diff --git a/.DS_Store b/.DS_Store deleted file mode 100644 index 308694a..0000000 Binary files a/.DS_Store and /dev/null differ diff --git a/.gitignore b/.gitignore index 4744446..3dedc49 100644 --- a/.gitignore +++ b/.gitignore @@ -5,4 +5,5 @@ *.out *.pdf *.toc -*.gz \ No newline at end of file +*.gz +.DS_Store diff --git a/README.md b/README.md index e9d8e8d..ad38a07 100755 --- a/README.md +++ b/README.md @@ -1 +1,15 @@ -Firefox Add-on for Metamorphic JavaScript Malware Detection \ No newline at end of file +

SJSU Thesis Template

+ +I am not the original author of this template. It is modified from a template created by the University of Rhode Island (URI). A link to their original template is: http://egr.uri.edu/ele/thesisguide/step2/ + +I am not even the original author of the SJSU version of the template. I got it from Dr. Thomas Austin (https://github.com/taustin). When I used the original template as is, it was rejected by San Jose State's GUP department for no compliance with the thesis guidelines. I modified the template to conform with the rules as of December 2016. You should refer to their latest guidelines (http://www.sjsu.edu/gup/gradstudies/thesis/) as their requirements are updated regularly. + +As part of my thesis, I switched to BibTex. The requirements needed to use BibTex are below. These should be done after the thesis is successfully built. + +1. Rather than building with standard BibTex, use the file "uribibtex.bat" that is bundled with this repository. If you are using a Tex editor (which I highly recommend), you should have it point to this file instead of the standard BibTex executible. + +2. To rebuild the references file used by the tool in #1, you should double click on the file "genbib.bat" in the "build" subdirectory. + +The example steps for BibTex were debugged on a Mac. Given the "*.bat" files, the approach above probably will not work out of the box on a Mac. Here is a link with more general information on using BibTex. + +I am also including a Texmaker session so you can load it into Texmaker directly. You need to modify the session file to match the local path on your machine. If you can get TexStudio working instead, it is a better tool in my humble opinion. diff --git a/Texmaker_Session.tks b/Texmaker_Session.tks new file mode 100644 index 0000000..f76cce4 --- /dev/null +++ b/Texmaker_Session.tks @@ -0,0 +1,12 @@ + + + + + + + + + + + + diff --git a/abs.tex b/abs.tex index a697cb2..3319125 100755 --- a/abs.tex +++ b/abs.tex @@ -1,7 +1,4 @@ -Internet has evolved into the greatest medium of communication and data exchange that the world has ever known. Since the late 1990s, it has become a vast interconnected source of information and services widely used for commercial and personal purposes. This evolution has led to the emergence of social networking, online banking and advertising, among various other commercial and non-commercial uses. Transactions over the Internet often involve the transfer of sensitive data which attackers like to tap and exploit. For example, bank account information, medical records and passwords are routinely transferred over the network. Unfortunately, user's personal computer is a weak link in this system where personal computers typically run a large number of applications, which are rarely managed in a proper way. Single visit to a compromised web page is sufficient to infect a web browser. When a user visits such a compromised website, malicious JavaScript programs are automatically loaded with HTML code in the web browser. Execution of such malicious JavaScript can expose the personal data of the user. +This paper is very abstract. -Malware is a software program designed to do malicious activities on victim's computer with the intention of extracting information and exploiting resources without his consent. Researchers developed techniques for malware detection like signature detection. To overcome the malware detection techniques, malware writers came up with different types of Malwares among which Metamorphic Malware is an advanced version. In this malware, internal structure of the malware gets changed after every execution but the overall functionality remains the same. Transcriptase is a metamorphic malware implemented in JavaScript. Execution of this script infects all the JavaScript files in the folder where the malware script is placed. As a result of this infection, a morphed version of the malware script gets attached to benign JavaScript files in the folder. Whenever this infected JavaScript gets executed in any other folder, it infects other benign JavaScript files. For each infection, malware script generates a new morphed version. +{\bf Keywords:} Apples, Bananas, Cherries -The purpose of my research is to develop a Firefox browser plugin for Metamorphic JavaScript malware detection. As JavaScript malware executes in a browser, before the page gets loaded Rhino can be used to generate an opcode sequence for the JavaScript content embedded in the webpage and then the Firefox plugin will verify the generated JavaScript's opcode sequence. If JavaScript is found to be malicious, then the plugin will restrict page load. This will provide dynamic protection from malware infecting through browser. I will be using Transcriptase. - -Even though, internal code of the malware gets changed after every execution, same instructions (i.e., responsible for malware functionality) have to be used somewhere in code. So several detection techniques that work on the statistical distribution of instructions to detect the malware have been developed. Some of those techniques are Hidden Markov Model, Opcode Graph Similarity and Simple Substitution Distance detection technique. One detection technique will be chosen among these techniques based on the “accuracy" and “on the fly performance", which will be implemented in Firefox plugin. \ No newline at end of file diff --git a/ack.tex b/ack.tex index bfd1334..8b3a746 100755 --- a/ack.tex +++ b/ack.tex @@ -1 +1,2 @@ -I am very thankful to my advisor Dr. Thomas Austin for his continuous guidance and support throughout this project and believing me. Also, I would like to thank the committee members Dr. Chris Pollett and Fabio Di Troia for monitoring the progress of the project and their valuable time. \ No newline at end of file +I want to thank me, myself, and I. + diff --git a/bib.tex b/bib.tex deleted file mode 100755 index c28b8bd..0000000 --- a/bib.tex +++ /dev/null @@ -1,52 +0,0 @@ -% -% Be sure to use the \url macro for URLs -% -% Also, all references in your report must be cited at least once -% -% References are alphabetized by last name of first author (or first word of title if there is no author) -% -\begin{thebibliography}{10} - -\bibitem{harden} A `murder code' broken, {\it San Francisco Chronicle}, August~9, 1969,\\ -\url{http://www.flickr.com/photos/seanutbutter/2462841231/} - -\bibitem{bib1} Announcing the Advanced Encryption Standard (AES), NIST, -FIPS~197, November~26, 2001,\\ -\url{http://csrc.nist.gov/publications/fips/fips197/fips-197.pdf} - -% If there is a published paper, use that instead of a masters report. In this case -% we use the masters report, since there was no paper published. -\bibitem{basa} P.~K.~Basavaraju, Heuristic-search cryptanalysis of the Zodiac~340 cipher, -Master's report, Department of Computer Science, San Jose State University, 2009,\\ -\url{http://scholarworks.sjsu.edu/etd_projects/56/} - -\bibitem{bib3} K.~Briggs, English and Latin digram and trigram frequencies,\\ -\url{http://keithbriggs.info/documents/english_latin.pdf} - -\bibitem{bib2} G.~Claston, 340-cipher --- overview and examination,\\ -\url{http://www.zodiackiller.com/mba/zc/69.html} - -\bibitem{glurk} Glurk, The final~18 symbols are nothing but filler!,\\ -\url{http://www.zodiackillerfacts.com/forum/viewtopic.php?f=49&t=423} - -\bibitem{bib7} T.~Jakobsen, A fast method for the cryptanalysis of substitution ciphers, -{\it Cryptologia}, 19:265--274, 1995 - -% This is the format to use for a book. Note that the book title is italicized. -\bibitem{bib10} D.~Kreher and D.~Stinson, {\it Combinatorial Algorithms: -Generation, Enumeration and Search}, CRC~Press, 1998 - -% This is the format for a journal article. Note that "9(3):159--170" refers to volume 9, number (or issue) 3, -% and the page numbers. The double dash, "--", is used for a range of numbers. Also, the journal -% title is italicized, but not the article title. -\bibitem{bib11} G.~Shanmugam, R.~M.~Low, and M.~Stamp, -Simple substitution distance and metamorphic detection, -{\it Journal of Computer Virology and Hacking Techniques}, 9(3):159--170, 2013 - -\bibitem{bibAC} M.~Stamp and R.~M.~Low, {\it Applied Cryptanalysis: Breaking Ciphers -in the Real World}, Wiley, 2006 - -\bibitem{bib17} M.~Stamp, {\it Information Security: Principles and Practice}, second edition, -Wiley, 2011 - -\end{thebibliography} diff --git a/build/genbib.bat b/build/genbib.bat new file mode 100644 index 0000000..3ee5203 --- /dev/null +++ b/build/genbib.bat @@ -0,0 +1 @@ + bibtex thesis diff --git a/build/uribib.bst b/build/uribib.bst new file mode 100644 index 0000000..ebbcaf5 --- /dev/null +++ b/build/uribib.bst @@ -0,0 +1,2586 @@ +%% +%% uribib.bst +%% Version 1.2 (2006/06/19) +%% Created from IEEEtranS.bst by Timothy Toolan +%% +%% Used to create the alphabetically sorted bibliography for theses +%% and dissertations at the University of Rhode Island. +%% +%% This is used by urithesis.cls, and should be used with uriref.bst to +%% create the references list, which is sorted in order of citation. +%% +%%********************************************************************** +%% +%% ChangeLog for uribib.bst: +%% +%% 1.0 (2004/10/28) +%% 1. Initial release based on IEEEtranS.bst. +%% 2. Changed \begin{thebibliography} and \end{thebibliography} to +%% \begin{thesisbib} and \end{thesisbib} to avoid conflict +%% with the list of references generated by uriref.bst. +%% 3. Converted numbered \bibitem entries to unnumbered \item entries. +%% 4. Changed format of author names to be last name, first initial. +%% +%% 1.1 (2005/07/12) +%% 1. Turned off the "dashification" of repeated (i.e., identical to +%% those of the previous entry) names. +%% +%% 1.2 (2006/06/19) +%% 1. Moved the \addcontentsline{toc} into the created .bbl file, +%% which is necessary to ensure correct page numbers. +%% +%%********************************************************************** +%% +%% IEEEtranS.bst +%% BibTeX Bibliography Style file +%% Sorting version of IEEEtran.bst +%% *** Not for use with work to be submitted to the IEEE *** +%% Version 1.11 (2003/04/02) +%% +%% Copyright (c) 2003 Michael Shell +%% +%% Original starting code base and algorithms obtained from the output of +%% Patrick W. Daly's makebst package as well as from prior versions of +%% IEEE BibTeX styles: +%% +%% 1. Howard Trickey and Oren Patashnik's ieeetr.bst (1985/1988) +%% 2. Silvano Balemi and Richard H. Roy's IEEEbib.bst (1993) +%% +%% Added sorting code is from plain.bst. +%% +%% See: +%% http://www.ctan.org/tex-archive/macros/latex/contrib/supported/IEEEtran/ +%% for latest version and current contact information. +%% +%% For use with BibTeX version 0.99a or later +%% +%% This is a numerical citation style. +%% +%%********************************************************************** +%% Legal Notice: +%% This code is offered as-is without any warranty either expressed or +%% implied; without even the implied warranty of MERCHANTABILITY or +%% FITNESS FOR A PARTICULAR PURPOSE! +%% User assumes all risk. +%% In no event shall IEEE or any contributor to this code be liable for +%% any damages or losses, including, but not limited to, incidental, +%% consequential, or any other damages, resulting from the use or misuse +%% of any information contained here. +%% +%% This code is distributed under the Perl Artistic License +%% ( http://language.perl.com/misc/Artistic.html ) +%% and may be freely used, distributed and modified - subject to the +%% constraints therein. +%% Retain all contribution notices, credits and disclaimers. +%% +%% All comments are the opinions of their respective authors and are not +%% necessarily endorsed by the IEEE. +%%********************************************************************** +% +% +% Changelog: +% +% 1.10 (2002/09/27) Initial release +% +% 1.11 (2003/04/02) +% 1. Fixed bug with URLs containing underscores when using url.sty. Thanks +% to Ming Kin Lai for reporting this. + + + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% DEFAULTS FOR THE CONTROLS OF THE BST STYLE %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +% These are the defaults for the user adjustable controls. The values used +% here can be overridden by the user via IEEEtranBSTCTL entry type. + +% NOTE: The recommended LaTeX command to invoke a control entry type is: +% +%\makeatletter +%\def\bstctlcite#1{\@bsphack +% \@for\@citeb:=#1\do{% +% \edef\@citeb{\expandafter\@firstofone\@citeb}% +% \if@filesw\immediate\write\@auxout{\string\citation{\@citeb}}\fi}% +% \@esphack} +%\makeatother +% +% It is called at the start of the document, before the first \cite, like: +% \bstctlcite{IEEEexample:BSTcontrol} +% +% IEEEtran.cls V1.6 and later does provide this command. + + + +% #0 turns off the display of the number for articles. +% #1 enables +FUNCTION {default.is.use.number.for.article} { #1 } + + +% #0 turns off the display of the paper and type fields in @inproceedings. +% #1 enables +FUNCTION {default.is.use.paper} { #1 } + + +% #0 turns off the forced use of "et al." +% #1 enables +FUNCTION {default.is.forced.et.al} { #0 } + +% The maximum number of names that can be present beyond which an "et al." +% usage is forced. Be sure that num.names.shown.with.forced.et.al (below) +% is not greater than this value! +% Note: There are many instances of references in IEEE journals which have +% a very large number of authors as well as instances in which "et al." is +% used profusely. +FUNCTION {default.max.num.names.before.forced.et.al} { #10 } + +% The number of names that will be shown with a forced "et al.". +% Must be less than or equal to max.num.names.before.forced.et.al +FUNCTION {default.num.names.shown.with.forced.et.al} { #1 } + + +% #0 turns off the alternate interword spacing for entries with URLs. +% #1 enables +FUNCTION {default.is.use.alt.interword.spacing} { #1 } + +% If alternate interword spacing for entries with URLs is enabled, this is +% the interword spacing stretch factor that will be used. For example, the +% default "4" here means that the interword spacing in entries with URLs can +% stretch to four times normal. Does not have to be an integer. Note that +% the value specified here can be overridden by the user in their LaTeX +% code via a command such as: +% "\providecommand\BIBentryALTinterwordstretchfactor{1.5}" in addition to +% that via the IEEEtranBSTCTL entry type. +FUNCTION {default.ALTinterwordstretchfactor} { "4" } + + +% #0 turns off the "dashification" of repeated (i.e., identical to those +% of the previous entry) names. IEEE normally does this. +% #1 enables +FUNCTION {default.is.dash.repeated.names} { #0 } + + +% The default name format control string. +FUNCTION {default.name.format.string}{ "{vv~}{ll}{, jj}{, f.}" } + + +% The default LaTeX font command for the names. +FUNCTION {default.name.latex.cmd}{ "" } + + +% Other controls that cannot be accessed via IEEEtranBSTCTL entry type. + +% #0 turns off the terminal startup banner/completed message so as to +% operate more quietly. +% #1 enables +FUNCTION {is.print.banners.to.terminal} { #1 } + + + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% FILE VERSION AND BANNER %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +FUNCTION{bst.file.version} { "1.1" } +FUNCTION{bst.file.date} { "2005/07/12" } +FUNCTION{bst.file.website} { "http://www.ele.uri.edu/info/thesis/uritex/uribib.bst" } + +FUNCTION {banner.message} +{ is.print.banners.to.terminal + { " " + top$ + "-- University of Rhode Island bibliography, version" " " * bst.file.version * + " (" * bst.file.date * ")" * "," * + top$ + "-- based on IEEEtranS.bst version 1.11 (2003/04/02) by Michael Shell." + top$ + "-- " bst.file.website * + top$ + "-- See the manual " quote$ * "IEEEtran_bst_HOWTO.pdf" * quote$ * " for usage information," * + top$ + "-- available at http://www.ele.uri.edu/info/thesis/IEEEtran_bst_HOWTO.pdf" + top$ + } + { skip$ } + if$ +} + +FUNCTION {completed.message} +{ is.print.banners.to.terminal + { "" + top$ + "Done." + top$ + } + { skip$ } + if$ +} + + + + +%%%%%%%%%%%%%%%%%%%%%% +%% STRING CONSTANTS %% +%%%%%%%%%%%%%%%%%%%%%% + +FUNCTION {bbl.and}{ "and" } +FUNCTION {bbl.etal}{ "et~al." } +FUNCTION {bbl.editors}{ "eds." } +FUNCTION {bbl.editor}{ "ed." } +FUNCTION {bbl.edition}{ "ed." } +FUNCTION {bbl.volume}{ "vol." } +FUNCTION {bbl.of}{ "of" } +FUNCTION {bbl.number}{ "no." } +FUNCTION {bbl.in}{ "in" } +FUNCTION {bbl.pages}{ "pp." } +FUNCTION {bbl.page}{ "p." } +FUNCTION {bbl.chapter}{ "ch." } +FUNCTION {bbl.paper}{ "paper" } +FUNCTION {bbl.part}{ "pt." } +FUNCTION {bbl.patent}{ "Patent" } +FUNCTION {bbl.patentUS}{ "U.S." } +FUNCTION {bbl.revision}{ "Rev." } +FUNCTION {bbl.series}{ "ser." } +FUNCTION {bbl.standard}{ "Std." } +FUNCTION {bbl.techrep}{ "Tech. Rep." } +FUNCTION {bbl.mthesis}{ "Master's thesis" } +FUNCTION {bbl.phdthesis}{ "Ph.D. dissertation" } +FUNCTION {bbl.urlprefix}{ "[Online]. Available:" } +FUNCTION {bbl.st}{ "st" } +FUNCTION {bbl.nd}{ "nd" } +FUNCTION {bbl.rd}{ "rd" } +FUNCTION {bbl.th}{ "th" } + + +% This is the LaTeX spacer that is used when a larger than normal space +% is called for (such as just before the address:publisher). +FUNCTION {large.space} { "\hskip 1em plus 0.5em minus 0.4em\relax " } + +% The LaTeX code for dashes that are used to represent repeated names. +% Note: Some older IEEE journals used something like +% "\rule{0.275in}{0.5pt}\," which is fairly thick and runs right along +% the baseline. However, IEEE now uses a thinner, above baseline, +% six dash long sequence. +FUNCTION {repeated.name.dashes} { "------" } + + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% PREDEFINED STRING MACROS %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +MACRO {jan} {"Jan."