Inkplate_Wake_Up_On_Touchpads Doesn't Work on 6COLOR

[GiantSox]

Hi there!

The Inkplate_Wake_Up_On_Touchpads sample doesn't seem to work on my 6COLOR. I've been tapping all 3 touchpads and nothing happens.

What does work:

• The non-sleeping Inkplate_Touchpads sample prints to the serial monitor as I'd expect when pressing the touchpads.
• Pressing the wake button or waiting for the timer in Inkplate_Wake_Up_On_Touchpads wakes it up, but the touchpads do nothing.

Any help would be appreciated!

[ifadiga]

Hi,
Can you try a solution from issue #169 (comment)
I think that it will help you.

[GiantSox]

@ifadiga Thanks for the link -- saw that issue but somehow totally missed the touchpad-related parts.

I specifically want to figure out how to wake the MCU from sleep when a touchpad is pressed, as the sample suggests I can do. My goal is to be able to use the Inkplate as a sign that runs on battery, and change its state when I press a touchpad.

I'm new to this so apologies for the potentially very basic questions.

[ifadiga]

Hi,
I'm sorry for not getting back to you sooner. Can you send a picture of your Inkplate to me? I need to know which Inkplate 6COLOR you have to help you.

[BornaBiro]

@GiantSox Can you please send the picture(s) of the Inkplate that you have, just to be sure, so we can give you a few solutions to this problem?

[GiantSox]

Sorry for my delay--this is just a hobby project and life has gotten very busy for me these past few weeks.

If I understand correctly, the touchpads are connected to the IO multiplexer, which is connected over i2c, and I'm a bit clueless as to how to make it wake up the ESP from sleep. I haven't had time to dedicate to this project in a few weeks but I was thinking that writing a ULP program to poll the touchpad state might work. If there's a simpler solution that'd be great, but learning how to program the ULP processor sounds like a fun learning experience for me when I eventually have more time :)

[matthewmmorrow]

@GiantSox Can you share links to the "Inkplate_Wake_Up_On_Touchpads" and "Inkplate_Touchpads" you've tried? I'm trying to get the same thing working but I don't see any examples for the 6COLOR, only other boards. When I try one of the other examples, I can't build the sketch because readTouchpads doesn't seem to be defined for the 6COLOR.

I'm trying to wake from deep sleep when pressing a touchpad. I have the wakeup button working with esp_sleep_enable_ext0_wakeup(GPIO_NUM_36, LOW); GPIO_NUM_34 which is for some of the other boards' touchpads is always low. Does anyone know which pin the I/O extender INT is connected to on the 6COLOR and what is it's active state?

Trying to use getTouchpadState from linked comment didn't give me any change in output to the serial monitor but I'm not sure if I was calling it correctly.

My board looks the same as in the picture. I'm using 6.0.0 of the library and 3.0.1 of the board definition.

[BornaBiro]

@GiantSox There is no need to poll the I/O expander with ULP on the I2C bus, as the expander has a pin change interrupt functionality. That means an INT pulse will fire from the I/O expander whenever a certain pin changes its state. And INT pin from the I/O expander is connected to the GPIO34 of the ESP32. So by just enabling interrupt on one of the I/O expander pins and enabling ESP32 to be woken up on GPIO34, you can wake up ESP32 with touchpads.

@matthewmmorrow For some reason, this example is missing from the library. It must have been accidentally removed when the library was updated (and also the library broke for the same reason and you see this error). We will fix that and push an update on the library as soon as possible. Thanks for pointing that out!
BTW: By using the function getTouchpadState() did the output stuck at 0 or 1 for each touchpad?

[bernji]

First of all, congratulations in this nice product and the effort you guys put into this.
I have the same (old) 6Color board and issue.

@BornaBiro The issue is open over a month. When can we expect the touchpads to be working?
I would love to wake up the board when a touchpad has been pressed and find out which one. Ideally with a working example for each of them or an example for both working together. As I am not a pro I do not really understood your guide of how to wake up the board on I7O expander and on how to enable the wakeup of touchpads press. An example would be ideal.

[KarloLeksic]

Hi @bernji,

Sorry for the late response, we are a bit busy.
Here is an unofficial version of this example. You can use it, it should work, but maybe it will change a little.

[bernji]

Hi @KarloLeksic,

thank you. How do I find out which button has been pressed?

[KarloLeksic]

Hi @bernji,

The PCAL expander remembers which pin triggered the interrupt, and if you read its register at the beginning of the code, you should be able to read from which pin. But if you call display.begin(), that register will be deleted. You can initialize i2c communication with Wire.begin(), then call display.getINT(). That function returns uint16_t and each bit represents one pin from which the interrupt occurred. One bit should be set to 1, and the position of that bit represents the pin from which the interrupt occurred.

[bernji]

Hi @KarloLeksic. I cannot confirm that the code for wakeup on touchpads works that you pointed to (Here)

When i run the code I see errors as follows and the board restarts and shows "Wakeup caused by touchpads" although I have never touched any touchpad.

rst:0x5 (DEEPSLEEP_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0030,len:1344
load:0x40078000,len:13864
load:0x40080400,len:3608
entry 0x400805f0
ets Jul 29 2019 12:21:4`

Are you sure that code works on the "old" 6COLOR boards?
Because of this error I could also not test what you suggested to find out which touchpad has been pressed (via display.getINT())

[KarloLeksic]

Hi @bernji,

It works perfectly for me. Can you please send me a photo of the Inkplate from the back side to check something?

These messages aren't errors, it is a messages from ESP when it wakes up, restarts, etc.

There were problems with the touchpads because they remained charged, and since they are calibrated at the beginning, then it turns out that they are constantly pressed.

[bernji]

Mhh strage. Yes, it seems that the board "thinks" that the touchpads are constantly pressed...
BUT I would expect that display.getINT() returns some touchpad being pressed but it is always "00".
I call it before dispay,begin() and before I call Wire.begin().

Picture attached

[KarloLeksic]

In order to read the interrupt register (display.getINT()), it must occur. PCAL (gpio expander) catches an interrupt on change, and if the touchpads are "constantly pressed", then there is no change.

Can you please measure the voltage on the jumpers for touchpads?

If you read logic one constantly, that's the problem. I'll explain how you need to discharge the charge from the touchpads.