Update README.md

Author: rsoric

README.md

@@ -30,19 +30,16 @@ In order to get a head start with Inkplate (any), follow these steps:
 3. Install Inkplate Arduino library - Install the library from the Arduino Library Manager (just type "Inkplate" and click "Install") or install it with this repo. If you don't know how, check our [tutorial](https://soldered.com/learn/arduino-library/#Kako%20instaliraty%20library?).
 4. You are ready to get started! Select Tools -> Board -> Inkplate Boards and then pick correct one, as well as correct COM port and upload!
 
-### Code examples
+### Code examples & LVGL Documentation
 
-As this is currently a work in progress, only a small amount of examples are present, but more are coming very soon!
+As this is currently a work in progress, all examples except the 'project' Inkplate examples have been ported! The projects are coming soon.
+
+To see the entire LVGL documentation, please check out the [official LVGL documentation](https://docs.lvgl.io/master/).
 
 ### Documentation
 
 Find Inkplate documentation [here](https://soldered.com/documentation/inkplate/). 
 
-### Soldered Image Converter
-
-In order to display an Image on Inkplate, you can use the Soldered Image Converter to convert from .png, .jpg, .bmp to .h files which can be easily added to your project. Download the latest release [here](https://github.com/SolderedElectronics/Soldered-Image-Converter/releases).
-
-
 ### Battery power
 
 Inkplate boards has two options for powering it. First one is obvious - USB port at side of the board. Just plug any micro USB cable and you are good to go. Second option is battery. Supported batteries are standard Li-Ion/Li-Poly batteries with 3.7V nominal voltage. Connector for the battery is standard 2.00mm pitch JST connector (except on Inkplate 2, it uses SMD solder pads for battery terminals). The onboard charger will charge the battery with 500mA when USB is plugged at the same time. You can use battery of any size or capacity if you don't have a enclosure. If you are using our enclosure, battery size shouldn't exceed 90mm x 40mm (3.5 x 1.57 inch) and 5mm (0.19 inch) in height (excluding Inkplate 2, it uses [this battery](https://soldered.com/product/li-ion-baterija-600mah-3-7v/). [This battery](https://soldered.com/product/li-ion-battery-1200mah-3-7v/) is good fit for the Inkplate. Also, Inkplate's hardware is specially optimized for low power consumption in deep sleep mode, making it extremely suitable for battery applications.
@@ -53,22 +50,6 @@ Please check the polarity on the battery JST connector! Some batteries that can
 #### ℹ NOTE
 CR2032 battery is only for RTC backup. Inkplate cannot be powered with it.
 
-### Linux?
-
-Running Linux? You'll need to run few other lines from your Terminal:
-
-```
-apt install python3-pip
-pip3 install pyserial
-apt install python-is-python3
-```
-
-In case you're getting an [error](https://github.com/SolderedElectronics/Inkplate-Arduino-library/issues/212) while trying to install pyserial, run the following command:
-
-```
-apt install python3-serial
-```
-
 ### Open-source
 
 All of Inkplate-related development is open-sourced: