diff --git a/sites/en/docs/Network/Meshtastic_Network/Solar_Node/Other Application/get_started_with_meshcore_solar_node.md b/sites/en/docs/Network/Meshtastic_Network/Solar_Node/Other Application/get_started_with_meshcore_solar_node.md
new file mode 100644
index 0000000000000..80ad0cb7bb353
--- /dev/null
+++ b/sites/en/docs/Network/Meshtastic_Network/Solar_Node/Other Application/get_started_with_meshcore_solar_node.md
@@ -0,0 +1,405 @@
+---
+description: Get Started with SenseCAP Solar Node for Meshcore & LoRa. Guiding for device installation, firmware flashing and device connection.
+title: Get Started with Meshcore
+keywords:
+- Meshcore
+- Solar
+image: https://files.seeedstudio.com/wiki/SenseCAP/Meshtastic/solar-node.webp
+slug: /get_started_with_meshcore_solar_node
+sku: 114993633,114993643
+sidebar_position: 1
+last_update:
+ date: 3/4/2026
+ author: Michelle Huang
+---
+
+:::danger note
+When the device is in the states below, please don't manually reboot or turn off it. Or else the device can be dead.
+1. Not finishing the message transmission process
+2. Being configured
+:::
+
+## Firmware Flashing
+
+### Method1 via Web Flasher
+
+Connect your device with a USB cable to the computer. Please make sure the cable supports data transmission.
+
+:::warning
+Please keep the USB cable connected while the data transmission, or else the device can be damaged.
+:::
+
+Go to the [Meshcore Web Flasher](https://flasher.meshcore.co.uk/).
+
+Choose `Seeed Studio SenseCAP Solar` in the `Community Firmware` group.
+
+
+
+Choose `Repeater`. If you want to flash other firmware, please [click here](https://github.com/meshcore-dev/MeshCore/blob/main/docs/faq.md) to see the tutorial.
+
+
+
+#### Flash Erase
+
+Click `Enter DFU Mode`, choose the serial port named "Solar Node" or "TinyUSB serial". Then click `Erase Flash` and choose the serial port.
+
+
+
+If you have clicked `Erase Flash` but there is no response, click `Enter DFU` again and then click `Erase Flash` to make sure you have successfully entered DFU.
+
+If you see "Flashing erase firmware:100%", the device has been successfully erased.
+
+
+
+#### Flash Firmware
+
+Select the firmware version.
+
+
+
+Click `Enter DFU Mode`, choose the serial port named "P1 Pro" or "TinyUSB" serial. Then click `Flash` and choose the serial port.
+
+
+
+If you have clicked `Flash` but there is no response, click `Enter DFU` again and then click `Flash` to make sure you have successfully entered DFU.
+
+When the progress bar is completely filled, it indicates that Flash has completed. Then the device will automatically reboot.
+
+
+
+### Method2 Drag and Drop
+
+Connect your device with a USB cable to the computer. Please make sure the cable supports data transmission.
+
+:::warning
+Please keep the USB cable connected while the data transmission, or else the device can be damaged.
+:::
+
+Go to the [Meshcore Web Flasher](https://flasher.meshcore.co.uk/).
+
+Choose `Seeed Studio SenseCAP Solar` in the `Community Firmware` group.
+
+
+
+Choose `Repeater`. If you want to flash other firmware, please [click here](https://github.com/meshcore-dev/MeshCore/blob/main/docs/faq.md) to see the tutorial.
+
+
+
+#### Flash Erase
+
+Download the UF2 file.
+
+
+
+Double click the RST button to manually enter DFU mode. You can see a disk named `Xiao-Boot` or `Solar Node` will pop out after 10~15 s.
+
+
+
+Drag the downloaded UF2 file to the pop-out disk.
+
+
+
+The disk will disappear after the firmware is successfully flashed. At this point there is no firmware in the device, so the device will `NOT` automatically reboot.
+
+#### Flash Firmware
+
+Choose the latest firmware version.
+
+
+
+Download the UF2 file.
+
+
+
+Double click the RST button to manually enter DFU mode. You can see a disk named `Xiao-Boot` or `Solar Node` will pop out after 10~15 s.
+
+
+
+Drag the downloaded UF2 file to the pop-out disk.
+
+
+
+The disk will disappear after the firmware is successfully flashed. At this point there is no firmware in the device, so the device will NOT automatically reboot.