} +MACRO {feb} {"Feb."} +MACRO {mar} {"Mar."} +MACRO {apr} {"Apr."} +MACRO {may} {"May"} +MACRO {jun} {"June"} +MACRO {jul} {"July"} +MACRO {aug} {"Aug."} +MACRO {sep} {"Sept."} +MACRO {oct} {"Oct."} +MACRO {nov} {"Nov."} +MACRO {dec} {"Dec."} + + + +%%%%%%%%%%%%%%%%%% +%% ENTRY FIELDS %% +%%%%%%%%%%%%%%%%%% + +ENTRY + { address + assignee + author + booktitle + chapter + day + dayfiled + edition + editor + howpublished + institution + intype + journal + key + language + month + monthfiled + nationality + note + number + organization + pages + paper + publisher + school + series + revision + title + type + url + volume + year + yearfiled + CTLuse_article_number + CTLuse_paper + CTLuse_forced_etal + CTLmax_names_forced_etal + CTLnames_show_etal + CTLuse_alt_spacing + CTLalt_stretch_factor + CTLdash_repeated_names + CTLname_format_string + CTLname_latex_cmd + } + {} + { label } + + + + +%%%%%%%%%%%%%%%%%%%%%%% +%% INTEGER VARIABLES %% +%%%%%%%%%%%%%%%%%%%%%%% + +INTEGERS { prev.status.punct this.status.punct punct.std + punct.no punct.comma punct.period + prev.status.space this.status.space space.std + space.no space.normal space.large + prev.status.quote this.status.quote quote.std + quote.no quote.close + prev.status.nline this.status.nline nline.std + nline.no nline.newblock + status.cap cap.std + cap.no cap.yes} + +INTEGERS { longest.label.width multiresult nameptr namesleft number.label numnames } + +INTEGERS { is.use.number.for.article + is.use.paper + is.forced.et.al + max.num.names.before.forced.et.al + num.names.shown.with.forced.et.al + is.use.alt.interword.spacing + is.dash.repeated.names} + + +%%%%%%%%%%%%%%%%%%%%%% +%% STRING VARIABLES %% +%%%%%%%%%%%%%%%%%%%%%% + +STRINGS { bibinfo + longest.label + oldname + s + t + ALTinterwordstretchfactor + name.format.string + name.latex.cmd} + + + + +%%%%%%%%%%%%%%%%%%%%%%%%% +%% LOW LEVEL FUNCTIONS %% +%%%%%%%%%%%%%%%%%%%%%%%%% + +FUNCTION {initialize.controls} +{ default.is.use.number.for.article 'is.use.number.for.article := + default.is.use.paper 'is.use.paper := + default.is.forced.et.al 'is.forced.et.al := + default.max.num.names.before.forced.et.al 'max.num.names.before.forced.et.al := + default.num.names.shown.with.forced.et.al 'num.names.shown.with.forced.et.al := + default.is.use.alt.interword.spacing 'is.use.alt.interword.spacing := + default.is.dash.repeated.names 'is.dash.repeated.names := + default.ALTinterwordstretchfactor 'ALTinterwordstretchfactor := + default.name.format.string 'name.format.string := + default.name.latex.cmd 'name.latex.cmd := +} + + +% This IEEEtran.bst features a very powerful and flexible mechanism for +% controlling the capitalization, punctuation, spacing, quotation, and +% newlines of the formatted entry fields. (Note: IEEEtran.bst does not need +% or use the newline/newblock feature, but it has been implemented for +% possible future use.) The output states of IEEEtran.bst consist of +% multiple independent attributes and, as such, can be thought of as being +% vectors, rather than the simple scalar values ("before.all", +% "mid.sentence", etc.) used in most other .bst files. +% +% The more flexible and complex design used here was motivated in part by +% IEEE's rather unusual bibliography style. For example, IEEE ends the +% previous field item with a period and large space prior to the publisher +% address; the @electronic entry types use periods as inter-item punctuation +% rather than the commas used by the other entry types; and URLs are never +% followed by periods even though they are the last item in the entry. +% Although it is possible to accommodate these features with the conventional +% output state system, the seemingly endless exceptions make for convoluted, +% unreliable and difficult to maintain code. +% +% IEEEtran.bst's output state system can be easily understood via a simple +% illustration of two most recently formatted entry fields (on the stack): +% +% CURRENT_ITEM +% "PREVIOUS_ITEM +% +% which, in this example, is to eventually appear in the bibliography as: +% +% "PREVIOUS_ITEM," CURRENT_ITEM +% +% It is the job of the output routine to take the previous item off of the +% stack (while leaving the current item at the top of the stack), apply its +% trailing punctuation (including closing quote marks) and spacing, and then +% to write the result to BibTeX's output buffer: +% +% "PREVIOUS_ITEM," +% +% Punctuation (and spacing) between items is often determined by both of the +% items rather than just the first one. The presence of quotation marks +% further complicates the situation because, in standard English, trailing +% punctuation marks are supposed to be contained within the quotes. +% +% IEEEtran.bst maintains two output state (aka "status") vectors which +% correspond to the previous and current (aka "this") items. Each vector +% consists of several independent attributes which track punctuation, +% spacing, quotation, and newlines. Capitalization status is handled by a +% separate scalar because the format routines, not the output routine, +% handle capitalization and, therefore, there is no need to maintain the +% capitalization attribute for both the "previous" and "this" items. +% +% When a format routine adds a new item, it copies the current output status +% vector to the previous output status vector and (usually) resets the +% current (this) output status vector to a "standard status" vector. Using a +% "standard status" vector in this way allows us to redefine what we mean by +% "standard status" at the start of each entry handler and reuse the same +% format routines under the various inter-item separation schemes. For +% example, the standard status vector for the @book entry type may use +% commas for item separators, while the @electronic type may use periods, +% yet both entry handlers exploit many of the exact same format routines. +% +% Because format routines have write access to the output status vector of +% the previous item, they can override the punctuation choices of the +% previous format routine! Therefore, it becomes trivial to implement rules +% such as "Always use a period and a large space before the publisher." By +% pushing the generation of the closing quote mark to the output routine, we +% avoid all the problems caused by having to close a quote before having all +% the information required to determine what the punctuation should be. +% +% The IEEEtran.bst output state system can easily be expanded if needed. +% For instance, it is easy to add a "space.tie" attribute value if the +% bibliography rules mandate that two items have to be joined with an +% unbreakable space. + +FUNCTION {initialize.status.constants} +{ #0 'punct.no := + #1 'punct.comma := + #2 'punct.period := + #0 'space.no := + #1 'space.normal := + #2 'space.large := + #0 'quote.no := + #1 'quote.close := + #0 'cap.no := + #1 'cap.yes := + #0 'nline.no := + #1 'nline.newblock := +} + +FUNCTION {std.status.using.comma} +{ punct.comma 'punct.std := + space.normal 'space.std := + quote.no 'quote.std := + nline.no 'nline.std := + cap.no 'cap.std := +} + +FUNCTION {std.status.using.period} +{ punct.period 'punct.std := + space.normal 'space.std := + quote.no 'quote.std := + nline.no 'nline.std := + cap.yes 'cap.std := +} + +FUNCTION {initialize.prev.this.status} +{ punct.no 'prev.status.punct := + space.no 'prev.status.space := + quote.no 'prev.status.quote := + nline.no 'prev.status.nline := + punct.no 'this.status.punct := + space.no 'this.status.space := + quote.no 'this.status.quote := + nline.no 'this.status.nline := + cap.yes 'status.cap := +} + +FUNCTION {this.status.std} +{ punct.std 'this.status.punct := + space.std 'this.status.space := + quote.std 'this.status.quote := + nline.std 'this.status.nline := +} + +FUNCTION {cap.status.std}{ cap.std 'status.cap := } + +FUNCTION {this.to.prev.status} +{ this.status.punct 'prev.status.punct := + this.status.space 'prev.status.space := + this.status.quote 'prev.status.quote := + this.status.nline 'prev.status.nline := +} + + +FUNCTION {not} +{ { #0 } + { #1 } + if$ +} + +FUNCTION {and} +{ { skip$ } + { pop$ #0 } + if$ +} + +FUNCTION {or} +{ { pop$ #1 } + { skip$ } + if$ +} + + +% convert the strings "yes" or "no" to #1 or #0 respectively +FUNCTION {yes.no.to.int} +{ "l" change.case$ duplicate$ + "yes" = + { pop$ #1 } + { duplicate$ "no" = + { pop$ #0 } + { "unknown boolean " quote$ * swap$ * quote$ * + " in " * cite$ * warning$ + #0 + } + if$ + } + if$ +} + + +% pushes true if the single char string on the stack is in the +% range of "0" to "9" +FUNCTION {is.num} +{ chr.to.int$ + duplicate$ "0" chr.to.int$ < not + swap$ "9" chr.to.int$ > not and +} + +% multiplies the integer on the stack by a factor of 10 +FUNCTION {bump.int.mag} +{ #0 'multiresult := + { duplicate$ #0 > } + { #1 - + multiresult #10 + + 'multiresult := + } + while$ +pop$ +multiresult +} + +% converts a single character string on the stack to an integer +FUNCTION {char.to.integer} +{ duplicate$ + is.num + { chr.to.int$ "0" chr.to.int$ - } + {"noninteger character " quote$ * swap$ * quote$ * + " in integer field of " * cite$ * warning$ + #0 + } + if$ +} + +% converts a string on the stack to an integer +FUNCTION {string.to.integer} +{ duplicate$ text.length$ 'namesleft := + #1 'nameptr := + #0 'numnames := + { nameptr namesleft > not } + { duplicate$ nameptr #1 substring$ + char.to.integer numnames bump.int.mag + + 'numnames := + nameptr #1 + + 'nameptr := + } + while$ +pop$ +numnames +} + + + + +% The output routines write out the *next* to the top (previous) item on the +% stack, adding punctuation and such as needed. Since IEEEtran.bst maintains +% the output status for the top two items on the stack, these output +% routines have to consider the previous output status (which corresponds to +% the item that is being output). Full independent control of punctuation, +% closing quote marks, spacing, and newblock is provided. +% +% "output.nonnull" does not check for the presence of a previous empty +% item. +% +% "output" does check for the presence of a previous empty item and will +% remove an empty item rather than outputing it. +% +% "output.warn" is like "output", but will issue a warning if it detects +% an empty item. + +FUNCTION {output.nonnull} +{ swap$ + prev.status.punct punct.comma = + { "," * } + { skip$ } + if$ + prev.status.punct punct.period = + { add.period$ } + { skip$ } + if$ + prev.status.quote quote.close = + { "''" * } + { skip$ } + if$ + prev.status.space space.normal = + { " " * } + { skip$ } + if$ + prev.status.space space.large = + { large.space * } + { skip$ } + if$ + write$ + prev.status.nline nline.newblock = + { newline$ "\newblock " write$ } + { skip$ } + if$ +} + +FUNCTION {output} +{ duplicate$ empty$ + 'pop$ + 'output.nonnull + if$ +} + +FUNCTION {output.warn} +{ 't := + duplicate$ empty$ + { pop$ "empty " t * " in " * cite$ * warning$ } + 'output.nonnull + if$ +} + +% "fin.entry" is the output routine that handles the last item of the entry +% (which will be on the top of the stack when "fin.entry" is called). + +FUNCTION {fin.entry} +{ this.status.punct punct.no = + { skip$ } + { add.period$ } + if$ + this.status.quote quote.close = + { "''" * } + { skip$ } + if$ +write$ +newline$ +} + + +FUNCTION {is.last.char.not.punct} +{ duplicate$ + "}" * add.period$ + #-1 #1 substring$ "." = +} + +FUNCTION {is.multiple.pages} +{ 't := + #0 'multiresult := + { multiresult not + t empty$ not + and + } + { t #1 #1 substring$ + duplicate$ "-" = + swap$ duplicate$ "," = + swap$ "+" = + or or + { #1 'multiresult := } + { t #2 global.max$ substring$ 't := } + if$ + } + while$ + multiresult +} + +FUNCTION {capitalize}{ "u" change.case$ "t" change.case$ } + +FUNCTION {emphasize} +{ duplicate$ empty$ + { pop$ "" } + { "\emph{" swap$ * "}" * } + if$ +} + +FUNCTION {do.name.latex.cmd} +{ name.latex.cmd + empty$ + { skip$ } + { name.latex.cmd "{" * swap$ * "}" * } + if$ +} + +% IEEEtran.bst uses its own \BIBforeignlanguage command which directly +% invokes the TeX hyphenation patterns without the need of the Babel +% package. Babel does a lot more than switch hyphenation patterns and +% its loading can cause unintended effects in many class files (such as +% IEEEtran.cls). +FUNCTION {select.language} +{ duplicate$ empty$ 'pop$ + { language empty$ 'skip$ + { "\BIBforeignlanguage{" language * "}{" * swap$ * "}" * } + if$ + } + if$ +} + +FUNCTION {tie.or.space.prefix} +{ duplicate$ text.length$ #3 < + { "~" } + { " " } + if$ + swap$ +} + +FUNCTION {get.bbl.editor} +{ editor num.names$ #1 > 'bbl.editors 'bbl.editor if$ } + +FUNCTION {space.word}{ " " swap$ * " " * } + + +% Field Conditioners, Converters, Checkers and External Interfaces + +FUNCTION {empty.field.to.null.string} +{ duplicate$ empty$ + { pop$ "" } + { skip$ } + if$ +} + +FUNCTION {either.or.check} +{ empty$ + { pop$ } + { "can't use both " swap$ * " fields in " * cite$ * warning$ } + if$ +} + +FUNCTION {empty.entry.warn} +{ author empty$ title empty$ howpublished empty$ + month empty$ year empty$ note empty$ url empty$ + and and and and and and + { "all relevant fields are empty in " cite$ * warning$ } + 'skip$ + if$ +} + + +% The bibinfo system provides a way for the electronic parsing/acquisition +% of a bibliography's contents as is done by ReVTeX. For example, a field +% could be entered into the bibliography as: +% \bibinfo{volume}{2} +% Only the "2" would show up in the document, but the LaTeX \bibinfo command +% could do additional things with the information. IEEEtran.bst does provide +% a \bibinfo command via "\providecommand{\bibinfo}[2]{#2}". However, it is +% currently not used as the bogus bibinfo functions defined here output the +% entry values directly without the \bibinfo wrapper. The bibinfo functions +% themselves (and the calls to them) are retained for possible future use. +% +% bibinfo.check avoids acting on missing fields while bibinfo.warn will +% issue a warning message if a missing field is detected. Prior to calling +% the bibinfo functions, the user should push the field value and then its +% name string, in that order. + +FUNCTION {bibinfo.check} +{ swap$ duplicate$ missing$ + { pop$ pop$ "" } + { duplicate$ empty$ + { swap$ pop$ } + { swap$ pop$ } + if$ + } + if$ +} + +FUNCTION {bibinfo.warn} +{ swap$ duplicate$ missing$ + { swap$ "missing " swap$ * " in " * cite$ * warning$ pop$ "" } + { duplicate$ empty$ + { swap$ "empty " swap$ * " in " * cite$ * warning$ } + { swap$ pop$ } + if$ + } + if$ +} + + +% IEEE separates large numbers with more than 4 digits into groups of +% three. IEEE uses a small space to separate these number groups. +% Typical applications include patent and page numbers. + +% number of consecutive digits required to trigger the group separation. +FUNCTION {large.number.trigger}{ #5 } + +% For numbers longer than the trigger, this is the blocksize of the groups. +% The blocksize must be less than the trigger threshold, and 2 * blocksize +% must be greater than the trigger threshold (can't do more than one +% separation on the initial trigger). +FUNCTION {large.number.blocksize}{ #3 } + +% What is actually inserted between the number groups. +FUNCTION {large.number.separator}{ "\," } + +% So as to save on integer variables by reusing existing ones, numnames +% holds the current number of consecutive digits read and nameptr holds +% the number that will trigger an inserted space. +FUNCTION {large.number.separate} +{ 't := + "" + #0 'numnames := + large.number.trigger 'nameptr := + { t empty$ not } + { t #-1 #1 substring$ is.num + { numnames #1 + 'numnames := } + { #0 'numnames := + large.number.trigger 'nameptr := + } + if$ + t #-1 #1 substring$ swap$ * + t #-2 global.max$ substring$ 't := + numnames nameptr = + { duplicate$ #1 nameptr large.number.blocksize - substring$ swap$ + nameptr large.number.blocksize - #1 + global.max$ substring$ + large.number.separator swap$ * * + nameptr large.number.blocksize - 'numnames := + large.number.blocksize #1 + 'nameptr := + } + { skip$ } + if$ + } + while$ +} + +% Converts all single dashes "-" to double dashes "--". +FUNCTION {n.dashify} +{ large.number.separate + 't := + "" + { t empty$ not } + { t #1 #1 substring$ "-" = + { t #1 #2 substring$ "--" = not + { "--" * + t #2 global.max$ substring$ 't := + } + { { t #1 #1 substring$ "-" = } + { "-" * + t #2 global.max$ substring$ 't := + } + while$ + } + if$ + } + { t #1 #1 substring$ * + t #2 global.max$ substring$ 't := + } + if$ + } + while$ +} + + +% This function detects entries with names that are identical to that of +% the previous entry and replaces the repeated names with dashes (if the +% "is.dash.repeated.names" user control is nonzero). +FUNCTION {name.or.dash} +{ 's := + oldname empty$ + { s 'oldname := s } + { s oldname = + { is.dash.repeated.names + { repeated.name.dashes } + { s 'oldname := s } + if$ + } + { s 'oldname := s } + if$ + } + if$ +} + +% Converts the number string on the top of the stack to +% "numerical ordinal form" (e.g., "7" to "7th"). There is +% no artificial limit to the upper bound of the numbers as the +% least significant digit always determines the ordinal form. +FUNCTION {num.to.ordinal} +{ duplicate$ #-1 #1 substring$ "1" = + { bbl.st * } + { duplicate$ #-1 #1 substring$ "2" = + { bbl.nd * } + { duplicate$ #-1 #1 substring$ "3" = + { bbl.rd * } + { bbl.th * } + if$ + } + if$ + } + if$ +} + +% If the string on the top of the stack begins with a number, +% (e.g., 11th) then replace the string with the leading number +% it contains. Otherwise retain the string as-is. s holds the +% extracted number, t holds the part of the string that remains +% to be scanned. +FUNCTION {extract.num} +{ duplicate$ 't := + "" 's := + { t empty$ not } + { t #1 #1 substring$ + t #2 global.max$ substring$ 't := + duplicate$ is.num + { s swap$ * 's := } + { pop$ "" 't := } + if$ + } + while$ + s empty$ + 'skip$ + { pop$ s } + if$ +} + +% Converts the word number string on the top of the stack to +% Arabic string form. Will be successful up to "tenth". +FUNCTION {word.to.num} +{ duplicate$ "l" change.case$ 's := + s "first" = + { pop$ "1" } + { skip$ } + if$ + s "second" = + { pop$ "2" } + { skip$ } + if$ + s "third" = + { pop$ "3" } + { skip$ } + if$ + s "fourth" = + { pop$ "4" } + { skip$ } + if$ + s "fifth" = + { pop$ "5" } + { skip$ } + if$ + s "sixth" = + { pop$ "6" } + { skip$ } + if$ + s "seventh" = + { pop$ "7" } + { skip$ } + if$ + s "eighth" = + { pop$ "8" } + { skip$ } + if$ + s "ninth" = + { pop$ "9" } + { skip$ } + if$ + s "tenth" = + { pop$ "10" } + { skip$ } + if$ +} + + +% Converts the string on the top of the stack to numerical +% ordinal (e.g., "11th") form. +FUNCTION {convert.edition} +{ duplicate$ empty$ 'skip$ + { duplicate$ #1 #1 substring$ is.num + { extract.num + num.to.ordinal + } + { word.to.num + duplicate$ #1 #1 substring$ is.num + { num.to.ordinal } + { "edition ordinal word " quote$ * edition * quote$ * + " may be too high (or improper) for conversion" * " in " * cite$ * warning$ + } + if$ + } + if$ + } + if$ +} + + + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% LATEX BIBLIOGRAPHY CODE %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +FUNCTION {start.entry} +{ newline$ + "\item[]" write$ + newline$ + "" + initialize.prev.this.status +} + +% Here we write out all the LaTeX code that we will need. The most involved +% code sequences are those that control the alternate interword spacing and +% foreign language hyphenation patterns. The heavy use of \providecommand +% gives users a way to override the defaults. Special thanks to Javier Bezos, +% Johannes Braams, Robin Fairburns, Heiko Oberdiek, Donald Arseneau and all +% the other gurus on comp.text.tex for their help and advice on the topic of +% \selectlanguage, Babel and BibTeX. +FUNCTION {begin.bib} +{ preamble$ empty$ 'skip$ + { preamble$ write$ newline$ } + if$ + "\begin{thesisbib}{" longest.label * "}" * + write$ newline$ + "\providecommand{\url}[1]{#1}" + write$ newline$ + "\addcontentsline{toc}{chapterx}{\biblioname}" + write$ newline$ + "\csname url@rmstyle\endcsname" + write$ newline$ + "\providecommand{\newblock}{\relax}" + write$ newline$ + "\providecommand{\bibinfo}[2]{#2}" + write$ newline$ + "\providecommand\BIBentrySTDinterwordspacing{\spaceskip=0pt\relax}" + write$ newline$ + "\providecommand\BIBentryALTinterwordstretchfactor{" + ALTinterwordstretchfactor * "}" * + write$ newline$ + "\providecommand\BIBentryALTinterwordspacing{\spaceskip=\fontdimen2\font plus " + write$ newline$ + "\BIBentryALTinterwordstretchfactor\fontdimen3\font minus \fontdimen4\font\relax}" + write$ newline$ + "\providecommand\BIBforeignlanguage[2]{{%" + write$ newline$ + "\expandafter\ifx\csname l@#1\endcsname\relax" + write$ newline$ + "\typeout{** WARNING: IEEEtran.bst: No hyphenation pattern has been}%" + write$ newline$ + "\typeout{** loaded for the language `#1'. Using the pattern for}%" + write$ newline$ + "\typeout{** the default language instead.}%" + write$ newline$ + "\else" + write$ newline$ + "\language=\csname l@#1\endcsname" + write$ newline$ + "\fi" + write$ newline$ + "#2}}" + write$ newline$ +} + +FUNCTION {end.bib} +{ newline$ "\end{thesisbib}" write$ newline$ } + +FUNCTION {if.url.alt.interword.spacing} +{ is.use.alt.interword.spacing + {url empty$ 'skip$ {"\BIBentryALTinterwordspacing" write$ newline$} if$} + { skip$ } + if$ +} + +FUNCTION {if.url.std.interword.spacing} +{ is.use.alt.interword.spacing + {url empty$ 'skip$ {"\BIBentrySTDinterwordspacing" write$ newline$} if$} + { skip$ } + if$ +} + + + + +%%%%%%%%%%%%%%%%%%%%%%%% +%% LONGEST LABEL PASS %% +%%%%%%%%%%%%%%%%%%%%%%%% + +FUNCTION {initialize.longest.label} +{ "" 'longest.label := + #1 'number.label := + #0 'longest.label.width := +} + +FUNCTION {longest.label.pass} +{ number.label int.to.str$ 'label := + number.label #1 + 'number.label := + label width$ longest.label.width > + { label 'longest.label := + label width$ 'longest.label.width := + } + 'skip$ + if$ +} + + + + +%%%%%%%%%%%%%%%%%%%%% +%% FORMAT HANDLERS %% +%%%%%%%%%%%%%%%%%%%%% + +%% Lower Level Formats (used by higher level formats) + +FUNCTION {format.address.org.or.pub.date} +{ 't := + "" + year empty$ + { "empty year in " cite$ * warning$ } + { skip$ } + if$ + address empty$ t empty$ and + year empty$ and month empty$ and + { skip$ } + { this.to.prev.status + this.status.std + cap.status.std + address "address" bibinfo.check * + t empty$ + { skip$ } + { punct.period 'prev.status.punct := + space.large 'prev.status.space := + address empty$ + { skip$ } + { ": " * } + if$ + t * + } + if$ + year empty$ month empty$ and + { skip$ } + { t empty$ address empty$ and + { skip$ } + { ", " * } + if$ + month empty$ + { year empty$ + { skip$ } + { year "year" bibinfo.check * } + if$ + } + { month "month" bibinfo.check * + year empty$ + { skip$ } + { " " * year "year" bibinfo.check * } + if$ + } + if$ + } + if$ + } + if$ +} + + +FUNCTION {format.names} +{ 'bibinfo := + duplicate$ empty$ 'skip$ { + this.to.prev.status + this.status.std + 's := + "" 't := + #1 'nameptr := + s num.names$ 'numnames := + numnames 'namesleft := + { namesleft #0 > } + { s nameptr + name.format.string + format.name$ + bibinfo bibinfo.check + 't := + nameptr #1 > + { nameptr num.names.shown.with.forced.et.al #1 + = + numnames max.num.names.before.forced.et.al > + is.forced.et.al and and + { "others" 't := + #1 'namesleft := + } + { skip$ } + if$ + namesleft #1 > + { ", " * t do.name.latex.cmd * } + { + numnames #2 > + { "," * } + 'skip$ + if$ + s nameptr "{ll}" format.name$ duplicate$ "others" = + { 't := } + { pop$ } + if$ + t "others" = + { + " " * bbl.etal emphasize * + } + { + bbl.and + space.word * t do.name.latex.cmd * + } + if$ + } + if$ + } + { t do.name.latex.cmd } + if$ + nameptr #1 + 'nameptr := + namesleft #1 - 'namesleft := + } + while$ + cap.status.std + } if$ +} + + + + +%% Higher Level Formats + +%% addresses/locations + +FUNCTION {format.address} +{ address duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + } + if$ +} + + + +%% author/editor names + +FUNCTION {format.authors}{ author "author" format.names } + +FUNCTION {format.editors} +{ editor "editor" format.names duplicate$ empty$ 'skip$ + { ", " * + get.bbl.editor + capitalize + * + } + if$ +} + + + +%% date + +FUNCTION {format.date} +{ + month "month" bibinfo.check duplicate$ empty$ + year "year" bibinfo.check duplicate$ empty$ + { swap$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + "there's a month but no year in " cite$ * warning$ } + if$ + * + } + { this.to.prev.status + this.status.std + cap.status.std + swap$ 'skip$ + { + swap$ + " " * swap$ + } + if$ + * + } + if$ +} + +FUNCTION {format.date.electronic} +{ month "month" bibinfo.check duplicate$ empty$ + year "year" bibinfo.check duplicate$ empty$ + { swap$ + { pop$ } + { "there's a month but no year in " cite$ * warning$ + pop$ ")" * "(" swap$ * + this.to.prev.status + punct.no 'this.status.punct := + space.normal 'this.status.space := + quote.no 'this.status.quote := + cap.yes 'status.cap := + } + if$ + } + { swap$ + { swap$ pop$ ")" * "(" swap$ * } + { "(" swap$ * ", " * swap$ * ")" * } + if$ + this.to.prev.status + punct.no 'this.status.punct := + space.normal 'this.status.space := + quote.no 'this.status.quote := + cap.yes 'status.cap := + } + if$ +} + + + +%% edition/title + +% Note: IEEE considers the edition to be closely associated with +% the title of a book. So, in IEEEtran.bst the edition is normally handled +% within the formatting of the title. The format.edition function is +% retained here for possible future use. +FUNCTION {format.edition} +{ edition duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + convert.edition + status.cap + { "t" } + { "l" } + if$ change.case$ + "edition" bibinfo.check + "~" * bbl.edition * + cap.status.std + } + if$ +} + +% This is used to format the booktitle of a conference proceedings. +% Here we use the "intype" field to provide the user a way to +% override the word "in" (e.g., with things like "presented at") +% Use of intype stops the emphasis of the booktitle to indicate that +% we no longer mean the written conference proceedings, but the +% conference itself. +FUNCTION {format.in.booktitle} +{ booktitle "booktitle" bibinfo.check duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + select.language + intype missing$ + { emphasize + bbl.in " " * + } + { intype " " * } + if$ + swap$ * + cap.status.std + } + if$ +} + +% This is used to format the booktitle of collection. +% Here the "intype" field is not supported, but "edition" is. +FUNCTION {format.in.booktitle.edition} +{ booktitle "booktitle" bibinfo.check duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + select.language + emphasize + edition empty$ 'skip$ + { ", " * + edition + convert.edition + "l" change.case$ + * "~" * bbl.edition * + } + if$ + bbl.in " " * swap$ * + cap.status.std + } + if$ +} + +FUNCTION {format.article.title} +{ title duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + "t" change.case$ + } + if$ + "title" bibinfo.check + duplicate$ empty$ 'skip$ + { quote.close 'this.status.quote := + is.last.char.not.punct + { punct.std 'this.status.punct := } + { punct.no 'this.status.punct := } + if$ + select.language + "``" swap$ * + cap.status.std + } + if$ +} + +FUNCTION {format.article.title.electronic} +{ title duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + "t" change.case$ + } + if$ + "title" bibinfo.check + duplicate$ empty$ + { skip$ } + { select.language } + if$ +} + +FUNCTION {format.book.title.edition} +{ title "title" bibinfo.check + duplicate$ empty$ + { "empty title in " cite$ * warning$ } + { this.to.prev.status + this.status.std + select.language + emphasize + edition empty$ 'skip$ + { ", " * + edition + convert.edition + status.cap + { "t" } + { "l" } + if$ + change.case$ + * "~" * bbl.edition * + } + if$ + cap.status.std + } + if$ +} + +FUNCTION {format.book.title} +{ title "title" bibinfo.check + duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + select.language + emphasize + } + if$ +} + + + +%% journal + +FUNCTION {format.journal} +{ journal duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + select.language + emphasize + } + if$ +} + + + +%% how published + +FUNCTION {format.howpublished} +{ howpublished duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + } + if$ +} + + + +%% institutions/organization/publishers/school + +FUNCTION {format.institution} +{ institution duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + } + if$ +} + +FUNCTION {format.organization} +{ organization duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + } + if$ +} + +FUNCTION {format.address.publisher.date} +{ publisher "publisher" bibinfo.warn format.address.org.or.pub.date } + +FUNCTION {format.address.publisher.date.nowarn} +{ publisher "publisher" bibinfo.check format.address.org.or.pub.date } + +FUNCTION {format.address.organization.date} +{ organization "organization" bibinfo.check format.address.org.or.pub.date } + +FUNCTION {format.school} +{ school duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + } + if$ +} + + + +%% volume/number/series/chapter/pages + +FUNCTION {format.volume} +{ volume empty.field.to.null.string + duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + bbl.volume + status.cap + { capitalize } + { skip$ } + if$ + swap$ tie.or.space.prefix + "volume" bibinfo.check + * * + cap.status.std + } + if$ +} + +FUNCTION {format.number} +{ number empty.field.to.null.string + duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + status.cap + { bbl.number capitalize } + { bbl.number } + if$ + swap$ tie.or.space.prefix + "number" bibinfo.check + * * + cap.status.std + } + if$ +} + +FUNCTION {format.number.if.use.for.article} +{ is.use.number.for.article + { format.number } + { "" } + if$ +} + +% IEEE does not seem to tie the series so closely with the volume +% and number as is done in other bibliography styles. Instead the +% series is treated somewhat like an extension of the title. +FUNCTION {format.series} +{ series empty$ + { "" } + { this.to.prev.status + this.status.std + bbl.series " " * + series "series" bibinfo.check * + cap.status.std + } + if$ +} + + +FUNCTION {format.chapter} +{ chapter empty$ + { "" } + { this.to.prev.status + this.status.std + type empty$ + { bbl.chapter } + { type "l" change.case$ + "type" bibinfo.check + } + if$ + chapter tie.or.space.prefix + "chapter" bibinfo.check + * * + cap.status.std + } + if$ +} + + +% The intended use of format.paper is for paper numbers of inproceedings. +% The paper type can be overridden via the type field. +% We allow the type to be displayed even if the paper number is absent +% for things like "postdeadline paper" +FUNCTION {format.paper} +{ is.use.paper + { paper empty$ + { type empty$ + { "" } + { this.to.prev.status + this.status.std + type "type" bibinfo.check + cap.status.std + } + if$ + } + { this.to.prev.status + this.status.std + type empty$ + { bbl.paper } + { type "type" bibinfo.check } + if$ + " " * paper + "paper" bibinfo.check + * + cap.status.std + } + if$ + } + { "" } + if$ +} + + +FUNCTION {format.pages} +{ pages duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + duplicate$ is.multiple.pages + { + bbl.pages swap$ + n.dashify + } + { + bbl.page swap$ + } + if$ + tie.or.space.prefix + "pages" bibinfo.check + * * + cap.status.std + } + if$ +} + + + +%% technical report number + +FUNCTION {format.tech.report.number} +{ number "number" bibinfo.check + type duplicate$ empty$ + { pop$ + this.to.prev.status + this.status.std + cap.status.std + bbl.techrep + } + { skip$ } + if$ + "type" bibinfo.check + swap$ duplicate$ empty$ + { pop$ } + { this.to.prev.status + this.status.std + cap.status.std + tie.or.space.prefix * * } + if$ +} + + + +%% note + +FUNCTION {format.note} +{ note empty$ + { "" } + { this.to.prev.status + this.status.std + punct.period 'this.status.punct := + note #1 #1 substring$ + duplicate$ "{" = + { skip$ } + { status.cap + { "u" } + { "l" } + if$ + change.case$ + } + if$ + note #2 global.max$ substring$ * "note" bibinfo.check + cap.yes 'status.cap := + } + if$ +} + + + +%% patent + +FUNCTION {format.patent.date} +{ this.to.prev.status + this.status.std + year empty$ + { monthfiled duplicate$ empty$ + { "monthfiled" bibinfo.check pop$ "" } + { "monthfiled" bibinfo.check } + if$ + dayfiled duplicate$ empty$ + { "dayfiled" bibinfo.check pop$ "" * } + { "dayfiled" bibinfo.check + monthfiled empty$ + { "dayfiled without a monthfiled in " cite$ * warning$ + * + } + { " " swap$ * * } + if$ + } + if$ + yearfiled empty$ + { "no year or yearfiled in " cite$ * warning$ } + { yearfiled "yearfiled" bibinfo.check + swap$ + duplicate$ empty$ + { pop$ } + { ", " * swap$ * } + if$ + } + if$ + } + { month duplicate$ empty$ + { "month" bibinfo.check pop$ "" } + { "month" bibinfo.check } + if$ + day duplicate$ empty$ + { "day" bibinfo.check pop$ "" * } + { "day" bibinfo.check + month empty$ + { "day without a month in " cite$ * warning$ + * + } + { " " swap$ * * } + if$ + } + if$ + year "year" bibinfo.check + swap$ + duplicate$ empty$ + { pop$ } + { ", " * swap$ * } + if$ + } + if$ + cap.status.std +} + +FUNCTION {format.patent.nationality.type.number} +{ this.to.prev.status + this.status.std + nationality duplicate$ empty$ + { "nationality" bibinfo.warn pop$ "" } + { "nationality" bibinfo.check + duplicate$ "l" change.case$ "united states" = + { pop$ bbl.patentUS } + { skip$ } + if$ + " " * + } + if$ + type empty$ + { bbl.patent "type" bibinfo.check } + { type "type" bibinfo.check } + if$ + * + number duplicate$ empty$ + { "number" bibinfo.warn pop$ } + { "number" bibinfo.check + large.number.separate + swap$ " " * swap$ * + } + if$ + cap.status.std +} + + + +%% standard + +FUNCTION {format.organization.institution.standard.type.number} +{ this.to.prev.status + this.status.std + organization duplicate$ empty$ + { pop$ + institution duplicate$ empty$ + { "institution" bibinfo.warn } + { "institution" bibinfo.warn " " * } + if$ + } + { "organization" bibinfo.warn " " * } + if$ + type empty$ + { bbl.standard "type" bibinfo.check } + { type "type" bibinfo.check } + if$ + * + number duplicate$ empty$ + { "number" bibinfo.check pop$ } + { "number" bibinfo.check + large.number.separate + swap$ " " * swap$ * + } + if$ + cap.status.std +} + +FUNCTION {format.revision} +{ revision empty$ + { "" } + { this.to.prev.status + this.status.std + bbl.revision + revision tie.or.space.prefix + "revision" bibinfo.check + * * + cap.status.std + } + if$ +} + + +%% thesis + +FUNCTION {format.master.thesis.type} +{ this.to.prev.status + this.status.std + type empty$ + { + bbl.mthesis + } + { + type "type" bibinfo.check + } + if$ +cap.status.std +} + +FUNCTION {format.phd.thesis.type} +{ this.to.prev.status + this.status.std + type empty$ + { + bbl.phdthesis + } + { + type "type" bibinfo.check + } + if$ +cap.status.std +} + + + +%% URL + +FUNCTION {format.url} +{ url empty$ + { "" } + { this.to.prev.status + this.status.std + cap.yes 'status.cap := + bbl.urlprefix " " * + "\url{" * url * "}" * + punct.no 'this.status.punct := + punct.period 'prev.status.punct := + space.normal 'this.status.space := + space.normal 'prev.status.space := + quote.no 'this.status.quote := + } + if$ +} + + + + +%%%%%%%%%%%%%%%%%%%% +%% ENTRY HANDLERS %% +%%%%%%%%%%%%%%%%%%%% + + +% Note: In many journals, IEEE (or the authors) tend not to show the number +% for articles, so the display of the number is controlled here by the +% switch "is.use.number.for.article" +FUNCTION {article} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors "author" output.warn + name.or.dash + format.article.title "title" output.warn + format.journal "journal" bibinfo.check "journal" output.warn + format.volume output + format.number.if.use.for.article output + format.pages output + format.date "year" output.warn + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {book} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + author empty$ + { format.editors "author and editor" output.warn } + { format.authors output.nonnull } + if$ + name.or.dash + format.book.title.edition output + format.series output + author empty$ + { skip$ } + { format.editors output } + if$ + format.address.publisher.date output + format.volume output + format.number output + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {booklet} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors output + name.or.dash + format.article.title "title" output.warn + format.howpublished "howpublished" bibinfo.check output + format.organization "organization" bibinfo.check output + format.address "address" bibinfo.check output + format.date output + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {electronic} +{ std.status.using.period + start.entry + if.url.alt.interword.spacing + format.authors output + name.or.dash + format.organization "organization" bibinfo.check output + format.article.title "title" output.warn + format.howpublished "howpublished" bibinfo.check output + format.address "address" bibinfo.check output + format.note output + format.date output + format.url output + fin.entry + empty.entry.warn + if.url.std.interword.spacing +} + +FUNCTION {inbook} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + author empty$ + { format.editors "author and editor" output.warn } + { format.authors output.nonnull } + if$ + name.or.dash + format.book.title.edition output + format.series output + format.address.publisher.date output + format.volume output + format.number output + format.chapter output + format.pages output + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {incollection} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors "author" output.warn + name.or.dash + format.article.title "title" output.warn + format.in.booktitle.edition "booktitle" output.warn + format.series output + format.editors output + format.address.publisher.date.nowarn output + format.volume output + format.number output + format.chapter output + format.pages output + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {inproceedings} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors "author" output.warn + name.or.dash + format.article.title "title" output.warn + format.in.booktitle "booktitle" output.warn + format.series output + format.editors output + format.volume output + format.number output + publisher empty$ + { format.address.organization.date output } + { format.organization "organization" bibinfo.check output + format.address.publisher.date output + } + if$ + format.paper output + format.pages output + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {manual} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors output + name.or.dash + format.book.title.edition "title" output.warn + format.howpublished "howpublished" bibinfo.check output + format.organization "organization" bibinfo.check output + format.address "address" bibinfo.check output + format.date output + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {mastersthesis} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors "author" output.warn + name.or.dash + format.article.title "title" output.warn + format.master.thesis.type output.nonnull + format.school "school" bibinfo.warn output + format.address "address" bibinfo.check output + format.date "year" output.warn + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {misc} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors output + name.or.dash + format.article.title output + format.howpublished "howpublished" bibinfo.check output + format.organization "organization" bibinfo.check output + format.address "address" bibinfo.check output + format.pages output + format.date output + format.note output + format.url output + fin.entry + empty.entry.warn + if.url.std.interword.spacing +} + +FUNCTION {patent} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors output + name.or.dash + format.article.title output + format.patent.nationality.type.number output + format.patent.date output + format.note output + format.url output + fin.entry + empty.entry.warn + if.url.std.interword.spacing +} + +FUNCTION {periodical} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.editors output + name.or.dash + format.book.title "title" output.warn + format.series output + format.volume output + format.number output + format.organization "organization" bibinfo.check output + format.date "year" output.warn + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {phdthesis} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors "author" output.warn + name.or.dash + format.article.title "title" output.warn + format.phd.thesis.type output.nonnull + format.school "school" bibinfo.warn output + format.address "address" bibinfo.check output + format.date "year" output.warn + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {proceedings} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.editors output + name.or.dash + format.book.title "title" output.warn + format.series output + format.volume output + format.number output + publisher empty$ + { format.address.organization.date output } + { format.organization "organization" bibinfo.check output + format.address.publisher.date output + } + if$ + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {standard} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors output + name.or.dash + format.book.title "title" output.warn + format.howpublished "howpublished" bibinfo.check output + format.organization.institution.standard.type.number output + format.revision output + format.date output + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {techreport} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors "author" output.warn + name.or.dash + format.article.title "title" output.warn + format.howpublished "howpublished" bibinfo.check output + format.institution "institution" bibinfo.warn output + format.address "address" bibinfo.check output + format.tech.report.number output.nonnull + format.date "year" output.warn + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {unpublished} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors "author" output.warn + name.or.dash + format.article.title "title" output.warn + format.date output + format.note "note" output.warn + format.url output + fin.entry + if.url.std.interword.spacing +} + + +% The special entry type which provides the user interface to the +% BST controls +FUNCTION {IEEEtranBSTCTL} +{ is.print.banners.to.terminal + { "** IEEEtran BST control entry " quote$ * cite$ * quote$ * " detected." * + top$ + } + { skip$ } + if$ + CTLuse_article_number + empty$ + { skip$ } + { CTLuse_article_number + yes.no.to.int + 'is.use.number.for.article := + } + if$ + CTLuse_paper + empty$ + { skip$ } + { CTLuse_paper + yes.no.to.int + 'is.use.paper := + } + if$ + CTLuse_forced_etal + empty$ + { skip$ } + { CTLuse_forced_etal + yes.no.to.int + 'is.forced.et.al := + } + if$ + CTLmax_names_forced_etal + empty$ + { skip$ } + { CTLmax_names_forced_etal + string.to.integer + 'max.num.names.before.forced.et.al := + } + if$ + CTLnames_show_etal + empty$ + { skip$ } + { CTLnames_show_etal + string.to.integer + 'num.names.shown.with.forced.et.al := + } + if$ + CTLuse_alt_spacing + empty$ + { skip$ } + { CTLuse_alt_spacing + yes.no.to.int + 'is.use.alt.interword.spacing := + } + if$ + CTLalt_stretch_factor + empty$ + { skip$ } + { CTLalt_stretch_factor + 'ALTinterwordstretchfactor := + "\renewcommand\BIBentryALTinterwordstretchfactor{" + ALTinterwordstretchfactor * "}" * + write$ newline$ + } + if$ + CTLdash_repeated_names + empty$ + { skip$ } + { CTLdash_repeated_names + yes.no.to.int + 'is.dash.repeated.names := + } + if$ + CTLname_format_string + empty$ + { skip$ } + { CTLname_format_string + 'name.format.string := + } + if$ + CTLname_latex_cmd + empty$ + { skip$ } + { CTLname_latex_cmd + 'name.latex.cmd := + } + if$ + + + num.names.shown.with.forced.et.al max.num.names.before.forced.et.al > + { "CTLnames_show_etal cannot be greater than CTLmax_names_forced_etal in " cite$ * warning$ + max.num.names.before.forced.et.al 'num.names.shown.with.forced.et.al := + } + { skip$ } + if$ +} + + +%%%%%%%%%%%%%%%%%%% +%% ENTRY ALIASES %% +%%%%%%%%%%%%%%%%%%% +FUNCTION {conference}{inproceedings} +FUNCTION {online}{electronic} +FUNCTION {internet}{electronic} +FUNCTION {webpage}{electronic} +FUNCTION {default.type}{misc} + + + +%%%%%%%%%%%%%%%%%% +%% MAIN PROGRAM %% +%%%%%%%%%%%%%%%%%% + +READ + +EXECUTE {initialize.controls} +EXECUTE {initialize.status.constants} +EXECUTE {banner.message} + + + +% BEGIN sort code based on that of plain.bst + +FUNCTION {sortify} +{ purify$ + "l" change.case$ +} + +INTEGERS { len } + +FUNCTION {chop.word} +{ 's := + 'len := + s #1 len substring$ = + { s len #1 + global.max$ substring$ } + { s } + if$ +} + +FUNCTION {sort.format.names} +{ 's := + #1 'nameptr := + "" + s num.names$ 'numnames := + numnames 'namesleft := + { namesleft #0 > } + { nameptr #1 > + { " " * } + { skip$ } + if$ + s nameptr "{vv{ } }{ll{ }}{ ff{ }}{ jj{ }}" format.name$ 't := + nameptr numnames = t "others" = and + { "et al" * } + { t sortify * } + if$ + nameptr #1 + 'nameptr := + namesleft #1 - 'namesleft := + } + while$ +} + +FUNCTION {sort.format.title} +{ 't := + "A " #2 + "An " #3 + "The " #4 t chop.word + chop.word + chop.word + sortify + #1 global.max$ substring$ +} + +FUNCTION {author.sort} +{ author empty$ + { key empty$ + { "to sort, need author or key in " cite$ * warning$ "" } + { key sortify } + if$ + } + { author sort.format.names } + if$ +} + +FUNCTION {author.editor.sort} +{ author empty$ + { editor empty$ + { key empty$ + { "to sort, need author, editor, or key in " cite$ * warning$ "" } + { key sortify } + if$ + } + { editor sort.format.names } + if$ + } + { author sort.format.names } + if$ +} + +FUNCTION {author.organization.sort} +{ author empty$ + { organization empty$ + { key empty$ + { "to sort, need author, organization, or key in " cite$ * warning$ "" } + { key sortify } + if$ + } + { "The " #4 organization chop.word sortify } + if$ + } + { author sort.format.names } + if$ +} + +FUNCTION {editor.organization.sort} +{ editor empty$ + { organization empty$ + { key empty$ + { "to sort, need editor, organization, or key in " cite$ * warning$ "" } + { key sortify } + if$ + } + { "The " #4 organization chop.word sortify } + if$ + } + { editor sort.format.names } + if$ +} + +FUNCTION {author.organization.institution.sort} +{ author empty$ + { organization empty$ + { institution empty$ + { key empty$ + { "to sort, need author, organization, institution or key in " cite$ * warning$ "" } + { key sortify } + if$ + } + { "The " #4 institution chop.word sortify } + if$ + } + { "The " #4 organization chop.word sortify } + if$ + } + { author sort.format.names } + if$ +} + + +FUNCTION {presort} +{ type$ "ieeetranbstctl" = + { key empty$ + { "_" } + { key sortify } + if$ + } + { type$ "book" = + type$ "inbook" = + or + { author.editor.sort } + { type$ "proceedings" = + type$ "periodical" = + or + { editor.organization.sort } + { type$ "manual" = + type$ "electronic" = + type$ "misc" = + or or + { author.organization.sort } + { type$ "standard" = + { author.organization.institution.sort } + { author.sort } + if$ + } + if$ + } + if$ + } + if$ + " " + * + year empty.field.to.null.string sortify + * + " " + * + title empty.field.to.null.string + sort.format.title + * + } + if$ + #1 entry.max$ substring$ + 'sort.key$ := +} + +ITERATE {presort} + +SORT + +% END sort code based on that of plain.bst + + + +EXECUTE {initialize.longest.label} +ITERATE {longest.label.pass} + +EXECUTE {begin.bib} +ITERATE {call.type$} +EXECUTE {end.bib} + +EXECUTE{completed.message} + + +%% That's all folks, mds. diff --git a/build/uriref.bst b/build/uriref.bst new file mode 100644 index 0000000..3c84510 --- /dev/null +++ b/build/uriref.bst @@ -0,0 +1,2405 @@ +%% +%% uriref.bst +%% Version 1.2 (2006/06/19) +%% Created from IEEEtran.bst by Timothy Toolan +%% +%% Used to create the list of references, which is sorted in order of +%% citation, for theses and dissertations at the University of Rhode Island. +%% +%% This is used by urithesis.cls, and should be used with uribib.bst to +%% create the bibliography. +%% +%%********************************************************************** +%% +%% ChangeLog for uriref.bst: +%% +%% 1.0 (2004/10/28) +%% 1. Initial release based on IEEEtran.bst. +%% No functional changes from IEEEtran.bst. +%% +%% 1.1 (2005/07/12) +%% 1. Turned off the "dashification" of repeated (i.e., identical to +%% those of the previous entry) names. +%% +%% 1.2 (2006/06/19) +%% 1. Moved the \addcontentsline{toc} into the created .bbl file, +%% which is necessary to ensure correct page numbers. +%% +%%********************************************************************** +%% +%% IEEEtran.bst +%% BibTeX Bibliography Style file for IEEE Journals and Conferences (unsorted) +%% Version 1.11 (2003/04/02) +%% +%% Copyright (c) 2003 Michael Shell +%% +%% Original starting code base and algorithms obtained from the output of +%% Patrick W. Daly's makebst package as well as from prior versions of +%% IEEE BibTeX styles: +%% +%% 1. Howard Trickey and Oren Patashnik's ieeetr.bst (1985/1988) +%% 2. Silvano Balemi and Richard H. Roy's IEEEbib.bst (1993) +%% +%% +%% See: +%% http://www.ctan.org/tex-archive/macros/latex/contrib/supported/IEEEtran/ +%% for latest version and current contact information. +%% +%% For use with BibTeX version 0.99a or later +%% +%% This is a numerical citation style. +%% +%%********************************************************************** +%% Legal Notice: +%% This code is offered as-is without any warranty either expressed or +%% implied; without even the implied warranty of MERCHANTABILITY or +%% FITNESS FOR A PARTICULAR PURPOSE! +%% User assumes all risk. +%% In no event shall IEEE or any contributor to this code be liable for +%% any damages or losses, including, but not limited to, incidental, +%% consequential, or any other damages, resulting from the use or misuse +%% of any information contained here. +%% +%% This code is distributed under the Perl Artistic License +%% ( http://language.perl.com/misc/Artistic.html ) +%% and may be freely used, distributed and modified - subject to the +%% constraints therein. +%% Retain all contribution notices, credits and disclaimers. +%% +%% All comments are the opinions of their respective authors and are not +%% necessarily endorsed by the IEEE. +%%********************************************************************** +% +% +% Changelog: +% +% 1.00 (2002/08/13) Initial release +% +% 1.10 (2002/09/27) +% 1. Corrected minor bug for improperly formed warning message when a +% book was not given a title. Thanks to Ming Kin Lai for reporting this. +% 2. Added support for CTLname_format_string and CTLname_latex_cmd fields +% in the BST control entry type. +% +% 1.11 (2003/04/02) +% 1. Fixed bug with URLs containing underscores when using url.sty. Thanks +% to Ming Kin Lai for reporting this. + + + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% DEFAULTS FOR THE CONTROLS OF THE BST STYLE %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +% These are the defaults for the user adjustable controls. The values used +% here can be overridden by the user via IEEEtranBSTCTL entry type. + +% NOTE: The recommended LaTeX command to invoke a control entry type is: +% +%\makeatletter +%\def\bstctlcite#1{\@bsphack +% \@for\@citeb:=#1\do{% +% \edef\@citeb{\expandafter\@firstofone\@citeb}% +% \if@filesw\immediate\write\@auxout{\string\citation{\@citeb}}\fi}% +% \@esphack} +%\makeatother +% +% It is called at the start of the document, before the first \cite, like: +% \bstctlcite{IEEEexample:BSTcontrol} +% +% IEEEtran.cls V1.6 and later does provide this command. + + + +% #0 turns off the display of the number for articles. +% #1 enables +FUNCTION {default.is.use.number.for.article} { #1 } + + +% #0 turns off the display of the paper and type fields in @inproceedings. +% #1 enables +FUNCTION {default.is.use.paper} { #1 } + + +% #0 turns off the forced use of "et al." +% #1 enables +FUNCTION {default.is.forced.et.al} { #0 } + +% The maximum number of names that can be present beyond which an "et al." +% usage is forced. Be sure that num.names.shown.with.forced.et.al (below) +% is not greater than this value! +% Note: There are many instances of references in IEEE journals which have +% a very large number of authors as well as instances in which "et al." is +% used profusely. +FUNCTION {default.max.num.names.before.forced.et.al} { #10 } + +% The number of names that will be shown with a forced "et al.". +% Must be less than or equal to max.num.names.before.forced.et.al +FUNCTION {default.num.names.shown.with.forced.et.al} { #1 } + + +% #0 turns off the alternate interword spacing for entries with URLs. +% #1 enables +FUNCTION {default.is.use.alt.interword.spacing} { #1 } + +% If alternate interword spacing for entries with URLs is enabled, this is +% the interword spacing stretch factor that will be used. For example, the +% default "4" here means that the interword spacing in entries with URLs can +% stretch to four times normal. Does not have to be an integer. Note that +% the value specified here can be overridden by the user in their LaTeX +% code via a command such as: +% "\providecommand\BIBentryALTinterwordstretchfactor{1.5}" in addition to +% that via the IEEEtranBSTCTL entry type. +FUNCTION {default.ALTinterwordstretchfactor} { "4" } + + +% #0 turns off the "dashification" of repeated (i.e., identical to those +% of the previous entry) names. IEEE normally does this. +% #1 enables +FUNCTION {default.is.dash.repeated.names} { #0 } + + +% The default name format control string. +FUNCTION {default.name.format.string}{ "{f.