## Getting Started with SenseCraft HMI + +This section will guide you through connecting your EE03 to the SenseCraft HMI platform, allowing you to easily update the screen content wirelessly. +:::tip +Please note that you need to burn the **SenseCraft HMI EE03 firmware** before you can use the SenseCraft HMI platform. +::: +
+### Equipment Installation + +**Step 1. Connect the Screen and Board** +Carefully connect the FPC cable of your ePaper screen to the connector on the EE03 driver board. Ensure the locking mechanism is secure. + +**Step 2. Power On** +Connect the EE03 board to a power source (computer or USB adapter) using a USB Type-C cable. Upon powering up, the screen will refresh and display a welcome image. + +
+ +**Step 3. Enter Network Configuration Mode** +After the welcome image, the screen will automatically refresh to show the Network Configuration interface. This indicates the device is ready to connect to Wi-Fi. +
+ + +### Network Configuration + +**Step 4. Configure Wi-Fi via Mobile Phone** +Use your mobile phone to scan the QR code displayed on the screen. Follow the prompts on your phone to enter your local Wi-Fi SSID and password to connect the EE03 to the internet. + +**Step 5. Obtain Pairing Code** +Once the network configuration is successful, the screen will refresh again and display a unique **Pairing Code**. You will need this code for the next step. +
+ +### Platform Binding & Update + +**Step 6. Bind Device on SenseCraft HMI** +Go to the [SenseCraft HMI Platform](https://sensecraft.seeed.cc/hmi/device). Log in to your account. Navigate to the device management section and select "Add Device". Enter the Pairing Code displayed on your E-ink screen. +
+**Step 7. Create and Push New Interface** +On the SenseCraft HMI platform, select the template suitable for the 10.3-inch screen to create a new interface or upload an image. +
+
+ +**Step 8. Apply your images** +Once finished, click the "Apply" button and select your EE03 device. + +
+ +**Step 9. Display on the screen** +Finally the EE03 will receive the data and refresh the 10.3-inch screen with your new content. + +
+ + +## Getting Started with Arduino + +### Install Seeed GFX Library + +:::tip +This library has same function as TFT library and no compatible with it. If you have installed TFT library or other similar display libraries, please uninstall it first. +::: + +Download and install the Seeed GFX library from GitHub. + +
+ +
+ +

+ +
+Scroll down and open this link. + +
+ +Select your device type and it will generate some code. Copy those code and we will use them later. + +:::tip +If you make the wrong choice, the screen will display nothing. + +So please make sure you select the correct device or component type. +::: + +
+ +After downloading the library, go to **Sketch** -> **Include Library** -> **Add .ZIP Library** and select the downloaded library. + +
+ + +### Configure and burn the program +Select the example shown in the figure + +
+ +Create a new "driver.h" file and paste those code into it. The code should be like: +```cpp +#define BOARD_SCREEN_COMBO 511 // 10.3 inch monochrome ePaper Screen（ED103TC2） +#define USE_XIAO_EPAPER_DISPLAY_BOARD_EE03 +``` + + +After that, go to **Tools** -> **Board** -> **XIAO ESP32S3 Plus** and **Tools** -> **Port** -> **Select the port your board is connected to**. + +
+ +Note that PSAM must be enabled. +
+ +Then click **Upload** to upload the code. +Now you will see the feedback in your epaper screen! Following are the results of Bitmap examples. +
+ + +## Troubleshooting + +**Q1: The screen does not refresh after powering on.** +* Check if the FPC cable is correctly inserted and locked. +* Ensure the USB Type-C cable provides sufficient power. +* Press the Reset button to restart the board. + +**Q2: Wi-Fi configuration fails.** +* Ensure your Wi-Fi network is 2.4GHz. +* Check if the Wi-Fi password was entered correctly. + +**Q3: The screen display is blurry or has ghosting.** +* This can happen if the screen hasn't been refreshed for a long time or if the power supply is unstable. Try refreshing the screen again via the HMI platform. + +## Resources +- **[PDF]** [Seeed Studio XIAO ePaper Display EE03 Schematic](https://files.seeedstudio.com/wiki/Epaper/EE03/XIAO_ePaper_Display_Board_EE03_V1.0_SCH_251217.pdf) +- **[ZIP]** [Seeed Studio XIAO ePaper Display EE03 PCBA&SCH](https://files.seeedstudio.com/wiki/Epaper/EE03/XIAO_ePaper_Display_Board_EE03_V1.0_SCH_&_PCB_251217.zip) + +## Tech Support & Product Discussion + +Thank you for choosing our products! We are here to provide you with different support to ensure that your experience with our products is as smooth as possible. + +
+
+ + +
+ +
+ + +
+
diff --git a/docs/Sensor/ePaper/XIAO_ePaper_Display_Board_EE03/_category_.yml b/docs/Sensor/ePaper/XIAO_ePaper_Display_Board_EE03/_category_.yml new file mode 100644 index 0000000000000..e54f1a0e17fd0 --- /dev/null +++ b/docs/Sensor/ePaper/XIAO_ePaper_Display_Board_EE03/_category_.yml @@ -0,0 +1,5 @@ +position: 2 +label: 'XIAO ePaper Display Board EE03' +collapsible: true +collapsed: true +className: xiao_epaper_display_board_ee03 diff --git a/docs/zh-CN/Sensor/SenseCAP/SenseCAP_Watcher/Applications/SenseCAP_Watcher_for_Xiaozhi_AI/_cn_Flash_Watcher_Agent_Firmware.md b/docs/zh-CN/Sensor/SenseCAP/SenseCAP_Watcher/Applications/SenseCAP_Watcher_for_Xiaozhi_AI/_cn_Flash_Watcher_Agent_Firmware.md index 7e9cbbbbc70f7..f2cd89885e208 100644 --- a/docs/zh-CN/Sensor/SenseCAP/SenseCAP_Watcher/Applications/SenseCAP_Watcher_for_Xiaozhi_AI/_cn_Flash_Watcher_Agent_Firmware.md +++ b/docs/zh-CN/Sensor/SenseCAP/SenseCAP_Watcher/Applications/SenseCAP_Watcher_for_Xiaozhi_AI/_cn_Flash_Watcher_Agent_Firmware.md @@ -15,6 +15,8 @@ last_update: author: Twelve --- + +# 测试版本,请忽略本维基。 # 刷写Watcher 小智版固件 ## 概述