+
+## Get Started
+
+Before formal deployment, please test and configure the node first.
+
+### Installation
+
+#### Assemble the Device
+
+:::danger note
+Since the device will be used outdoors for extended periods, please avoid installing the panel in a horizontal position. A tilted or diagonal installation is recommended to prevent water accumulation. Additionally, ensure that all screws are securely tightened and the cover is properly installed. For enhanced waterproof protection, you may also consider applying extra sealing measures.
+:::
+
+- **Part List**
+
+
+
+
+- Step1: Connect part 1 to the bottom of the device using washers and screws.
+
+
+
+
+
+- Step2: Connect the universal joint(part 2) and the bracket(part 3) with screws.
+
+
+
+
+
+- Step3: Connect the RF cable(part 4) and antenna(part 5) .
+
+
+
+
+
+- Step4: Install the hoop ring in the appropriate position.
+
+
+
+
+
+- Step5: Connect the universal joint bracket.
+
+
+
+
+
+- Step6: Loosen the screws, adjust the universal joint to the appropriate position, and then tighten the screws.
+
+
+
+
+
+- Step7: Connect the antenna to the device.
+
+
+
+
+
+
+
+#### Install Battery and GPS Module(Optional)
+
+:::tip
+When you need to install or replace the battery, use `Button-top` 18650(3.6V) battery.
+
+P1-Pro version has built-in battery and GPS module, for P1 version, user needs to install the battery and GPS module manually if needed.
+:::
+
+
+
+- Step 1: Remove all the screws and the cover.
+
+
+
+- Step 2: Install battery and the GPS module.
+
+
+
+
+
+- Step 3: Assemble the shell.
+
+
+
+:::caution note
+Ensure that the shell is properly mounted and the screws are firmly tightened to maintain the device’s waterproof integrity.
+:::
+
+#### (Optional) Upgrate atenna
+
+- You can replace the antenna with a fiberglass one by watching this video.
+
+If you need an antenna with higher gain, we recommend the [860-930MHz 3dBi fiberglass](https://www.seeedstudio.com/LoRa-Fiberglass-Antenna-Kit-with-base-860-930MHz-3dBi-360mm-p-5315.html) antenna and the [902-928MHz 5.8dBi fiberglass](https://www.seeedstudio.com/RF-Explorer-LoRa-Fiberglass-Antenna-Kit-902-930MHz-5-8dBi-800mm-p-5275.html) antenna.
+
+### Power on the device
+
+The device needs to be activated by connecting the USB cable. The blue Mesh LED will light on for about 3s, it means that the device has been successfully turned on.
+
+The blue mesh LED light will not turn on until it send advert.
+
+:::tip
+If the device doesn't respond when you insert the USB cable, please charge it first. Do not use the fast-charging charger.
+:::
+
+
+### Configuration
+
+[Click here](https://config.meshcore.dev/) to configure the repeater.
+
+import Tabs from '@theme/Tabs';
+import TabItem from '@theme/TabItem';
+
+In order to start communicating over the mesh, you must set your region. This setting controls which frequency range your device uses and should be set according to your regional location.
+
+Change the LoRa region and save setting. Then `**Reboot**` the device, or else the setting will not take effect.
+
+
+
+
+**Region List**
+
+|**Region Code**|**Description**|**Frequency Range (MHz)**|**Duty Cycle (%)**|**Power Limit (dBm)**|
+| :-: | :-: | :-: | :-: | :-: |
+|UNSET|Unset|N/A|N/A|N/A|
+|US|United States|902.0 - 928.0|100|30|
+|EU_868|European Union 868MHz|869.4 - 869.65|10|27|
+
+Refer to [LoRa Region by Country](https://meshtastic.org/docs/configuration/region-by-country/) for a more comprehensive list.
+
+:::info
+**EU_868** has to adhere to an hourly duty cycle limitation of 10%, calculated every minute on a rolling 1-hour basis. Your device will stop transmitting if you reach it, until it is allowed again.
+:::
+
+Now that you have set the LoRa region on your device, you can continue with configuring any [LoRa Configs](https://meshtastic.org/docs/configuration/radio/lora/) to suit your needs.
+
+
+### Set Rout
+
+Before adding the repeater to your route, you may need to use the repeater to send advert first. Repeater will automatically send automatically at regular intervals. This interval can be multiple hours (default 3 hours). So you need to manually send advert or else you need to wait.