~}{vv~}{ll}{, jj}" } + + +% The default LaTeX font command for the names. +FUNCTION {default.name.latex.cmd}{ "" } + + +% Other controls that cannot be accessed via IEEEtranBSTCTL entry type. + +% #0 turns off the terminal startup banner/completed message so as to +% operate more quietly. +% #1 enables +FUNCTION {is.print.banners.to.terminal} { #1 } + + + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% FILE VERSION AND BANNER %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +FUNCTION{bst.file.version} { "1.1" } +FUNCTION{bst.file.date} { "2005/07/12" } +FUNCTION{bst.file.website} { "http://www.ele.uri.edu/info/thesis/uritex/uriref.bst" } + +FUNCTION {banner.message} +{ is.print.banners.to.terminal + { " " + top$ + "-- University of Rhode Island references, version" " " * bst.file.version * + " (" * bst.file.date * ")" * "," * + top$ + "-- based on IEEEtran.bst version 1.11 (2003/04/02) by Michael Shell." + top$ + "-- " bst.file.website * + top$ + "-- See the manual " quote$ * "IEEEtran_bst_HOWTO.pdf" * quote$ * " for usage information," * + top$ + "-- available at http://www.ele.uri.edu/info/thesis/IEEEtran_bst_HOWTO.pdf" + top$ + } + { skip$ } + if$ +} + +FUNCTION {completed.message} +{ is.print.banners.to.terminal + { "" + top$ + "Done." + top$ + } + { skip$ } + if$ +} + + + + +%%%%%%%%%%%%%%%%%%%%%% +%% STRING CONSTANTS %% +%%%%%%%%%%%%%%%%%%%%%% + +FUNCTION {bbl.and}{ "and" } +FUNCTION {bbl.etal}{ "et~al." } +FUNCTION {bbl.editors}{ "eds." } +FUNCTION {bbl.editor}{ "ed." } +FUNCTION {bbl.edition}{ "ed." } +FUNCTION {bbl.volume}{ "vol." } +FUNCTION {bbl.of}{ "of" } +FUNCTION {bbl.number}{ "no." } +FUNCTION {bbl.in}{ "in" } +FUNCTION {bbl.pages}{ "pp." } +FUNCTION {bbl.page}{ "p." } +FUNCTION {bbl.chapter}{ "ch." } +FUNCTION {bbl.paper}{ "paper" } +FUNCTION {bbl.part}{ "pt." } +FUNCTION {bbl.patent}{ "Patent" } +FUNCTION {bbl.patentUS}{ "U.S." } +FUNCTION {bbl.revision}{ "Rev." } +FUNCTION {bbl.series}{ "ser." } +FUNCTION {bbl.standard}{ "Std." } +FUNCTION {bbl.techrep}{ "Tech. Rep." } +FUNCTION {bbl.mthesis}{ "Master's thesis" } +FUNCTION {bbl.phdthesis}{ "Ph.D. dissertation" } +FUNCTION {bbl.urlprefix}{ "[Online]. Available:" } +FUNCTION {bbl.st}{ "st" } +FUNCTION {bbl.nd}{ "nd" } +FUNCTION {bbl.rd}{ "rd" } +FUNCTION {bbl.th}{ "th" } + + +% This is the LaTeX spacer that is used when a larger than normal space +% is called for (such as just before the address:publisher). +FUNCTION {large.space} { "\hskip 1em plus 0.5em minus 0.4em\relax " } + +% The LaTeX code for dashes that are used to represent repeated names. +% Note: Some older IEEE journals used something like +% "\rule{0.275in}{0.5pt}\," which is fairly thick and runs right along +% the baseline. However, IEEE now uses a thinner, above baseline, +% six dash long sequence. +FUNCTION {repeated.name.dashes} { "------" } + + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% PREDEFINED STRING MACROS %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +MACRO {jan} {"Jan."} +MACRO {feb} {"Feb."} +MACRO {mar} {"Mar."} +MACRO {apr} {"Apr."} +MACRO {may} {"May"} +MACRO {jun} {"June"} +MACRO {jul} {"July"} +MACRO {aug} {"Aug."} +MACRO {sep} {"Sept."} +MACRO {oct} {"Oct."} +MACRO {nov} {"Nov."} +MACRO {dec} {"Dec."} + + + +%%%%%%%%%%%%%%%%%% +%% ENTRY FIELDS %% +%%%%%%%%%%%%%%%%%% + +ENTRY + { address + assignee + author + booktitle + chapter + day + dayfiled + edition + editor + howpublished + institution + intype + journal + key + language + month + monthfiled + nationality + note + number + organization + pages + paper + publisher + school + series + revision + title + type + url + volume + year + yearfiled + CTLuse_article_number + CTLuse_paper + CTLuse_forced_etal + CTLmax_names_forced_etal + CTLnames_show_etal + CTLuse_alt_spacing + CTLalt_stretch_factor + CTLdash_repeated_names + CTLname_format_string + CTLname_latex_cmd + } + {} + { label } + + + + +%%%%%%%%%%%%%%%%%%%%%%% +%% INTEGER VARIABLES %% +%%%%%%%%%%%%%%%%%%%%%%% + +INTEGERS { prev.status.punct this.status.punct punct.std + punct.no punct.comma punct.period + prev.status.space this.status.space space.std + space.no space.normal space.large + prev.status.quote this.status.quote quote.std + quote.no quote.close + prev.status.nline this.status.nline nline.std + nline.no nline.newblock + status.cap cap.std + cap.no cap.yes} + +INTEGERS { longest.label.width multiresult nameptr namesleft number.label numnames } + +INTEGERS { is.use.number.for.article + is.use.paper + is.forced.et.al + max.num.names.before.forced.et.al + num.names.shown.with.forced.et.al + is.use.alt.interword.spacing + is.dash.repeated.names} + + +%%%%%%%%%%%%%%%%%%%%%% +%% STRING VARIABLES %% +%%%%%%%%%%%%%%%%%%%%%% + +STRINGS { bibinfo + longest.label + oldname + s + t + ALTinterwordstretchfactor + name.format.string + name.latex.cmd} + + + + +%%%%%%%%%%%%%%%%%%%%%%%%% +%% LOW LEVEL FUNCTIONS %% +%%%%%%%%%%%%%%%%%%%%%%%%% + +FUNCTION {initialize.controls} +{ default.is.use.number.for.article 'is.use.number.for.article := + default.is.use.paper 'is.use.paper := + default.is.forced.et.al 'is.forced.et.al := + default.max.num.names.before.forced.et.al 'max.num.names.before.forced.et.al := + default.num.names.shown.with.forced.et.al 'num.names.shown.with.forced.et.al := + default.is.use.alt.interword.spacing 'is.use.alt.interword.spacing := + default.is.dash.repeated.names 'is.dash.repeated.names := + default.ALTinterwordstretchfactor 'ALTinterwordstretchfactor := + default.name.format.string 'name.format.string := + default.name.latex.cmd 'name.latex.cmd := +} + + +% This IEEEtran.bst features a very powerful and flexible mechanism for +% controlling the capitalization, punctuation, spacing, quotation, and +% newlines of the formatted entry fields. (Note: IEEEtran.bst does not need +% or use the newline/newblock feature, but it has been implemented for +% possible future use.) The output states of IEEEtran.bst consist of +% multiple independent attributes and, as such, can be thought of as being +% vectors, rather than the simple scalar values ("before.all", +% "mid.sentence", etc.) used in most other .bst files. +% +% The more flexible and complex design used here was motivated in part by +% IEEE's rather unusual bibliography style. For example, IEEE ends the +% previous field item with a period and large space prior to the publisher +% address; the @electronic entry types use periods as inter-item punctuation +% rather than the commas used by the other entry types; and URLs are never +% followed by periods even though they are the last item in the entry. +% Although it is possible to accommodate these features with the conventional +% output state system, the seemingly endless exceptions make for convoluted, +% unreliable and difficult to maintain code. +% +% IEEEtran.bst's output state system can be easily understood via a simple +% illustration of two most recently formatted entry fields (on the stack): +% +% CURRENT_ITEM +% "PREVIOUS_ITEM +% +% which, in this example, is to eventually appear in the bibliography as: +% +% "PREVIOUS_ITEM," CURRENT_ITEM +% +% It is the job of the output routine to take the previous item off of the +% stack (while leaving the current item at the top of the stack), apply its +% trailing punctuation (including closing quote marks) and spacing, and then +% to write the result to BibTeX's output buffer: +% +% "PREVIOUS_ITEM," +% +% Punctuation (and spacing) between items is often determined by both of the +% items rather than just the first one. The presence of quotation marks +% further complicates the situation because, in standard English, trailing +% punctuation marks are supposed to be contained within the quotes. +% +% IEEEtran.bst maintains two output state (aka "status") vectors which +% correspond to the previous and current (aka "this") items. Each vector +% consists of several independent attributes which track punctuation, +% spacing, quotation, and newlines. Capitalization status is handled by a +% separate scalar because the format routines, not the output routine, +% handle capitalization and, therefore, there is no need to maintain the +% capitalization attribute for both the "previous" and "this" items. +% +% When a format routine adds a new item, it copies the current output status +% vector to the previous output status vector and (usually) resets the +% current (this) output status vector to a "standard status" vector. Using a +% "standard status" vector in this way allows us to redefine what we mean by +% "standard status" at the start of each entry handler and reuse the same +% format routines under the various inter-item separation schemes. For +% example, the standard status vector for the @book entry type may use +% commas for item separators, while the @electronic type may use periods, +% yet both entry handlers exploit many of the exact same format routines. +% +% Because format routines have write access to the output status vector of +% the previous item, they can override the punctuation choices of the +% previous format routine! Therefore, it becomes trivial to implement rules +% such as "Always use a period and a large space before the publisher." By +% pushing the generation of the closing quote mark to the output routine, we +% avoid all the problems caused by having to close a quote before having all +% the information required to determine what the punctuation should be. +% +% The IEEEtran.bst output state system can easily be expanded if needed. +% For instance, it is easy to add a "space.tie" attribute value if the +% bibliography rules mandate that two items have to be joined with an +% unbreakable space. + +FUNCTION {initialize.status.constants} +{ #0 'punct.no := + #1 'punct.comma := + #2 'punct.period := + #0 'space.no := + #1 'space.normal := + #2 'space.large := + #0 'quote.no := + #1 'quote.close := + #0 'cap.no := + #1 'cap.yes := + #0 'nline.no := + #1 'nline.newblock := +} + +FUNCTION {std.status.using.comma} +{ punct.comma 'punct.std := + space.normal 'space.std := + quote.no 'quote.std := + nline.no 'nline.std := + cap.no 'cap.std := +} + +FUNCTION {std.status.using.period} +{ punct.period 'punct.std := + space.normal 'space.std := + quote.no 'quote.std := + nline.no 'nline.std := + cap.yes 'cap.std := +} + +FUNCTION {initialize.prev.this.status} +{ punct.no 'prev.status.punct := + space.no 'prev.status.space := + quote.no 'prev.status.quote := + nline.no 'prev.status.nline := + punct.no 'this.status.punct := + space.no 'this.status.space := + quote.no 'this.status.quote := + nline.no 'this.status.nline := + cap.yes 'status.cap := +} + +FUNCTION {this.status.std} +{ punct.std 'this.status.punct := + space.std 'this.status.space := + quote.std 'this.status.quote := + nline.std 'this.status.nline := +} + +FUNCTION {cap.status.std}{ cap.std 'status.cap := } + +FUNCTION {this.to.prev.status} +{ this.status.punct 'prev.status.punct := + this.status.space 'prev.status.space := + this.status.quote 'prev.status.quote := + this.status.nline 'prev.status.nline := +} + + +FUNCTION {not} +{ { #0 } + { #1 } + if$ +} + +FUNCTION {and} +{ { skip$ } + { pop$ #0 } + if$ +} + +FUNCTION {or} +{ { pop$ #1 } + { skip$ } + if$ +} + + +% convert the strings "yes" or "no" to #1 or #0 respectively +FUNCTION {yes.no.to.int} +{ "l" change.case$ duplicate$ + "yes" = + { pop$ #1 } + { duplicate$ "no" = + { pop$ #0 } + { "unknown boolean " quote$ * swap$ * quote$ * + " in " * cite$ * warning$ + #0 + } + if$ + } + if$ +} + + +% pushes true if the single char string on the stack is in the +% range of "0" to "9" +FUNCTION {is.num} +{ chr.to.int$ + duplicate$ "0" chr.to.int$ < not + swap$ "9" chr.to.int$ > not and +} + +% multiplies the integer on the stack by a factor of 10 +FUNCTION {bump.int.mag} +{ #0 'multiresult := + { duplicate$ #0 > } + { #1 - + multiresult #10 + + 'multiresult := + } + while$ +pop$ +multiresult +} + +% converts a single character string on the stack to an integer +FUNCTION {char.to.integer} +{ duplicate$ + is.num + { chr.to.int$ "0" chr.to.int$ - } + {"noninteger character " quote$ * swap$ * quote$ * + " in integer field of " * cite$ * warning$ + #0 + } + if$ +} + +% converts a string on the stack to an integer +FUNCTION {string.to.integer} +{ duplicate$ text.length$ 'namesleft := + #1 'nameptr := + #0 'numnames := + { nameptr namesleft > not } + { duplicate$ nameptr #1 substring$ + char.to.integer numnames bump.int.mag + + 'numnames := + nameptr #1 + + 'nameptr := + } + while$ +pop$ +numnames +} + + + + +% The output routines write out the *next* to the top (previous) item on the +% stack, adding punctuation and such as needed. Since IEEEtran.bst maintains +% the output status for the top two items on the stack, these output +% routines have to consider the previous output status (which corresponds to +% the item that is being output). Full independent control of punctuation, +% closing quote marks, spacing, and newblock is provided. +% +% "output.nonnull" does not check for the presence of a previous empty +% item. +% +% "output" does check for the presence of a previous empty item and will +% remove an empty item rather than outputing it. +% +% "output.warn" is like "output", but will issue a warning if it detects +% an empty item. + +FUNCTION {output.nonnull} +{ swap$ + prev.status.punct punct.comma = + { "," * } + { skip$ } + if$ + prev.status.punct punct.period = + { add.period$ } + { skip$ } + if$ + prev.status.quote quote.close = + { "''" * } + { skip$ } + if$ + prev.status.space space.normal = + { " " * } + { skip$ } + if$ + prev.status.space space.large = + { large.space * } + { skip$ } + if$ + write$ + prev.status.nline nline.newblock = + { newline$ "\newblock " write$ } + { skip$ } + if$ +} + +FUNCTION {output} +{ duplicate$ empty$ + 'pop$ + 'output.nonnull + if$ +} + +FUNCTION {output.warn} +{ 't := + duplicate$ empty$ + { pop$ "empty " t * " in " * cite$ * warning$ } + 'output.nonnull + if$ +} + +% "fin.entry" is the output routine that handles the last item of the entry +% (which will be on the top of the stack when "fin.entry" is called). + +FUNCTION {fin.entry} +{ this.status.punct punct.no = + { skip$ } + { add.period$ } + if$ + this.status.quote quote.close = + { "''" * } + { skip$ } + if$ +write$ +newline$ +} + + +FUNCTION {is.last.char.not.punct} +{ duplicate$ + "}" * add.period$ + #-1 #1 substring$ "." = +} + +FUNCTION {is.multiple.pages} +{ 't := + #0 'multiresult := + { multiresult not + t empty$ not + and + } + { t #1 #1 substring$ + duplicate$ "-" = + swap$ duplicate$ "," = + swap$ "+" = + or or + { #1 'multiresult := } + { t #2 global.max$ substring$ 't := } + if$ + } + while$ + multiresult +} + +FUNCTION {capitalize}{ "u" change.case$ "t" change.case$ } + +FUNCTION {emphasize} +{ duplicate$ empty$ + { pop$ "" } + { "\emph{" swap$ * "}" * } + if$ +} + +FUNCTION {do.name.latex.cmd} +{ name.latex.cmd + empty$ + { skip$ } + { name.latex.cmd "{" * swap$ * "}" * } + if$ +} + +% IEEEtran.bst uses its own \BIBforeignlanguage command which directly +% invokes the TeX hyphenation patterns without the need of the Babel +% package. Babel does a lot more than switch hyphenation patterns and +% its loading can cause unintended effects in many class files (such as +% IEEEtran.cls). +FUNCTION {select.language} +{ duplicate$ empty$ 'pop$ + { language empty$ 'skip$ + { "\BIBforeignlanguage{" language * "}{" * swap$ * "}" * } + if$ + } + if$ +} + +FUNCTION {tie.or.space.prefix} +{ duplicate$ text.length$ #3 < + { "~" } + { " " } + if$ + swap$ +} + +FUNCTION {get.bbl.editor} +{ editor num.names$ #1 > 'bbl.editors 'bbl.editor if$ } + +FUNCTION {space.word}{ " " swap$ * " " * } + + +% Field Conditioners, Converters, Checkers and External Interfaces + +FUNCTION {empty.field.to.null.string} +{ duplicate$ empty$ + { pop$ "" } + { skip$ } + if$ +} + +FUNCTION {either.or.check} +{ empty$ + { pop$ } + { "can't use both " swap$ * " fields in " * cite$ * warning$ } + if$ +} + +FUNCTION {empty.entry.warn} +{ author empty$ title empty$ howpublished empty$ + month empty$ year empty$ note empty$ url empty$ + and and and and and and + { "all relevant fields are empty in " cite$ * warning$ } + 'skip$ + if$ +} + + +% The bibinfo system provides a way for the electronic parsing/acquisition +% of a bibliography's contents as is done by ReVTeX. For example, a field +% could be entered into the bibliography as: +% \bibinfo{volume}{2} +% Only the "2" would show up in the document, but the LaTeX \bibinfo command +% could do additional things with the information. IEEEtran.bst does provide +% a \bibinfo command via "\providecommand{\bibinfo}[2]{#2}". However, it is +% currently not used as the bogus bibinfo functions defined here output the +% entry values directly without the \bibinfo wrapper. The bibinfo functions +% themselves (and the calls to them) are retained for possible future use. +% +% bibinfo.check avoids acting on missing fields while bibinfo.warn will +% issue a warning message if a missing field is detected. Prior to calling +% the bibinfo functions, the user should push the field value and then its +% name string, in that order. + +FUNCTION {bibinfo.check} +{ swap$ duplicate$ missing$ + { pop$ pop$ "" } + { duplicate$ empty$ + { swap$ pop$ } + { swap$ pop$ } + if$ + } + if$ +} + +FUNCTION {bibinfo.warn} +{ swap$ duplicate$ missing$ + { swap$ "missing " swap$ * " in " * cite$ * warning$ pop$ "" } + { duplicate$ empty$ + { swap$ "empty " swap$ * " in " * cite$ * warning$ } + { swap$ pop$ } + if$ + } + if$ +} + + +% IEEE separates large numbers with more than 4 digits into groups of +% three. IEEE uses a small space to separate these number groups. +% Typical applications include patent and page numbers. + +% number of consecutive digits required to trigger the group separation. +FUNCTION {large.number.trigger}{ #5 } + +% For numbers longer than the trigger, this is the blocksize of the groups. +% The blocksize must be less than the trigger threshold, and 2 * blocksize +% must be greater than the trigger threshold (can't do more than one +% separation on the initial trigger). +FUNCTION {large.number.blocksize}{ #3 } + +% What is actually inserted between the number groups. +FUNCTION {large.number.separator}{ "\," } + +% So as to save on integer variables by reusing existing ones, numnames +% holds the current number of consecutive digits read and nameptr holds +% the number that will trigger an inserted space. +FUNCTION {large.number.separate} +{ 't := + "" + #0 'numnames := + large.number.trigger 'nameptr := + { t empty$ not } + { t #-1 #1 substring$ is.num + { numnames #1 + 'numnames := } + { #0 'numnames := + large.number.trigger 'nameptr := + } + if$ + t #-1 #1 substring$ swap$ * + t #-2 global.max$ substring$ 't := + numnames nameptr = + { duplicate$ #1 nameptr large.number.blocksize - substring$ swap$ + nameptr large.number.blocksize - #1 + global.max$ substring$ + large.number.separator swap$ * * + nameptr large.number.blocksize - 'numnames := + large.number.blocksize #1 + 'nameptr := + } + { skip$ } + if$ + } + while$ +} + +% Converts all single dashes "-" to double dashes "--". +FUNCTION {n.dashify} +{ large.number.separate + 't := + "" + { t empty$ not } + { t #1 #1 substring$ "-" = + { t #1 #2 substring$ "--" = not + { "\textendash" * + t #2 global.max$ substring$ 't := + } + { { t #1 #1 substring$ "-" = } + { "" * + t #2 global.max$ substring$ 't := + } + while$ + } + if$ + } + { t #1 #1 substring$ * + t #2 global.max$ substring$ 't := + } + if$ + } + while$ +} + + +% This function detects entries with names that are identical to that of +% the previous entry and replaces the repeated names with dashes (if the +% "is.dash.repeated.names" user control is nonzero). +FUNCTION {name.or.dash} +{ 's := + oldname empty$ + { s 'oldname := s } + { s oldname = + { is.dash.repeated.names + { repeated.name.dashes } + { s 'oldname := s } + if$ + } + { s 'oldname := s } + if$ + } + if$ +} + +% Converts the number string on the top of the stack to +% "numerical ordinal form" (e.g., "7" to "7th"). There is +% no artificial limit to the upper bound of the numbers as the +% least significant digit always determines the ordinal form. +FUNCTION {num.to.ordinal} +{ duplicate$ #-1 #1 substring$ "1" = + { bbl.st * } + { duplicate$ #-1 #1 substring$ "2" = + { bbl.nd * } + { duplicate$ #-1 #1 substring$ "3" = + { bbl.rd * } + { bbl.th * } + if$ + } + if$ + } + if$ +} + +% If the string on the top of the stack begins with a number, +% (e.g., 11th) then replace the string with the leading number +% it contains. Otherwise retain the string as-is. s holds the +% extracted number, t holds the part of the string that remains +% to be scanned. +FUNCTION {extract.num} +{ duplicate$ 't := + "" 's := + { t empty$ not } + { t #1 #1 substring$ + t #2 global.max$ substring$ 't := + duplicate$ is.num + { s swap$ * 's := } + { pop$ "" 't := } + if$ + } + while$ + s empty$ + 'skip$ + { pop$ s } + if$ +} + +% Converts the word number string on the top of the stack to +% Arabic string form. Will be successful up to "tenth". +FUNCTION {word.to.num} +{ duplicate$ "l" change.case$ 's := + s "first" = + { pop$ "1" } + { skip$ } + if$ + s "second" = + { pop$ "2" } + { skip$ } + if$ + s "third" = + { pop$ "3" } + { skip$ } + if$ + s "fourth" = + { pop$ "4" } + { skip$ } + if$ + s "fifth" = + { pop$ "5" } + { skip$ } + if$ + s "sixth" = + { pop$ "6" } + { skip$ } + if$ + s "seventh" = + { pop$ "7" } + { skip$ } + if$ + s "eighth" = + { pop$ "8" } + { skip$ } + if$ + s "ninth" = + { pop$ "9" } + { skip$ } + if$ + s "tenth" = + { pop$ "10" } + { skip$ } + if$ +} + + +% Converts the string on the top of the stack to numerical +% ordinal (e.g., "11th") form. +FUNCTION {convert.edition} +{ duplicate$ empty$ 'skip$ + { duplicate$ #1 #1 substring$ is.num + { extract.num + num.to.ordinal + } + { word.to.num + duplicate$ #1 #1 substring$ is.num + { num.to.ordinal } + { "edition ordinal word " quote$ * edition * quote$ * + " may be too high (or improper) for conversion" * " in " * cite$ * warning$ + } + if$ + } + if$ + } + if$ +} + + + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% LATEX BIBLIOGRAPHY CODE %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +FUNCTION {start.entry} +{ newline$ + "\bibitem{" write$ + cite$ write$ + "}" write$ + newline$ + "" + initialize.prev.this.status +} + +% Here we write out all the LaTeX code that we will need. The most involved +% code sequences are those that control the alternate interword spacing and +% foreign language hyphenation patterns. The heavy use of \providecommand +% gives users a way to override the defaults. Special thanks to Javier Bezos, +% Johannes Braams, Robin Fairburns, Heiko Oberdiek, Donald Arseneau and all +% the other gurus on comp.text.tex for their help and advice on the topic of +% \selectlanguage, Babel and BibTeX. +FUNCTION {begin.bib} +{ preamble$ empty$ 'skip$ + { preamble$ write$ newline$ } + if$ + "\begin{thebibliography}{" longest.label * "}" * + write$ newline$ + "\providecommand{\url}[1]{#1}" + write$ newline$ + "\addcustomcontentsline" + write$ newline$ + "\csname url@rmstyle\endcsname" + write$ newline$ + "\providecommand{\newblock}{\relax}" + write$ newline$ + "\providecommand{\bibinfo}[2]{#2}" + write$ newline$ + "\providecommand\BIBentrySTDinterwordspacing{\spaceskip=0pt\relax}" + write$ newline$ + "\providecommand\BIBentryALTinterwordstretchfactor{" + ALTinterwordstretchfactor * "}" * + write$ newline$ + "\providecommand\BIBentryALTinterwordspacing{\spaceskip=\fontdimen2\font plus " + write$ newline$ + "\BIBentryALTinterwordstretchfactor\fontdimen3\font minus \fontdimen4\font\relax}" + write$ newline$ + "\providecommand\BIBforeignlanguage[2]{{%" + write$ newline$ + "\expandafter\ifx\csname l@#1\endcsname\relax" + write$ newline$ + "\typeout{** WARNING: IEEEtran.bst: No hyphenation pattern has been}%" + write$ newline$ + "\typeout{** loaded for the language `#1'. Using the pattern for}%" + write$ newline$ + "\typeout{** the default language instead.}%" + write$ newline$ + "\else" + write$ newline$ + "\language=\csname l@#1\endcsname" + write$ newline$ + "\fi" + write$ newline$ + "#2}}" + write$ newline$ +} + +FUNCTION {end.bib} +{ newline$ "\end{thebibliography}" write$ newline$ } + +FUNCTION {if.url.alt.interword.spacing} +{ is.use.alt.interword.spacing + {url empty$ 'skip$ {"\BIBentryALTinterwordspacing" write$ newline$} if$} + { skip$ } + if$ +} + +FUNCTION {if.url.std.interword.spacing} +{ is.use.alt.interword.spacing + {url empty$ 'skip$ {"\BIBentrySTDinterwordspacing" write$ newline$} if$} + { skip$ } + if$ +} + + + + +%%%%%%%%%%%%%%%%%%%%%%%% +%% LONGEST LABEL PASS %% +%%%%%%%%%%%%%%%%%%%%%%%% + +FUNCTION {initialize.longest.label} +{ "" 'longest.label := + #1 'number.label := + #0 'longest.label.width := +} + +FUNCTION {longest.label.pass} +{ number.label int.to.str$ 'label := + number.label #1 + 'number.label := + label width$ longest.label.width > + { label 'longest.label := + label width$ 'longest.label.width := + } + 'skip$ + if$ +} + + + + +%%%%%%%%%%%%%%%%%%%%% +%% FORMAT HANDLERS %% +%%%%%%%%%%%%%%%%%%%%% + +%% Lower Level Formats (used by higher level formats) + +FUNCTION {format.address.org.or.pub.date} +{ 't := + "" + year empty$ + { "empty year in " cite$ * warning$ } + { skip$ } + if$ + address empty$ t empty$ and + year empty$ and month empty$ and + { skip$ } + { this.to.prev.status + this.status.std + cap.status.std + address "address" bibinfo.check * + t empty$ + { skip$ } + { punct.period 'prev.status.punct := + space.large 'prev.status.space := + address empty$ + { skip$ } + { ": " * } + if$ + t * + } + if$ + year empty$ month empty$ and + { skip$ } + { t empty$ address empty$ and + { skip$ } + { ", " * } + if$ + month empty$ + { year empty$ + { skip$ } + { year "year" bibinfo.check * } + if$ + } + { month "month" bibinfo.check * + year empty$ + { skip$ } + { " " * year "year" bibinfo.check * } + if$ + } + if$ + } + if$ + } + if$ +} + + +FUNCTION {format.names} +{ 'bibinfo := + duplicate$ empty$ 'skip$ { + this.to.prev.status + this.status.std + 's := + "" 't := + #1 'nameptr := + s num.names$ 'numnames := + numnames 'namesleft := + { namesleft #0 > } + { s nameptr + name.format.string + format.name$ + bibinfo bibinfo.check + 't := + nameptr #1 > + { nameptr num.names.shown.with.forced.et.al #1 + = + numnames max.num.names.before.forced.et.al > + is.forced.et.al and and + { "others" 't := + #1 'namesleft := + } + { skip$ } + if$ + namesleft #1 > + { ", " * t do.name.latex.cmd * } + { + numnames #2 > + { "," * } + 'skip$ + if$ + s nameptr "{ll}" format.name$ duplicate$ "others" = + { 't := } + { pop$ } + if$ + t "others" = + { + " " * bbl.etal emphasize * + } + { + bbl.and + space.word * t do.name.latex.cmd * + } + if$ + } + if$ + } + { t do.name.latex.cmd } + if$ + nameptr #1 + 'nameptr := + namesleft #1 - 'namesleft := + } + while$ + cap.status.std + } if$ +} + + + + +%% Higher Level Formats + +%% addresses/locations + +FUNCTION {format.address} +{ address duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + } + if$ +} + + + +%% author/editor names + +FUNCTION {format.authors}{ author "author" format.names } + +FUNCTION {format.editors} +{ editor "editor" format.names duplicate$ empty$ 'skip$ + { ", " * + get.bbl.editor + capitalize + * + } + if$ +} + + + +%% date + +FUNCTION {format.date} +{ + month "month" bibinfo.check duplicate$ empty$ + year "year" bibinfo.check duplicate$ empty$ + { swap$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + "there's a month but no year in " cite$ * warning$ } + if$ + * + } + { this.to.prev.status + this.status.std + cap.status.std + swap$ 'skip$ + { + swap$ + " " * swap$ + } + if$ + * + } + if$ +} + +FUNCTION {format.date.electronic} +{ month "month" bibinfo.check duplicate$ empty$ + year "year" bibinfo.check duplicate$ empty$ + { swap$ + { pop$ } + { "there's a month but no year in " cite$ * warning$ + pop$ ")" * "(" swap$ * + this.to.prev.status + punct.no 'this.status.punct := + space.normal 'this.status.space := + quote.no 'this.status.quote := + cap.yes 'status.cap := + } + if$ + } + { swap$ + { swap$ pop$ ")" * "(" swap$ * } + { "(" swap$ * ", " * swap$ * ")" * } + if$ + this.to.prev.status + punct.no 'this.status.punct := + space.normal 'this.status.space := + quote.no 'this.status.quote := + cap.yes 'status.cap := + } + if$ +} + + + +%% edition/title + +% Note: IEEE considers the edition to be closely associated with +% the title of a book. So, in IEEEtran.bst the edition is normally handled +% within the formatting of the title. The format.edition function is +% retained here for possible future use. +FUNCTION {format.edition} +{ edition duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + convert.edition + status.cap + { "t" } + { "l" } + if$ change.case$ + "edition" bibinfo.check + "~" * bbl.edition * + cap.status.std + } + if$ +} + +% This is used to format the booktitle of a conference proceedings. +% Here we use the "intype" field to provide the user a way to +% override the word "in" (e.g., with things like "presented at") +% Use of intype stops the emphasis of the booktitle to indicate that +% we no longer mean the written conference proceedings, but the +% conference itself. +FUNCTION {format.in.booktitle} +{ booktitle "booktitle" bibinfo.check duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + select.language + intype missing$ + { emphasize + bbl.in " " * + } + { intype " " * } + if$ + swap$ * + cap.status.std + } + if$ +} + +% This is used to format the booktitle of collection. +% Here the "intype" field is not supported, but "edition" is. +FUNCTION {format.in.booktitle.edition} +{ booktitle "booktitle" bibinfo.check duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + select.language + emphasize + edition empty$ 'skip$ + { ", " * + edition + convert.edition + "l" change.case$ + * "~" * bbl.edition * + } + if$ + bbl.in " " * swap$ * + cap.status.std + } + if$ +} + +FUNCTION {format.article.title} +{ title duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + "t" change.case$ + } + if$ + "title" bibinfo.check + duplicate$ empty$ 'skip$ + { quote.close 'this.status.quote := + is.last.char.not.punct + { punct.std 'this.status.punct := } + { punct.no 'this.status.punct := } + if$ + select.language + "``" swap$ * + cap.status.std + } + if$ +} + +FUNCTION {format.article.title.electronic} +{ title duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + "t" change.case$ + } + if$ + "title" bibinfo.check + duplicate$ empty$ + { skip$ } + { select.language } + if$ +} + +FUNCTION {format.book.title.edition} +{ title "title" bibinfo.check + duplicate$ empty$ + { "empty title in " cite$ * warning$ } + { this.to.prev.status + this.status.std + select.language + emphasize + edition empty$ 'skip$ + { ", " * + edition + convert.edition + status.cap + { "t" } + { "l" } + if$ + change.case$ + * "~" * bbl.edition * + } + if$ + cap.status.std + } + if$ +} + +FUNCTION {format.book.title} +{ title "title" bibinfo.check + duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + select.language + emphasize + } + if$ +} + + + +%% journal + +FUNCTION {format.journal} +{ journal duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + select.language + emphasize + } + if$ +} + + + +%% how published + +FUNCTION {format.howpublished} +{ howpublished duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + } + if$ +} + + + +%% institutions/organization/publishers/school + +FUNCTION {format.institution} +{ institution duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + } + if$ +} + +FUNCTION {format.organization} +{ organization duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + } + if$ +} + +FUNCTION {format.address.publisher.date} +{ publisher "publisher" bibinfo.warn format.address.org.or.pub.date } + +FUNCTION {format.address.publisher.date.nowarn} +{ publisher "publisher" bibinfo.check format.address.org.or.pub.date } + +FUNCTION {format.address.organization.date} +{ organization "organization" bibinfo.check format.address.org.or.pub.date } + +FUNCTION {format.school} +{ school duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + } + if$ +} + + + +%% volume/number/series/chapter/pages + +FUNCTION {format.volume} +{ volume empty.field.to.null.string + duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + bbl.volume + status.cap + { capitalize } + { skip$ } + if$ + swap$ tie.or.space.prefix + "volume" bibinfo.check + * * + cap.status.std + } + if$ +} + +FUNCTION {format.number} +{ number empty.field.to.null.string + duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + status.cap + { bbl.number capitalize } + { bbl.number } + if$ + swap$ tie.or.space.prefix + "number" bibinfo.check + * * + cap.status.std + } + if$ +} + +FUNCTION {format.number.if.use.for.article} +{ is.use.number.for.article + { format.number } + { "" } + if$ +} + +% IEEE does not seem to tie the series so closely with the volume +% and number as is done in other bibliography styles. Instead the +% series is treated somewhat like an extension of the title. +FUNCTION {format.series} +{ series empty$ + { "" } + { this.to.prev.status + this.status.std + bbl.series " " * + series "series" bibinfo.check * + cap.status.std + } + if$ +} + + +FUNCTION {format.chapter} +{ chapter empty$ + { "" } + { this.to.prev.status + this.status.std + type empty$ + { bbl.chapter } + { type "l" change.case$ + "type" bibinfo.check + } + if$ + chapter tie.or.space.prefix + "chapter" bibinfo.check + * * + cap.status.std + } + if$ +} + + +% The intended use of format.paper is for paper numbers of inproceedings. +% The paper type can be overridden via the type field. +% We allow the type to be displayed even if the paper number is absent +% for things like "postdeadline paper" +FUNCTION {format.paper} +{ is.use.paper + { paper empty$ + { type empty$ + { "" } + { this.to.prev.status + this.status.std + type "type" bibinfo.check + cap.status.std + } + if$ + } + { this.to.prev.status + this.status.std + type empty$ + { bbl.paper } + { type "type" bibinfo.check } + if$ + " " * paper + "paper" bibinfo.check + * + cap.status.std + } + if$ + } + { "" } + if$ +} + + +FUNCTION {format.pages} +{ pages duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + duplicate$ is.multiple.pages + { + bbl.pages swap$ + n.dashify + } + { + bbl.page swap$ + } + if$ + tie.or.space.prefix + "pages" bibinfo.check + * * + cap.status.std + } + if$ +} + + + +%% technical report number + +FUNCTION {format.tech.report.number} +{ number "number" bibinfo.check + type duplicate$ empty$ + { pop$ + this.to.prev.status + this.status.std + cap.status.std + bbl.techrep + } + { skip$ } + if$ + "type" bibinfo.check + swap$ duplicate$ empty$ + { pop$ } + { this.to.prev.status + this.status.std + cap.status.std + tie.or.space.prefix * * } + if$ +} + + + +%% note + +FUNCTION {format.note} +{ note empty$ + { "" } + { this.to.prev.status + this.status.std + punct.period 'this.status.punct := + note #1 #1 substring$ + duplicate$ "{" = + { skip$ } + { status.cap + { "u" } + { "l" } + if$ + change.case$ + } + if$ + note #2 global.max$ substring$ * "note" bibinfo.check + cap.yes 'status.cap := + } + if$ +} + + + +%% patent + +FUNCTION {format.patent.date} +{ this.to.prev.status + this.status.std + year empty$ + { monthfiled duplicate$ empty$ + { "monthfiled" bibinfo.check pop$ "" } + { "monthfiled" bibinfo.check } + if$ + dayfiled duplicate$ empty$ + { "dayfiled" bibinfo.check pop$ "" * } + { "dayfiled" bibinfo.check + monthfiled empty$ + { "dayfiled without a monthfiled in " cite$ * warning$ + * + } + { " " swap$ * * } + if$ + } + if$ + yearfiled empty$ + { "no year or yearfiled in " cite$ * warning$ } + { yearfiled "yearfiled" bibinfo.check + swap$ + duplicate$ empty$ + { pop$ } + { ", " * swap$ * } + if$ + } + if$ + } + { month duplicate$ empty$ + { "month" bibinfo.check pop$ "" } + { "month" bibinfo.check } + if$ + day duplicate$ empty$ + { "day" bibinfo.check pop$ "" * } + { "day" bibinfo.check + month empty$ + { "day without a month in " cite$ * warning$ + * + } + { " " swap$ * * } + if$ + } + if$ + year "year" bibinfo.check + swap$ + duplicate$ empty$ + { pop$ } + { ", " * swap$ * } + if$ + } + if$ + cap.status.std +} + +FUNCTION {format.patent.nationality.type.number} +{ this.to.prev.status + this.status.std + nationality duplicate$ empty$ + { "nationality" bibinfo.warn pop$ "" } + { "nationality" bibinfo.check + duplicate$ "l" change.case$ "united states" = + { pop$ bbl.patentUS } + { skip$ } + if$ + " " * + } + if$ + type empty$ + { bbl.patent "type" bibinfo.check } + { type "type" bibinfo.check } + if$ + * + number duplicate$ empty$ + { "number" bibinfo.warn pop$ } + { "number" bibinfo.check + large.number.separate + swap$ " " * swap$ * + } + if$ + cap.status.std +} + + + +%% standard + +FUNCTION {format.organization.institution.standard.type.number} +{ this.to.prev.status + this.status.std + organization duplicate$ empty$ + { pop$ + institution duplicate$ empty$ + { "institution" bibinfo.warn } + { "institution" bibinfo.warn " " * } + if$ + } + { "organization" bibinfo.warn " " * } + if$ + type empty$ + { bbl.standard "type" bibinfo.check } + { type "type" bibinfo.check } + if$ + * + number duplicate$ empty$ + { "number" bibinfo.check pop$ } + { "number" bibinfo.check + large.number.separate + swap$ " " * swap$ * + } + if$ + cap.status.std +} + +FUNCTION {format.revision} +{ revision empty$ + { "" } + { this.to.prev.status + this.status.std + bbl.revision + revision tie.or.space.prefix + "revision" bibinfo.check + * * + cap.status.std + } + if$ +} + + +%% thesis + +FUNCTION {format.master.thesis.type} +{ this.to.prev.status + this.status.std + type empty$ + { + bbl.mthesis + } + { + type "type" bibinfo.check + } + if$ +cap.status.std +} + +FUNCTION {format.phd.thesis.type} +{ this.to.prev.status + this.status.std + type empty$ + { + bbl.phdthesis + } + { + type "type" bibinfo.check + } + if$ +cap.status.std +} + + + +%% URL + +FUNCTION {format.url} +{ url empty$ + { "" } + { this.to.prev.status + this.status.std + cap.yes 'status.cap := + bbl.urlprefix " " * + "\url{" * url * "}" * + punct.no 'this.status.punct := + punct.period 'prev.status.punct := + space.normal 'this.status.space := + space.normal 'prev.status.space := + quote.no 'this.status.quote := + } + if$ +} + + + + +%%%%%%%%%%%%%%%%%%%% +%% ENTRY HANDLERS %% +%%%%%%%%%%%%%%%%%%%% + + +% Note: In many journals, IEEE (or the authors) tend not to show the number +% for articles, so the display of the number is controlled here by the +% switch "is.use.number.for.article" +FUNCTION {article} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors "author" output.warn + name.or.dash + format.article.title "title" output.warn + format.journal "journal" bibinfo.check "journal" output.warn + format.volume output + format.number.if.use.for.article output + format.pages output + format.date "year" output.warn + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {book} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + author empty$ + { format.editors "author and editor" output.warn } + { format.authors output.nonnull } + if$ + name.or.dash + format.book.title.edition output + format.series output + author empty$ + { skip$ } + { format.editors output } + if$ + format.address.publisher.date output + format.volume output + format.number output + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {booklet} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors output + name.or.dash + format.article.title "title" output.warn + format.howpublished "howpublished" bibinfo.check output + format.organization "organization" bibinfo.check output + format.address "address" bibinfo.check output + format.date output + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {electronic} +{ std.status.using.period + start.entry + if.url.alt.interword.spacing + format.authors output + name.or.dash + format.organization "organization" bibinfo.check output + format.article.title "title" output.warn + format.howpublished "howpublished" bibinfo.check output + format.address "address" bibinfo.check output + format.note output + format.date output + format.url output + fin.entry + empty.entry.warn + if.url.std.interword.spacing +} + +FUNCTION {inbook} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + author empty$ + { format.editors "author and editor" output.warn } + { format.authors output.nonnull } + if$ + name.or.dash + format.book.title.edition output + format.series output + format.address.publisher.date output + format.volume output + format.number output + format.chapter output + format.pages output + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {incollection} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors "author" output.warn + name.or.dash + format.article.title "title" output.warn + format.in.booktitle.edition "booktitle" output.warn + format.series output + format.editors output + format.address.publisher.date.nowarn output + format.volume output + format.number output + format.chapter output + format.pages output + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {inproceedings} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors "author" output.warn + name.or.dash + format.article.title "title" output.warn + format.in.booktitle "booktitle" output.warn + format.series output + format.editors output + format.volume output + format.number output + publisher empty$ + { format.address.organization.date output } + { format.organization "organization" bibinfo.check output + format.address.publisher.date output + } + if$ + format.paper output + format.pages output + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {manual} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors output + name.or.dash + format.book.title.edition "title" output.warn + format.howpublished "howpublished" bibinfo.check output + format.organization "organization" bibinfo.check output + format.address "address" bibinfo.check output + format.date output + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {mastersthesis} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors "author" output.warn + name.or.dash + format.article.title "title" output.warn + format.master.thesis.type output.nonnull + format.school "school" bibinfo.warn output + format.address "address" bibinfo.check output + format.date "year" output.warn + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {misc} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors output + name.or.dash + format.article.title output + format.howpublished "howpublished" bibinfo.check output + format.organization "organization" bibinfo.check output + format.address "address" bibinfo.check output + format.pages output + format.date output + format.note output + format.url output + fin.entry + empty.entry.warn + if.url.std.interword.spacing +} + +FUNCTION {patent} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors output + name.or.dash + format.article.title output + format.patent.nationality.type.number output + format.patent.date output + format.note output + format.url output + fin.entry + empty.entry.warn + if.url.std.interword.spacing +} + +FUNCTION {periodical} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.editors output + name.or.dash + format.book.title "title" output.warn + format.series output + format.volume output + format.number output + format.organization "organization" bibinfo.check output + format.date "year" output.warn + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {phdthesis} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors "author" output.warn + name.or.dash + format.article.title "title" output.warn + format.phd.thesis.type output.nonnull + format.school "school" bibinfo.warn output + format.address "address" bibinfo.check output + format.date "year" output.warn + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {proceedings} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.editors output + name.or.dash + format.book.title "title" output.warn + format.series output + format.volume output + format.number output + publisher empty$ + { format.address.organization.date output } + { format.organization "organization" bibinfo.check output + format.address.publisher.date output + } + if$ + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {standard} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors output + name.or.dash + format.book.title "title" output.warn + format.howpublished "howpublished" bibinfo.check output + format.organization.institution.standard.type.number output + format.revision output + format.date output + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {techreport} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors "author" output.warn + name.or.dash + format.article.title "title" output.warn + format.howpublished "howpublished" bibinfo.check output + format.institution "institution" bibinfo.warn output + format.address "address" bibinfo.check output + format.tech.report.number output.nonnull + format.date "year" output.warn + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {unpublished} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors "author" output.warn + name.or.dash + format.article.title "title" output.warn + format.date output + format.note "note" output.warn + format.url output + fin.entry + if.url.std.interword.spacing +} + + +% The special entry type which provides the user interface to the +% BST controls +FUNCTION {IEEEtranBSTCTL} +{ is.print.banners.to.terminal + { "** IEEEtran BST control entry " quote$ * cite$ * quote$ * " detected." * + top$ + } + { skip$ } + if$ + CTLuse_article_number + empty$ + { skip$ } + { CTLuse_article_number + yes.no.to.int + 'is.use.number.for.article := + } + if$ + CTLuse_paper + empty$ + { skip$ } + { CTLuse_paper + yes.no.to.int + 'is.use.paper := + } + if$ + CTLuse_forced_etal + empty$ + { skip$ } + { CTLuse_forced_etal + yes.no.to.int + 'is.forced.et.al := + } + if$ + CTLmax_names_forced_etal + empty$ + { skip$ } + { CTLmax_names_forced_etal + string.to.integer + 'max.num.names.before.forced.et.al := + } + if$ + CTLnames_show_etal + empty$ + { skip$ } + { CTLnames_show_etal + string.to.integer + 'num.names.shown.with.forced.et.al := + } + if$ + CTLuse_alt_spacing + empty$ + { skip$ } + { CTLuse_alt_spacing + yes.no.to.int + 'is.use.alt.interword.spacing := + } + if$ + CTLalt_stretch_factor + empty$ + { skip$ } + { CTLalt_stretch_factor + 'ALTinterwordstretchfactor := + "\renewcommand\BIBentryALTinterwordstretchfactor{" + ALTinterwordstretchfactor * "}" * + write$ newline$ + } + if$ + CTLdash_repeated_names + empty$ + { skip$ } + { CTLdash_repeated_names + yes.no.to.int + 'is.dash.repeated.names := + } + if$ + CTLname_format_string + empty$ + { skip$ } + { CTLname_format_string + 'name.format.string := + } + if$ + CTLname_latex_cmd + empty$ + { skip$ } + { CTLname_latex_cmd + 'name.latex.cmd := + } + if$ + + + num.names.shown.with.forced.et.al max.num.names.before.forced.et.al > + { "CTLnames_show_etal cannot be greater than CTLmax_names_forced_etal in " cite$ * warning$ + max.num.names.before.forced.et.al 'num.names.shown.with.forced.et.al := + } + { skip$ } + if$ +} + + +%%%%%%%%%%%%%%%%%%% +%% ENTRY ALIASES %% +%%%%%%%%%%%%%%%%%%% +FUNCTION {conference}{inproceedings} +FUNCTION {online}{electronic} +FUNCTION {internet}{electronic} +FUNCTION {webpage}{electronic} +FUNCTION {default.type}{misc} + + + +%%%%%%%%%%%%%%%%%% +%% MAIN PROGRAM %% +%%%%%%%%%%%%%%%%%% + +READ + +EXECUTE {initialize.controls} +EXECUTE {initialize.status.constants} +EXECUTE {banner.message} + +EXECUTE {initialize.longest.label} +ITERATE {longest.label.pass} + +EXECUTE {begin.bib} +ITERATE {call.type$} +EXECUTE {end.bib} + +EXECUTE{completed.message} + + +%% That's all folks, mds. \ No newline at end of file diff --git a/chap4.tex b/chap4.tex new file mode 100644 index 0000000..f5270f2 --- /dev/null +++ b/chap4.tex @@ -0,0 +1,33 @@ +\chapter{Cats} + +I do not usually talk about myself, but when I do, I talk about my cat.\\ + +In April 2010, the American economy was gripped by its most severe economic crisis in at least a generation. There was in a deep recession. It was in this climate that a great savior was born; her name is Muffins. + +\begin{figure}[ht!] +\centering +\includegraphics[width=90mm]{./images/muffins.jpg} +\caption{A Week Old Muffins} +\end{figure} + +She is the first cat I have ever owned. She is a purebred Siberian. Her interests include: \\ +\begin{itemize} + \item Sleeping + \item Grooming herself + \item Twister +\end{itemize} + +The reason I chose to get a Siberian cat is because they are purported (perhaps dubiously) to be hypoallergenic. They are also a very healthy breed as they were more recently domesticated.\ + +\section{Career Goals} + +I am impressed by the ground working done by the renowned dog rehabilitator Cesar Millan, host of the critically acclaimed television show "Dog Whisperer." It is my hope that I could have an equally successful television program which I will entail "Cat Telepathist" where I will rehabilitate troubled and stray cats through the power of extrasensory perception (ESP). + +If my "Cat Telepathist" show were not to find a niche with audiences, my second television show is modeled after the former television show "Crossing Over with John Edward." \cite{calderwood} I plan to call the show "You have Cat to be Kitten Me with Zayd Hammoudeh" and will be used to give grieving families the opportunity to communicate with their deceased feline family members. + +Other TV show ideas I would like to pursue include: +\begin{itemize} + \item Cat Mustache Aficionado - A daily discussion of cat whiskers. + \item Alien vs. Predator vs. Cat - It is like the movie "Alien vs. Predator" but instead of it being a two party battle, it is a triple threat match with a cat. + \item Cat Hoarders - A show where we do an intervention with a cat that hoards some type of item. +\end{itemize} \ No newline at end of file diff --git a/images/.DS_Store b/images/.DS_Store deleted file mode 100644 index 9b3c98c..0000000 Binary files a/images/.DS_Store and /dev/null differ diff --git a/images/muffins.jpg b/images/muffins.jpg new file mode 100644 index 0000000..0740c3f Binary files /dev/null and b/images/muffins.jpg differ diff --git a/references.bib b/references.bib new file mode 100644 index 0000000..a3d9ace --- /dev/null +++ b/references.bib @@ -0,0 +1,122 @@ +@misc{calderwood, + place={New York, New York}, + title={Crossing Over with John Edward}, + journal={Crossing Over with John Edward}, + publisher={Sci-Fi Channel}, + author={Calderwood, Dana}, + year={2000}, month={Jan} +} + +@Book{fitzpatrick2003cat, + author = {Fitzpatrick, Sonya}, + title = {Cat talk : the secrets of communicating with your cat}, + publisher = {Berkley Books}, + year = {2003}, + address = {New York}, + isbn = {0425194957} + } + +@Book{fitzpatrick_smith_1997, + place={New York}, + title={What the animals tell me: developing your innate telepathic skills to understand and communicate with your pets}, + publisher={Hyperion}, + author={Fitzpatrick, Sonya and Smith, Patricia Burkhart}, + year={1997} +} + +@misc{fitzpatrick_2013, + title={About Sonya Fitzpatrick}, + url={http://sonyafitzpatrick.com/about/}, + journal={Sonya Fitzpatrick}, publisher={Animals Are Forever LLC}, + author={Fitzpatrick, Sonya}, year={2013} +} + +@article{harden, + author = {Peter Adams}, + title = {A `murder code' broken}, + journal = {San Francisco Chronicle}, + year = {1969}, + month = {aug} +} + +@misc{bib1, + author = {National Institute of Science and Technology}, + title = {Announcing the Advanced Encryption Standard (AES)}, + howpublished = {\url{http://csrc.nist.gov/publications/fips/fips197/fips-197.pdf}}, + year = {2001}, + note = {(Accessed on 10/30/2005)} +} + +@mastersthesis{basa, + author = {P. K. Basavaraju}, + title = {Heuristic-search cryptanalysis of the Zodiac~340 cipher}, + school = {San Jose State University}, + year = 2009, +} + +@misc{bib3, + author = {K. Briggs}, + title = {English and Latin digram and trigram frequencies}, + howpublished = {\url{http://keithbriggs.info/documents/english_latin.pdf}}, + month = {}, + year = {2013}, + note = {(Accessed on 07/28/2014)} +} + +@misc{bib2, + author = {G. Claston}, + title = {340-cipher --- overview and examination}, + howpublished = {\url{http://www.zodiackiller.com/mba/zc/69.html}}, + month = {}, + year = {2008}, + note = {(Accessed on 12/21/2010)} +} + +@misc{glurk, + author = {Glurk}, + title = {The final~18 symbols are nothing but filler!}, + howpublished = {\url{http://www.zodiackillerfacts.com/forum/viewtopic.php?f=49&t=423}}, + month = {}, + year = {2005}, + note = {(Accessed on 05/01/2016)} +} + +@article{bib7, + author = {T. Jakobsen}, + title = {A fast method for the cryptanalysis of substitution ciphers}, + journal = {Cryptologia}, + year = {1995}, + pages = {265-274}, + volume = {19} +} + +@book{bib10, + author = {D. Kreher and D. Stinson}, + year = {1998}, + publisher = {CRC~Press}, + title = {Combinatorial Algorithms: Generation, Enumeration and Search} +} + +@article{bib11, + author = {G. Shanmugam and R. M. Low and M. Stamp}, + title = {Simple substitution distance and metamorphic detection}, + journal = {Journal of Computer Virology and Hacking Techniques}, + year = {2013}, + number = {3}, + pages = {159-170}, + volume = {9} +} + +@book{bibAC, + author = {M. Stamp and R. M. Low}, + year = {2006}, + publisher = {Wiley}, + title = {Applied Cryptanalysis: Breaking Ciphers in the Real World} +} + +@book{bib17, + author = {M. Stamp}, + year = {2011}, + title = {Information Security: Principles and Practice}, + publisher = {Wiley}, +} diff --git a/thesis.tex b/thesis.tex index bd248ca..1710139 100755 --- a/thesis.tex +++ b/thesis.tex @@ -9,15 +9,36 @@ \usepackage{amsmath,amsthm, amsfonts, amssymb, amsxtra,amsopn} \usepackage{graphicx} \usepackage{multirow} -\usepackage{algorithmic} \usepackage{longtable} \usepackage{booktabs} -\usepackage{listings} \usepackage{cmap} \PassOptionsToPackage{hyphens}{url} -\usepackage{hyperref} -\hypersetup{colorlinks=true,linkcolor=black,citecolor=black,urlcolor=black,filecolor=black} +\usepackage{xcolor, colortbl} % Used for coloring the cells of tables +\usepackage{amsmath} \usepackage[T1]{fontenc} +\usepackage{textcomp} % Required for upquote. +\usepackage{listings} % Used for printing source code in papers +\usepackage{microtype} +\usepackage{pgfplots} % Used to create graphs +\usepackage{makecell} % Used to create thick links in tables +\usepackage[shortcuts]{extdash} % Allow the use of unbreakable "extdash" spacers. + +% Do not add extra space around itemizes +\usepackage{enumitem} +\setlist[itemize]{noitemsep, topsep=0pt} + +\usepackage{algorithm} % Used for writing algorithms in a paper +\usepackage[noend]{algpseudocode} % Allows psuedocode keywords (e.g., "if", "while", "for", etc.) in algorithms. + + +\usepackage{mdframed} +\usepackage{array} % Needed for centering in the table +\usepackage[export]{adjustbox} % loads also graphicx +\usepackage{graphicx} + +\usepackage{hyperref} % Creates links in the PDF document. +\hypersetup{hidelinks} % Do not include boxes around links + \usepackage[tableposition=top]{caption} % Top=1.25 inches - 0.05 inches for the header. % @@ -26,12 +47,22 @@ \usepackage[vmargin={1.25in, 1.25in}, hmargin={1.5in, 1in}, textwidth=6in, textheight=5.25in]{geometry} +\usepackage{microtype} +\DisableLigatures{encoding = *, family = * } + +\newcommand{\numbwithdegreesymbol}[1]{#1$^\circ$} +\newcommand{\MiniAssembly}{M\hspace{-.08em}A} % no limit on percentage of floats per page \renewcommand{\floatpagefraction}{1.0} \renewcommand{\topfraction}{1.0} \renewcommand{\textfraction}{0.0} +% Prevent hyphenation in the