Update SmolSlimeConfigurator Page

* Update SmolSlimeConfigurator.md

* docs: PR Clean-up

---------

Co-authored-by: ShineBrightMeow <[email protected]>

Author: ICantMakeThings

src/smol-slimes/firmware/SmolSlimeConfigurator.md

@@ -6,48 +6,50 @@ Github page: [SmolSlimeConfigurator](https://github.com/ICantMakeThings/SmolSlim
 
 # Features
 
-- **Easy-to-use interface** — clean, modern, and simple to navigate.
+- **Easy-to-use interface** — clean, modern, simple to use, with helpful tooltips.
 - **Effortless configuration** — one-click buttons for calibration, pairing, and more.
-- **Helpful tooltips** — hover over any button to see what it does, perfect for beginners.
-- **Automatic firmware updater** — just plug your tracker in via USB, select your firmware type, and flash the latest build instantly.
+- **Automatic firmware updater** — plug your tracker in via USB, select your firmware type, and flash the latest build instantly.
 - **Always up to date** — the firmware list automatically fetches the latest daily builds from GitHub.
-- **Custom firmware support** — flash your own `.uf2` file with a single click.
-- **Favorites system** — star your most-used firmware versions by right-clicking.
+- **Custom firmware support** — flash your own `.uf2` or `.hex` files with ease (now supports all dongles and trackers).
+- **Favorites system** — star your most-used firmware versions by right-clicking (middle-click on macOS).
 - **Cross-platform** — available for **Windows**, **Linux**, **macOS**, and **Android**.
 - **Theme customization** — switch between **light/dark mode** and choose your favorite accent color.
 
+
 # Download
-There are 2 options to run the Configurator:
+There are two options to run the Configurator:
 - Single-file executables are available from [Releases](https://github.com/ICantMakeThings/SmolSlimeConfigurator/releases) (Windows, Linux, macOS, Android).
 - Python file from the uploaded files above.
 - To build it from source, run:
 ```bash
-pyinstaller --onefile --windowed --icon=icon.png --add-data "icon.png:." SmolSlimeConfiguratorVx.py
+pyinstaller --onefile --windowed --icon=icon.png --add-data "icon.png:." --add-binary "/Location/To/UR/NameOfVenv/bin/nrfutil:." SmolSlimeConfiguratorV8.py
 ```
+*Note: You **must** use a virtual environment, **must** use Python 3.10.x, and change the icon file extension to `.icns` on macOS or `.ico` on Windows.*
+
 
 # Instructions
 **Note:** There is a [video tutorial](https://youtu.be/2PHelwy7Rcs) explaining general usage, and [this video](https://www.youtube.com/watch?v=ENINHh4L8tk) covers **Android usage** in detail.
 
 ### **First install**
 
-+ Plug in the tracker or reciever, press reset twice, or on boards that dont have a button, hold one side of a wire on rst pin ![rst-pin](../assets/img/ect/NiceNano-RST.png)
-and double tap a gnd pin (The usbc connector on the Nice!Nano/ProMicro)![nicenano-usbc-header](../assets/img/ect/NiceNano-USBC.png)
++ Plug in the tracker or receiver and press reset twice. On boards without a reset button, hold one side of a wire on the RST pin ![rst-pin](../assets/img/ect/NiceNano-RST.png)
+and double-tap a GND pin (the USB-C connector on the Nice!Nano/ProMicro) ![nicenano-usbc-header](../assets/img/ect/NiceNano-USBC.png)
 + Press "↻" refresh, then select the port from the dropdown menu on the left of the refresh button, then press "Connect"
 + Select the version of hardware from the dropdown menu called "Select Firmware", press "⬇ Firmware",  Wait ~20 seconds, the tracker will flash.
 
 ### **Pairing**
-  
-+ Plug in your Reciever, press "↻" refresh and select the port And then press "Connect"
-+ To Configure your reciever, select the reciever tab, press pairing mode and power on each reciever one by one, you should notice ![image](../assets/img/ect/SerialSSC.png) the trackers being added, once all the trackers have been paired, press "Exit Pairing Mode"
+
++ Plug in your receiver, press "↻" refresh, select the port, then press "Connect".
++ To configure your receiver, select the receiver tab, press pairing mode, and power on each receiver one by one. You should notice ![image](../assets/img/ect/SerialSSC.png) the trackers being added. Once all trackers have been paired, press "Exit Pairing Mode".
 
 ### **Calibration**
 
-+ Plug in a tracker, Press "↻" refresh, select the COM port & "Connect", press "Calibrate 6 Sides", do what the terminal says.
-+ Then press "Calibrate", leave the tracker on a desk for 5~ seconds and done!
-**Note: You can also doubble tap the trackers button instead of pressing "Calibrate"**
++ Plug in a tracker, press "↻" refresh, select the COM port, and press "Connect". Press "Calibrate 6 Sides" and follow the terminal instructions.
++ Then press "Calibrate", leave the tracker on a desk for ~5 seconds, and you're done!
+**Note:** You can also double-tap the tracker's button instead of pressing "Calibrate".
 
 ### **Updating Firmware**
 
 + Connect to the port, select the firmware, press "⬇ Firmware" and wait ~20 seconds.
 
-**Note: Trackers and recievers need to be all updated on the same version or they wont want to pair**
+**Note:** Trackers and receivers must all be updated to the same version, or they will not pair.