+
+
+
+You can manually set the message sending path. Connect you Bluetooth companion device to your phone APP. Open a private message window. Then you can choose the discovered repeater to form your path.
+
+
+
+After setting the path, the transmission method will be changed to "n hop". For example, if you add 1 repeater in your route, it will change to 1 hop.
+
+
+
+## FAQ
+
+### Boot Loop
+
+- Reason
+
+This is usually caused by the firmware flashing failure. When flashing the firmware, please maintain a stable connection.
+
+- Troubleshoot
+
+Re-flash the firmware.
+
+### Device bricked
+
+#### Description
+
+The device not responding, no LED, can not pair with your App.
+
+**1) Device can still enter the DFU mode, then try to flash the bootloader**.
+
+#### Flash the Bootloader
+
+- [Bootloader download](https://files.seeedstudio.com/wiki/SenseCAP/Meshtastic/xiao_nrf52840_ble_bootloader.zip)
+
+:::danger note
+When you are flashing the bootloader, please make sure the cable connection is stable and **DO NOT** disconnect it during the flash process.
+:::
+
+**Step1: Adafruit-nrfutil Installation**
+
+**Prerequisites**
+
+- [Python3](https://www.python.org/downloads/)
+- [pip3](https://pip.pypa.io/en/stable/installation/)
+
+
+
+
+This is recommended method, to install latest version:
+
+```
+pip3 install --user adafruit-nrfutil
+```
+
+
+
+
+
+Use this method if you have issue installing with PyPi or want to modify the tool. First clone this repo and go into its folder.
+
+```
+git clone https://github.com/adafruit/Adafruit_nRF52_nrfutil.git
+cd Adafruit_nRF52_nrfutil
+```
+
+Note: following commands use `python3`, however if you are on Windows, you may need to change it to `python` since windows installation of python 3.x still uses the name python.exe
+
+To install in user space in your home directory:
+
+```
+pip3 install -r requirements.txt
+python3 setup.py install
+```
+
+If you get permission errors when running `pip3 install`, your `pip3` is older or is set to try to install in the system directories. In that case use the `--user` flag:
+
+```
+pip3 install -r --user requirements.txt
+python3 setup.py install
+```
+
+If you want to install in system directories (generally not recommended):
+
+```
+sudo pip3 install -r requirements.txt
+sudo python3 setup.py install
+```
+
+To generate a self-contained executable binary of the utility (Windows and MacOS), run these commands:
+
+```
+pip3 install pyinstaller
+cd Adafruit_nRF52_nrfutil
+pip3 install -r requirements.txt
+cd Adafruit_nRF52_nrfutil\nordicsemi
+pyinstaller __main__.py --onefile --clean --name adafruit-nrfutil
+```
+
+You will find the .exe in `Adafruit_nRF52_nrfutil\nordicsemi\dist\adafruit-nrfutil` ( with `.exe` if you are on windows).
+Copy or move it elsewhere for your convenience, such as directory in your %PATH%.
+
+
+
+
+**Step2: Check your port number**
+
+Connect your device to your PC, and check the port number.
+
+Example:
+
+
+**Step3: Flash the bootloader**
+
+In the terminal or command prompt, navigate to the directory where you downloaded the bootloader zip package and execute the following command, replacing the correct port for your device:
+
+- **For Windows**:
+
+```
+adafruit-nrfutil --verbose dfu serial --package xiao_nrf52840_ble_bootloader.zip -p COMXX -b 115200 --singlebank --touch 1200
+```
+
+- **For others**:
+
+```
+adafruit-nrfutil --verbose dfu serial --package xiao_nrf52840_ble_bootloader.zip -p /dev/tty.SLAB_USBtoUART -b 115200 --singlebank --touch 1200
+```
+
+
+
+When you have completed the above steps, then you can flash the application firmware.
+
+### Signal Quality
+
+- **SNR** reflects the quality of the communication link. Normal device usually operates above -7 dB. Device with a SNR lower than -10 dB indicates poor performance.
+
+- **RSSI** is determined jointly by the device and its surrounding environment. Normal device usually operates above -110 dBm. Device with an RSSI lower than -115 dBm is considered to have poor performance.
+
+ To achieve the best signal effect, please use the device in an open, unobstructed area with minimal interference for use.
+
+## Resource
+- [Solar Node Battery Life Calculation Table](https://files.seeedstudio.com/products/SenseCAP/Wio-Tracker/Solar%20Node%20Consumption%20Test%20and%20Battery%20Life%20Calculation.xlsx)
diff --git a/sites/en/docs/Network/Meshtastic_Network/T1000-E/sensecap_t1000_e_meshcore.md b/sites/en/docs/Network/Meshtastic_Network/T1000-E/Other Application/sensecap_t1000_e_meshcore.md
similarity index 95%
rename from sites/en/docs/Network/Meshtastic_Network/T1000-E/sensecap_t1000_e_meshcore.md
rename to sites/en/docs/Network/Meshtastic_Network/T1000-E/Other Application/sensecap_t1000_e_meshcore.md
index 3dabcfd26cd23..b19ba64ecf7d1 100644
--- a/sites/en/docs/Network/Meshtastic_Network/T1000-E/sensecap_t1000_e_meshcore.md
+++ b/sites/en/docs/Network/Meshtastic_Network/T1000-E/Other Application/sensecap_t1000_e_meshcore.md
@@ -1,5 +1,5 @@
---
-description: Guide to flashing MeshCore firmware on the T1000-E via Web USB or drag-and-drop, along with app configuration for LoRa region, GPS, and sending messages.
+description: Get Started with SenseCAP Card Tracker T1000-E for Meshcore. Guiding for device installation, firmware flashing and device connection.
title: Get Started with Meshhcore
keywords:
- Tracker
@@ -8,7 +8,7 @@ slug: /sensecap_t1000_e_meshcore
sku: 114993369
sidebar_position: 3
last_update:
- date: 3/2/2026
+ date: 3/4/2026
author: Michelle Huang
createdAt: '2026-02-28'
updatedAt: '2026-03-03'
@@ -230,7 +230,7 @@ import TabItem from '@theme/TabItem';
- Change the charging cable
- - If still no luck, press and hold the device button, then connect the charging cable, see whether or not the a disk pop out in your PC. If so, re-install the bootloader. The tutorial can be found below.
+ - If still no luck, press and hold the device button, then connect the charging cable, see whether or not the a disk pop out in your PC. If so, [click here](https://wiki.seeedstudio.com/sensecap_t1000_e_meshcore/#flash-the-bootloader) to re-install the bootloader.
### Device stuck in boot loop
@@ -363,7 +363,7 @@ adafruit-nrfutil --verbose dfu serial --package t1000_e_bootloader-0.9.1-5-g4887
-When you have completed the above steps, then you can go to flash the application firmware.
+When you have completed the above steps, then [click here](https://wiki.seeedstudio.com/sensecap_t1000_e_meshcore/#firmware-flashing) to flash the application firmware.
**2) Device can not enter DFU mode, but the serial port can be detected**.
@@ -372,7 +372,7 @@ When you have completed the above steps, then you can go to flash the applicatio
- Set the baud rate to `1200`.
- Connect the device.
- The light will flash briefly when you connect it. Keep trying this until the light stays on, means the device can back to DFU mode, then flash bootloader-> Erase flash -> flash the firmware
+ The light will flash briefly when you connect it. Keep trying this until the light stays on, means the device can back to DFU mode, then flash [bootloader](https://wiki.seeedstudio.com/sensecap_t1000_e_meshcore/#flash-the-bootloader)-> [Erase flash](https://wiki.seeedstudio.com/sensecap_t1000_e_meshcore/#flash-erase) -> [flash the firmware](https://wiki.seeedstudio.com/sensecap_t1000_e_meshcore/#flash-firmware)
**3) Device can not enter DFU mode and no serial port display**
@@ -407,12 +407,12 @@ When you have completed the above steps, then you can go to flash the applicatio
#### Troubleshoot
-Perform a flash-erase.
+Perform a [flash-erase](https://wiki.seeedstudio.com/sensecap_t1000_e_meshcore/#flash-erase).
### Factory Reset
If you want to restore to the default settings, you can do the factory reset. There are two methods for you to do the factory reset.
-- Flash erase the device. And then re-flash the latest firmware.
+- [Flash erase](https://wiki.seeedstudio.com/sensecap_t1000_e_meshcore/#flash-erase) the device. And then re-flash the latest firmware.
- Click the `Factory Reset` Button on the App. The device will reboot with the factory configuration automatically.
diff --git a/sites/en/docs/Network/Meshtastic_Network/Wio_Tracker_L1/get_started_with_other_mesh_firmware.md b/sites/en/docs/Network/Meshtastic_Network/Wio_Tracker_L1/Other Application/get_started_with_other_mesh_firmware.md
similarity index 94%
rename from sites/en/docs/Network/Meshtastic_Network/Wio_Tracker_L1/get_started_with_other_mesh_firmware.md
rename to sites/en/docs/Network/Meshtastic_Network/Wio_Tracker_L1/Other Application/get_started_with_other_mesh_firmware.md
index c44700630b647..89a82dc81c3cd 100644
--- a/sites/en/docs/Network/Meshtastic_Network/Wio_Tracker_L1/get_started_with_other_mesh_firmware.md
+++ b/sites/en/docs/Network/Meshtastic_Network/Wio_Tracker_L1/Other Application/get_started_with_other_mesh_firmware.md
@@ -6,9 +6,9 @@ keywords:
image: https://files.seeedstudio.com/wiki/SenseCAP/Meshtastic/wio-tracker-l1.webp
slug: /get_started_with_other_mesh_firmware
sku: 114993648,114993649,114993653,114993654
-sidebar_position: 3
+sidebar_position: 1
last_update:
- date: 3/2/2026
+ date: 3/4/2026
author: Michelle Huang
createdAt: '2026-02-28'
updatedAt: '2026-03-03'
@@ -175,13 +175,13 @@ You can go to APP `Position Settings` to enable GPS. Or you can go to device GPS
Click the User button four times to control the buzzer turning on or off.
-
+
## Message Transmission
If you have two supported devices, and there are not many MeshCore users near you, flash both to BLE Companion firmware so you can use your devices to communicate with your nearby friends and family.
-
+
### Advert
@@ -230,7 +230,7 @@ When you are flashing the bootloader, please make sure the cable connection is s
- step 4: Flash the firmware
- When you have completed the above steps, then you can follow this [step](https://wiki.seeedstudio.com/get_started_with_meshtastic_wio_tracker_l1/#flash-firmware) to flash the application firmware. You may need to [enter the DFU mode manually](https://wiki.seeedstudio.com/get_started_with_meshtastic_wio_tracker_l1/#unable-to-enter-dfu--entering-dfu-mode-manually)
+ When you have completed the above steps, then you can follow this [step](https://wiki.seeedstudio.com/get_started_with_other_mesh_firmware/#flash-firmware-1) to flash the application firmware. You may need to [enter the DFU mode manually](https://wiki.seeedstudio.com/get_started_with_meshtastic_wio_tracker_l1/#unable-to-enter-dfu--entering-dfu-mode-manually)
### Unable to enter DFU & Entering DFU Mode Manually
@@ -252,12 +252,12 @@ Press the `User` button once to exit DFU mode.
#### Troubleshoot
-Flash Erase the firmware
+[Flash Erase](https://wiki.seeedstudio.com/get_started_with_other_mesh_firmware/#flash-erase-1) the firmware
### Factory Reset
If you want to restore to the default settings, you can do the factory reset. There are two methods for you to do a factory reset.
-- Flash Erase the firmware
+- [Flash Erase](https://wiki.seeedstudio.com/get_started_with_other_mesh_firmware/#flash-erase-1) the firmware
- Click the `Factory Reset` button on the app. The device will reboot with the factory configuration automatically.
diff --git a/sites/en/docs/Network/Meshtastic_Network/XIAO_ESP32S3_&_SX1262_Kit/Application/xiao_esp32s3_&_wio_sx1262_kit_mqtt.md b/sites/en/docs/Network/Meshtastic_Network/XIAO_ESP32S3_&_SX1262_Kit/Application/xiao_esp32s3_&_wio_sx1262_kit_mqtt.md
index 8225d1e0c89a8..0138c724bf719 100644
--- a/sites/en/docs/Network/Meshtastic_Network/XIAO_ESP32S3_&_SX1262_Kit/Application/xiao_esp32s3_&_wio_sx1262_kit_mqtt.md
+++ b/sites/en/docs/Network/Meshtastic_Network/XIAO_ESP32S3_&_SX1262_Kit/Application/xiao_esp32s3_&_wio_sx1262_kit_mqtt.md
@@ -1,12 +1,12 @@
---
-description: Guide to setting up a Meshtastic MQTT gateway using the XIAO ESP32S3 and Wio-SX1262, bridging LoRa mesh networks to the internet for global message exchange.
