homebridge hangs at startup

[peshay]

Hi, I hope I'm right here, because homebridge hangs at startup since there is a new z-way device. Aeotec Multisensor 6 and homebridge stop starting right after homebridge-zway has added one of these new sensors:
[11/30/2016, 5:38:58 PM] Initializing platform accessory 'Presence'... [11/30/2016, 5:38:58 PM] Initializing platform accessory 'Vacation'... [11/30/2016, 5:38:58 PM] Initializing platform accessory 'Night'... [11/30/2016, 5:38:58 PM] Initializing platform accessory 'Security Zones Intrusion'... [11/30/2016, 5:38:58 PM] Initializing platform accessory 'Humidity'... [11/30/2016, 5:38:58 PM] Initializing platform accessory 'Heizung Wohnzimmer'... [11/30/2016, 5:38:58 PM] Initializing platform accessory 'Heizung Arbeitszimmer'... [11/30/2016, 5:38:58 PM] Initializing platform accessory 'Heizung WC'... [11/30/2016, 5:38:58 PM] Initializing platform accessory 'Boiler Schalter'... [11/30/2016, 5:38:58 PM] Initializing platform accessory 'Heizung Bad'... [11/30/2016, 5:38:58 PM] Initializing platform accessory 'Heizung Schlazimmer'... [11/30/2016, 5:38:58 PM] Initializing platform accessory 'Fibaro Dimmer (34.0)'... [11/30/2016, 5:38:58 PM] Initializing platform accessory 'Fibaro Dimmer (34.1)'... [11/30/2016, 5:38:58 PM] Initializing platform accessory 'Fibaro Dimmer (34.2)'... [11/30/2016, 5:38:58 PM] Initializing platform accessory 'Fibaro Dimmer (35.0)'... [11/30/2016, 5:38:58 PM] Initializing platform accessory 'Fibaro Dimmer (35.1)'... [11/30/2016, 5:38:58 PM] Initializing platform accessory 'Fibaro Dimmer (35.2)'... [11/30/2016, 5:38:58 PM] Initializing platform accessory 'Fibaro Dimmer (35.3)'... [11/30/2016, 5:38:58 PM] Initializing platform accessory 'Fibaro Dimmer (35.4)'... [11/30/2016, 5:38:58 PM] Initializing platform accessory 'Fibaro Dimmer (35.5)'... [11/30/2016, 5:38:58 PM] Initializing platform accessory 'Bewegung Schlafzimmer'...
I can not attach accessories as homebridge does not fully start for this but I attach the homebridge devices.
devices.json.txt

[SphtKr]

Hey @peshay sorry for the delayed response.

I don't immediately see the problem looking at your devices.json. This is almost certainly some kind of bug though. Can you confirm you're running the latest version (0.5.0-rc0)? And what I would suggest is (if you haven't already done this by now) to try adding a Homebridge.Skip tag to each sub-device from the Multisensor and see if you can get it to finish starting with just one or two of them disabled. It's probably a problem with a single virtual device, so if we can isolate which one that will help and will get you running again.

[peshay]

Hi thanks for the answer, I did some more research, so forgot my other posts, which I already deleted. ;)
I have 3 Aeotec Multisensor 6
In the attached devices.json.txt these are
ZWayVDev_zway_36-0-48
ZWayVDev_zway_37-0-48
ZWayVDev_zway_38-0-48
The one causing trouble is ZWayVDev_zway_38-0-48-1
I did Force Interview on all of them and set them all to default settings. All are USB powered.
But only with the last one, homebridge hangs.
The others are also shown as Window Contacts in Homekit, but if I use Homebridge.Service.Type:MotionSensor homebridge hangs on the other Sensors as well.

[SphtKr]

I seem to have lost track of this one or thought it was one of the half-dozen that were related to #69, but looking again I don't think so. That said, when I put your devices JSON through my test harness, I don't get any issues (inconclusive, but slightly surprising), so can you confirm if you're having the same issue when you upgrade to 0.5.0-rc1?

[mathiasnagler]

For me, homebridge hangs on startup if there are multiple devices that have the same name in Z-Way.
I have multiple dimmers, all named "Dimmer" because they are in different rooms.
If I rename the dimmers, everything starts to behave as expected again.

Can you reproduce that issue?

[mathiasnagler]

@peshay Your issue may be solved by #120
Any chance that you can try if this solves your problem?

@SphtKr Any change that #120 will be merged soon?