Update README for Inkplate 6PLUS

Author: davidzovko

README.md

@@ -2,59 +2,25 @@
 
 ![](https://www.crowdsupply.com/img/cf95/compare-peripheral_jpg_project-body.jpg)
 
-Arduino library for all-in-one e-paper displays named Inkplate can be found in this repo. Inkplate is a series of powerful, Wi-Fi enabled ESP32-based e-paper display products. Its main feature is simplicity. Just plug in a USB cable, open Arduino IDE, and change the contents of the screen with few lines of code. Inkplate currently includes Inkplate 10 and Inkplate 6 - learn more about Inkplates on [official website](https://inkplate.io/). 
-Inkplate 6 was crowdfunded on [Crowd Supply](https://www.crowdsupply.com/e-radionica/inkplate-6), as well as [Inkplate 10](https://www.crowdsupply.com/e-radionica/inkplate-10).
+Arduino library for all-in-one e-paper display family named Inkplate can be found in this repo. Inkplate is a series of powerful, Wi-Fi enabled ESP32-based e-paper display products. Its main feature is simplicity. Just plug in a USB cable, open Arduino IDE, and change the contents of the screen with few lines of code. Inkplate family currently includes Inkplate 10, Inkplate 6 and Inkplate 6PLUS - learn more about Inkplates on [official website](https://inkplate.io/). 
+Inkplate 6 was crowdfunded on [Crowd Supply](https://www.crowdsupply.com/e-radionica/inkplate-6), as well as [Inkplate 10]([https://www.crowdsupply.com/e-radionica/inkplate-10). [Inkplate 6PLUS](https://www.crowdsupply.com/e-radionica/inkplate-6plus) is funding now.
 
-### Setting up Inkplate 6 in Arduino IDE
+### Setting up Inkplate in Arduino IDE
 
-In order to get a head start with Inkplate 6, follow these steps:
+In order to get a head start with Inkplate (any), follow these steps:
 
-1. [Install Inkplate 6 board definition](https://e-radionica.com/en/blog/add-inkplate-6-to-arduino-ide/) - add Inkplate 6 as a board into your Arduino IDE. Follow the instructions on the [link](https://e-radionica.com/en/blog/add-inkplate-6-to-arduino-ide/).
+1. [Install Inkplate board definition](https://github.com/e-radionicacom/Croduino-Board-Definitions-for-Arduino-IDE/blob/master/README.md) - add Inkplate 6/10/6PLUS as a board into your Arduino IDE. Follow the instructions on the [link](https://e-radionica.com/en/blog/add-inkplate-6-to-arduino-ide/).
 2. Install CH340 drivers (if you don't have them yet) - instructions [here](https://e-radionica.com/en/blog/ch340-driver-installation-croduino-basic3-nova2/)
-3. Install Inkplate 6 Arduino library - install the library from this repo into your Arduino IDE. If you don't know how, check our [tutorial](https://e-radionica.com/en/blog/arduino-library/#Kako%20instaliraty%20library?).
-4. You are ready to get started! Select Tools -> Board -> Inkplate 6, as well as correct COM port and upload!
+3. Install Inkplate Arduino library - install the library from this repo into your Arduino IDE. If you don't know how, check our [tutorial](https://e-radionica.com/en/blog/arduino-library/#Kako%20instaliraty%20library?).
+4. You are ready to get started! Select Tools -> Board -> Inkplate (pick correct one), as well as correct COM port and upload!
 
 ### Code examples
 
-There are many examples in the library that you demonstrate how to use any of the Inkplate functionality. Use Basic folder to get familiar with principles of using the Inkplate, such as modes (BW and Gray), how to write graphics and text. In Advanced folder, you'll learn how to make HTTP/HTTPS requests, utilise low power, use touchpads or SD card. Finally, get easily started on some projects. More are added daily, such as projects or community contributions.
+There are many examples in the library that you demonstrate how to use any of the Inkplate functionality. Use Basic folder to get familiar with principles of using the Inkplate, such as modes (BW and Gray), how to write graphics and text or just basic capabilites such as touchscreen or front lighting (if your Inkplate supports it). In Advanced folder, you'll learn how to make HTTP/HTTPS requests, utilise low power, use touchpads or SD card. Finally, get easily started on some projects. More are added regularly, such as projects or community contributions.
 
 ### Documentation
 
-
-Find Inkplate documentation [here](https://inkplate.readthedocs.io/en/latest/get-started.html). 
-   1.1. Basic BW - use the screen in BW mode (graphics & text)
-
-   1.2. Basic Gray - use the screen in gray mode (graphics & text)
-
-   1.3. Basic Partial Update - do a partial update of the screen on Inkplate 6
-
-   1.4. Basic Custom Fonts - add custom fonts and use them to write text on the screen
-
-2. **Advanced Inkplate Functionality**
-
-   2.1. WiFi HTTP Request - make HTTP request while connected too WiFi
-
-   2.2. Low Power - put Inkplate in sleep in order to save battery
-
-   2.3. Battery Voltage And Temperature - measure battery voltage and temperature of the board
-
-   2.4. Touchpads - get readings from onboard touch pads
-
-   2.5. SD Pictures - show .bmp, .jpg and .png images from the SD card on the screen
-
-   2.6. Web Pictures - show .bmp, .jpg and .png images from the web
-
-   2.7. Inkplate SD TXT File - read .txt file from the SD card and show it on the screen
-
-   2.8. easyC - use easyC ecosystem (I2C) and read a sensor value
-
-   2.9. MCP23017 Expander - use onboard MCP23017 expander for your own external devices
-
-   2.10. Web Server - make Inkplate a web server
-
-3. **Others**
-
-   3.1. Peripheral Mode - mode that enables control of the screen from any external device using UART
+Find Inkplate documentation [here](https://inkplate.readthedocs.io/en/latest/arduino.html). 
 
 
 ### Using Inkplate 6 with another microcontroller - Peripheral mode
@@ -79,7 +45,7 @@ apt install python-is-python3
 
 ### Micropython
 
-If you are looking for micropython support, please find all details [here](https://github.com/e-radionicacom/Inkplate-6-micropython).
+If you are looking for micropython support, please find all details [here](https://github.com/e-radionicacom/Inkplate-micropython).
 
 ### License
 
@@ -90,9 +56,9 @@ This repo uses the source code from another repositories. All their license file
 All of Inkplate-related development is open-sourced:
 
 - [Arduino library](https://github.com/e-radionicacom/Inkplate-6-Arduino-library)
-- [Inkplate 6 hardware](https://github.com/e-radionicacom/Inkplate-6-hardware)
+- Hardware design: [Inkplate 6](https://github.com/e-radionicacom/Inkplate-6-hardware), [Inkplate 10](https://github.com/e-radionicacom/Inkplate-10-hardware)
 - [micropython Inkplate](https://github.com/e-radionicacom/Inkplate-6-micropython)
-- [OSHWA certificate](https://certification.oshwa.org/hr000003.html)
+- OSHWA cerfiticate: [Inkplate 6](https://certification.oshwa.org/hr000003.html), [Inkplate 10](https://certification.oshwa.org/hr000006.html)
 
 ### Where to buy & other