+description: Meshtastic MQTT Gateway Setting Tutorial based on XIAO ESP32S3 & Wio-SX1262 Kit. Enables global messaging, provides a backup when mesh signals are weak, and ensures faster message delivery via the internet.
title: Setting up MQTT Gateway
image: https://files.seeedstudio.com/wiki/XIAO_ESP32S3_for_Meshtastic_LoRa/2.png
slug: /xiao_esp32s3_&_wio_sx1262_kit_mqtt
sku: 102010611,113110064
sidebar_position: 1
last_update:
- date: 3/2/2026
+ date: 3/4/2026
author: Michelle Huang
createdAt: '2026-02-28'
updatedAt: '2026-03-03'
@@ -24,7 +24,7 @@ Integrating MQTT with Meshtastic extends off-grid communication by bridging dist
## Hardware Preparation
-Setting up a Meshtastic Gateway requires a device that can both run LoRa and Wifi. Additionally, if you want to share your location via mqtt, you can add a GPS module.
+Setting up a Meshtastic Gateway requires a device that can both run LoRa and Wifi. Additionally, if you want to share your gateway's location via mqtt, you can add a GPS module.
@@ -51,8 +51,6 @@ Setting up a Meshtastic Gateway requires a device that can both run LoRa and Wif
## Hardware Installation
-Before using Meshtastic, the device needs to be connected first. There are two connection methods. The first one is to use an expansion board, and the corresponding information will be displayed on the display. Then, the configuration can be carried out on the corresponding platform according to the reflected information. The second one is to connect the XIAO and the Wio-SX1262 module, and use a serial port tool to obtain the node ID and password.
-
### Connected to battery
The XIAO ESP32S3 has a built-in power management chip that allows the XIAO ESP32S3 to be powered independently by using a battery or to charge the battery through the XIAO ESP32S3's USB port.
@@ -60,7 +58,7 @@ The XIAO ESP32S3 has a built-in power management chip that allows the XIAO ESP32
If you want to connect the battery for XIAO, we recommend you to purchase qualified rechargeable `3.7V lithium` battery with `protection circuit`. When soldering the battery, please be careful to distinguish between the positive and negative terminals. The negative terminal of the power supply should be the side closest to the USB port, and the positive terminal of the power supply is the side away from the USB port.
-
+
### Connected to SX-1262
@@ -88,8 +86,6 @@ The compatible SX-1262 can only be bought within the kit.
### Step2 Check your Device ID
-
-
The device ID is normally the last four digits of the MAC address. You can open the serial port monitor to check.
Conect the device via a USB cable. Then [click here](https://flasher.meshtastic.org/#) to go to the Meshtastic web flasher. Click `Open the serial port monitor`. Select the Device as `Seeed XIAO S3` or `Tiny USB XXX`
@@ -143,12 +139,18 @@ open the Meshtastic Android app and connect to your device via Bluetooth. The de
After this configuration, your device will not be able to connect to your APP via Bluetooth. But it can connect to your APP via network.
-- Fill in the SSID and the password. The wifi you expect to use should be 2.4G.
+- Fill in the SSID (Wifi Name) and the Wifi password. The wifi you expect to use should be 2.4G.
- Click Send
- The device reboots automatically.
+**5. APP Connection**
+
+Now your device can not be connected via Bluetooth. But you can connect via Network.
+
+
+
@@ -185,12 +187,18 @@ After this configuration, your device will not be able to connect to your APP vi
After this configuration, your device will not be able to connect to your APP via Bluetooth. But it can connect to your APP via network.
-- Fill in the SSID and the password. The wifi you expect to use should be 2.4G.
+- Fill in the SSID (Wifi Name) and the Wifi password. The wifi you expect to use should be 2.4G.
- Click Send
- The device reboots automatically.
+**5. APP Connection**
+
+Now your device can not be connected via Bluetooth. But you can connect via Network.
+
+
+
@@ -198,7 +206,7 @@ After this configuration, your device will not be able to connect to your APP vi
Now you can communicate with other people from internet.
-
+
If you have another Meshtastic device that is in the same frenquency band with the ESP32S3 MQTT Gateway, it can transmit message via the ESP32S3 with other people in internet too.