TOC, List of Figures, and List of Tables +\makeatletter +\renewcommand{\@tocrmarg}{2.3em plus1fil} +\makeatother + % eref puts parenthesis around reference, like "equation (1)" \def\eref#1{(\ref{#1})} @@ -40,7 +71,6 @@ % %\def\projectType{Thesis} \def\projectType{Project} -% % ***** graduation month % \def\graduationMonth{May} @@ -52,12 +82,12 @@ % % ***** first committee member's name % -\def\firstCommitteeMember{Dr. Chris Pollett} +\def\firstCommitteeMember{Space Ghost} \def\firstCommitteeMemberAffiliation{Department of Computer Science} % % ***** second committee member's name % -\def\secondCommitteeMember{Fabio Di Troia} +\def\secondCommitteeMember{Count Dracula} \def\secondCommitteeMemberAffiliation{Department of Mathematics} \setcounter{secnumdepth}{3} @@ -67,12 +97,12 @@ % % ***** title % -\title{Firefox Add-on for Metamorphic JavaScript Malware Detection} +\title{Typesetting Your Report for Fun and Profit} % % ***** author's name % -\author{Sravan Kumar Reddy Javaji} +\author{Mark Stamp} % % ***** graduation year % @@ -95,7 +125,10 @@ % % ***** acknowledgements in file ack.tex % +% You can optionally have a dedication as well supported by the URI template. +% \acknowledgements{ack} +%\dedication{ack} \setlength{\parskip}{.1 in} %uncomment the following for single space drafts @@ -111,11 +144,16 @@ \newchapter{chap1} \newchapter{chap2} \newchapter{chap3} +\newchapter{chap4} % % ***** bibliography/references in file bib.tex % -\input bib.tex +%\input bib.tex +% Do not use bibtex if you plan to use references for the URI-derived thesis template. +% Instead, you should reference the file "uribibtex.bat" instead of the standard bibtex +\bibliographystyle{ieeetr} +\reffile{references} % To build the references, double click the file "genbib.bat" in the "build" subdirectory % % ***** appendices in appA.tex, appB.tex, ... diff --git a/uribibtex.bat b/uribibtex.bat new file mode 100644 index 0000000..ad08a90 --- /dev/null +++ b/uribibtex.bat @@ -0,0 +1,16 @@ +REM uribibtex.bat version 1.0 + +@ECHO OFF +IF /I [%1] == [thesis.aux] GOTO runmulti +IF /I [%1] == [thesis] GOTO runmulti +GOTO runnormal + +:runmulti +IF EXIST genbib.txt move /Y genbib.txt genbib.bat +IF EXIST genbib.bat (genbib.bat) ELSE (GOTO runnormal) +GOTO end + +:runnormal +bibtex build/%1 + +:end diff --git a/uriref.bst b/uriref.bst new file mode 100644 index 0000000..d0d4edd --- /dev/null +++ b/uriref.bst @@ -0,0 +1,2405 @@ +%% +%% uriref.bst +%% Version 1.2 (2006/06/19) +%% Created from IEEEtran.bst by Timothy Toolan +%% +%% Used to create the list of references, which is sorted in order of +%% citation, for theses and dissertations at the University of Rhode Island. +%% +%% This is used by urithesis.cls, and should be used with uribib.bst to +%% create the bibliography. +%% +%%********************************************************************** +%% +%% ChangeLog for uriref.bst: +%% +%% 1.0 (2004/10/28) +%% 1. Initial release based on IEEEtran.bst. +%% No functional changes from IEEEtran.bst. +%% +%% 1.1 (2005/07/12) +%% 1. Turned off the "dashification" of repeated (i.e., identical to +%% those of the previous entry) names. +%% +%% 1.2 (2006/06/19) +%% 1. Moved the \addcontentsline{toc} into the created .bbl file, +%% which is necessary to ensure correct page numbers. +%% +%%********************************************************************** +%% +%% IEEEtran.bst +%% BibTeX Bibliography Style file for IEEE Journals and Conferences (unsorted) +%% Version 1.11 (2003/04/02) +%% +%% Copyright (c) 2003 Michael Shell +%% +%% Original starting code base and algorithms obtained from the output of +%% Patrick W. Daly's makebst package as well as from prior versions of +%% IEEE BibTeX styles: +%% +%% 1. Howard Trickey and Oren Patashnik's ieeetr.bst (1985/1988) +%% 2. Silvano Balemi and Richard H. Roy's IEEEbib.bst (1993) +%% +%% +%% See: +%% http://www.ctan.org/tex-archive/macros/latex/contrib/supported/IEEEtran/ +%% for latest version and current contact information. +%% +%% For use with BibTeX version 0.99a or later +%% +%% This is a numerical citation style. +%% +%%********************************************************************** +%% Legal Notice: +%% This code is offered as-is without any warranty either expressed or +%% implied; without even the implied warranty of MERCHANTABILITY or +%% FITNESS FOR A PARTICULAR PURPOSE! +%% User assumes all risk. +%% In no event shall IEEE or any contributor to this code be liable for +%% any damages or losses, including, but not limited to, incidental, +%% consequential, or any other damages, resulting from the use or misuse +%% of any information contained here. +%% +%% This code is distributed under the Perl Artistic License +%% ( http://language.perl.com/misc/Artistic.html ) +%% and may be freely used, distributed and modified - subject to the +%% constraints therein. +%% Retain all contribution notices, credits and disclaimers. +%% +%% All comments are the opinions of their respective authors and are not +%% necessarily endorsed by the IEEE. +%%********************************************************************** +% +% +% Changelog: +% +% 1.00 (2002/08/13) Initial release +% +% 1.10 (2002/09/27) +% 1. Corrected minor bug for improperly formed warning message when a +% book was not given a title. Thanks to Ming Kin Lai for reporting this. +% 2. Added support for CTLname_format_string and CTLname_latex_cmd fields +% in the BST control entry type. +% +% 1.11 (2003/04/02) +% 1. Fixed bug with URLs containing underscores when using url.sty. Thanks +% to Ming Kin Lai for reporting this. + + + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% DEFAULTS FOR THE CONTROLS OF THE BST STYLE %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +% These are the defaults for the user adjustable controls. The values used +% here can be overridden by the user via IEEEtranBSTCTL entry type. + +% NOTE: The recommended LaTeX command to invoke a control entry type is: +% +%\makeatletter +%\def\bstctlcite#1{\@bsphack +% \@for\@citeb:=#1\do{% +% \edef\@citeb{\expandafter\@firstofone\@citeb}% +% \if@filesw\immediate\write\@auxout{\string\citation{\@citeb}}\fi}% +% \@esphack} +%\makeatother +% +% It is called at the start of the document, before the first \cite, like: +% \bstctlcite{IEEEexample:BSTcontrol} +% +% IEEEtran.cls V1.6 and later does provide this command. + + + +% #0 turns off the display of the number for articles. +% #1 enables +FUNCTION {default.is.use.number.for.article} { #1 } + + +% #0 turns off the display of the paper and type fields in @inproceedings. +% #1 enables +FUNCTION {default.is.use.paper} { #1 } + + +% #0 turns off the forced use of "et al." +% #1 enables +FUNCTION {default.is.forced.et.al} { #0 } + +% The maximum number of names that can be present beyond which an "et al." +% usage is forced. Be sure that num.names.shown.with.forced.et.al (below) +% is not greater than this value! +% Note: There are many instances of references in IEEE journals which have +% a very large number of authors as well as instances in which "et al." is +% used profusely. +FUNCTION {default.max.num.names.before.forced.et.al} { #10 } + +% The number of names that will be shown with a forced "et al.". +% Must be less than or equal to max.num.names.before.forced.et.al +FUNCTION {default.num.names.shown.with.forced.et.al} { #1 } + + +% #0 turns off the alternate interword spacing for entries with URLs. +% #1 enables +FUNCTION {default.is.use.alt.interword.spacing} { #1 } + +% If alternate interword spacing for entries with URLs is enabled, this is +% the interword spacing stretch factor that will be used. For example, the +% default "4" here means that the interword spacing in entries with URLs can +% stretch to four times normal. Does not have to be an integer. Note that +% the value specified here can be overridden by the user in their LaTeX +% code via a command such as: +% "\providecommand\BIBentryALTinterwordstretchfactor{1.5}" in addition to +% that via the IEEEtranBSTCTL entry type. +FUNCTION {default.ALTinterwordstretchfactor} { "4" } + + +% #0 turns off the "dashification" of repeated (i.e., identical to those +% of the previous entry) names. IEEE normally does this. +% #1 enables +FUNCTION {default.is.dash.repeated.names} { #0 } + + +% The default name format control string. +FUNCTION {default.name.format.string}{ "{f.~}{vv~}{ll}{, jj}" } + + +% The default LaTeX font command for the names. +FUNCTION {default.name.latex.cmd}{ "" } + + +% Other controls that cannot be accessed via IEEEtranBSTCTL entry type. + +% #0 turns off the terminal startup banner/completed message so as to +% operate more quietly. +% #1 enables +FUNCTION {is.print.banners.to.terminal} { #1 } + + + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% FILE VERSION AND BANNER %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +FUNCTION{bst.file.version} { "1.1" } +FUNCTION{bst.file.date} { "2005/07/12" } +FUNCTION{bst.file.website} { "http://www.ele.uri.edu/info/thesis/uritex/uriref.bst" } + +FUNCTION {banner.message} +{ is.print.banners.to.terminal + { " " + top$ + "-- University of Rhode Island references, version" " " * bst.file.version * + " (" * bst.file.date * ")" * "," * + top$ + "-- based on IEEEtran.bst version 1.11 (2003/04/02) by Michael Shell." + top$ + "-- " bst.file.website * + top$ + "-- See the manual " quote$ * "IEEEtran_bst_HOWTO.pdf" * quote$ * " for usage information," * + top$ + "-- available at http://www.ele.uri.edu/info/thesis/IEEEtran_bst_HOWTO.pdf" + top$ + } + { skip$ } + if$ +} + +FUNCTION {completed.message} +{ is.print.banners.to.terminal + { "" + top$ + "Done." + top$ + } + { skip$ } + if$ +} + + + + +%%%%%%%%%%%%%%%%%%%%%% +%% STRING CONSTANTS %% +%%%%%%%%%%%%%%%%%%%%%% + +FUNCTION {bbl.and}{ "and" } +FUNCTION {bbl.etal}{ "et~al." } +FUNCTION {bbl.editors}{ "eds." } +FUNCTION {bbl.editor}{ "ed." } +FUNCTION {bbl.edition}{ "ed." } +FUNCTION {bbl.volume}{ "vol." } +FUNCTION {bbl.of}{ "of" } +FUNCTION {bbl.number}{ "no." } +FUNCTION {bbl.in}{ "in" } +FUNCTION {bbl.pages}{ "pp." } +FUNCTION {bbl.page}{ "p." } +FUNCTION {bbl.chapter}{ "ch." } +FUNCTION {bbl.paper}{ "paper" } +FUNCTION {bbl.part}{ "pt." } +FUNCTION {bbl.patent}{ "Patent" } +FUNCTION {bbl.patentUS}{ "U.S." } +FUNCTION {bbl.revision}{ "Rev." } +FUNCTION {bbl.series}{ "ser." } +FUNCTION {bbl.standard}{ "Std." } +FUNCTION {bbl.techrep}{ "Tech. Rep." } +FUNCTION {bbl.mthesis}{ "Master's thesis" } +FUNCTION {bbl.phdthesis}{ "Ph.D. dissertation" } +FUNCTION {bbl.urlprefix}{ "[Online]. Available:" } +FUNCTION {bbl.st}{ "st" } +FUNCTION {bbl.nd}{ "nd" } +FUNCTION {bbl.rd}{ "rd" } +FUNCTION {bbl.th}{ "th" } + + +% This is the LaTeX spacer that is used when a larger than normal space +% is called for (such as just before the address:publisher). +FUNCTION {large.space} { "\hskip 1em plus 0.5em minus 0.4em\relax " } + +% The LaTeX code for dashes that are used to represent repeated names. +% Note: Some older IEEE journals used something like +% "\rule{0.275in}{0.5pt}\," which is fairly thick and runs right along +% the baseline. However, IEEE now uses a thinner, above baseline, +% six dash long sequence. +FUNCTION {repeated.name.dashes} { "------" } + + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% PREDEFINED STRING MACROS %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +MACRO {jan} {"Jan."} +MACRO {feb} {"Feb."} +MACRO {mar} {"Mar."} +MACRO {apr} {"Apr."} +MACRO {may} {"May"} +MACRO {jun} {"June"} +MACRO {jul} {"July"} +MACRO {aug} {"Aug."} +MACRO {sep} {"Sept."} +MACRO {oct} {"Oct."} +MACRO {nov} {"Nov."} +MACRO {dec} {"Dec."} + + + +%%%%%%%%%%%%%%%%%% +%% ENTRY FIELDS %% +%%%%%%%%%%%%%%%%%% + +ENTRY + { address + assignee + author + booktitle + chapter + day + dayfiled + edition + editor + howpublished + institution + intype + journal + key + language + month + monthfiled + nationality + note + number + organization + pages + paper + publisher + school + series + revision + title + type + url + volume + year + yearfiled + CTLuse_article_number + CTLuse_paper + CTLuse_forced_etal + CTLmax_names_forced_etal + CTLnames_show_etal + CTLuse_alt_spacing + CTLalt_stretch_factor + CTLdash_repeated_names + CTLname_format_string + CTLname_latex_cmd + } + {} + { label } + + + + +%%%%%%%%%%%%%%%%%%%%%%% +%% INTEGER VARIABLES %% +%%%%%%%%%%%%%%%%%%%%%%% + +INTEGERS { prev.status.punct this.status.punct punct.std + punct.no punct.comma punct.period + prev.status.space this.status.space space.std + space.no space.normal space.large + prev.status.quote this.status.quote quote.std + quote.no quote.close + prev.status.nline this.status.nline nline.std + nline.no nline.newblock + status.cap cap.std + cap.no cap.yes} + +INTEGERS { longest.label.width multiresult nameptr namesleft number.label numnames } + +INTEGERS { is.use.number.for.article + is.use.paper + is.forced.et.al + max.num.names.before.forced.et.al + num.names.shown.with.forced.et.al + is.use.alt.interword.spacing + is.dash.repeated.names} + + +%%%%%%%%%%%%%%%%%%%%%% +%% STRING VARIABLES %% +%%%%%%%%%%%%%%%%%%%%%% + +STRINGS { bibinfo + longest.label + oldname + s + t + ALTinterwordstretchfactor + name.format.string + name.latex.cmd} + + + + +%%%%%%%%%%%%%%%%%%%%%%%%% +%% LOW LEVEL FUNCTIONS %% +%%%%%%%%%%%%%%%%%%%%%%%%% + +FUNCTION {initialize.controls} +{ default.is.use.number.for.article 'is.use.number.for.article := + default.is.use.paper 'is.use.paper := + default.is.forced.et.al 'is.forced.et.al := + default.max.num.names.before.forced.et.al 'max.num.names.before.forced.et.al := + default.num.names.shown.with.forced.et.al 'num.names.shown.with.forced.et.al := + default.is.use.alt.interword.spacing 'is.use.alt.interword.spacing := + default.is.dash.repeated.names 'is.dash.repeated.names := + default.ALTinterwordstretchfactor 'ALTinterwordstretchfactor := + default.name.format.string 'name.format.string := + default.name.latex.cmd 'name.latex.cmd := +} + + +% This IEEEtran.bst features a very powerful and flexible mechanism for +% controlling the capitalization, punctuation, spacing, quotation, and +% newlines of the formatted entry fields. (Note: IEEEtran.bst does not need +% or use the newline/newblock feature, but it has been implemented for +% possible future use.) The output states of IEEEtran.bst consist of +% multiple independent attributes and, as such, can be thought of as being +% vectors, rather than the simple scalar values ("before.all", +% "mid.sentence", etc.) used in most other .bst files. +% +% The more flexible and complex design used here was motivated in part by +% IEEE's rather unusual bibliography style. For example, IEEE ends the +% previous field item with a period and large space prior to the publisher +% address; the @electronic entry types use periods as inter-item punctuation +% rather than the commas used by the other entry types; and URLs are never +% followed by periods even though they are the last item in the entry. +% Although it is possible to accommodate these features with the conventional +% output state system, the seemingly endless exceptions make for convoluted, +% unreliable and difficult to maintain code. +% +% IEEEtran.bst's output state system can be easily understood via a simple +% illustration of two most recently formatted entry fields (on the stack): +% +% CURRENT_ITEM +% "PREVIOUS_ITEM +% +% which, in this example, is to eventually appear in the bibliography as: +% +% "PREVIOUS_ITEM," CURRENT_ITEM +% +% It is the job of the output routine to take the previous item off of the +% stack (while leaving the current item at the top of the stack), apply its +% trailing punctuation (including closing quote marks) and spacing, and then +% to write the result to BibTeX's output buffer: +% +% "PREVIOUS_ITEM," +% +% Punctuation (and spacing) between items is often determined by both of the +% items rather than just the first one. The presence of quotation marks +% further complicates the situation because, in standard English, trailing +% punctuation marks are supposed to be contained within the quotes. +% +% IEEEtran.bst maintains two output state (aka "status") vectors which +% correspond to the previous and current (aka "this") items. Each vector +% consists of several independent attributes which track punctuation, +% spacing, quotation, and newlines. Capitalization status is handled by a +% separate scalar because the format routines, not the output routine, +% handle capitalization and, therefore, there is no need to maintain the +% capitalization attribute for both the "previous" and "this" items. +% +% When a format routine adds a new item, it copies the current output status +% vector to the previous output status vector and (usually) resets the +% current (this) output status vector to a "standard status" vector. Using a +% "standard status" vector in this way allows us to redefine what we mean by +% "standard status" at the start of each entry handler and reuse the same +% format routines under the various inter-item separation schemes. For +% example, the standard status vector for the @book entry type may use +% commas for item separators, while the @electronic type may use periods, +% yet both entry handlers exploit many of the exact same format routines. +% +% Because format routines have write access to the output status vector of +% the previous item, they can override the punctuation choices of the +% previous format routine! Therefore, it becomes trivial to implement rules +% such as "Always use a period and a large space before the publisher." By +% pushing the generation of the closing quote mark to the output routine, we +% avoid all the problems caused by having to close a quote before having all +% the information required to determine what the punctuation should be. +% +% The IEEEtran.bst output state system can easily be expanded if needed. +% For instance, it is easy to add a "space.tie" attribute value if the +% bibliography rules mandate that two items have to be joined with an +% unbreakable space. + +FUNCTION {initialize.status.constants} +{ #0 'punct.no := + #1 'punct.comma := + #2 'punct.period := + #0 'space.no := + #1 'space.normal := + #2 'space.large := + #0 'quote.no := + #1 'quote.close := + #0 'cap.no := + #1 'cap.yes := + #0 'nline.no := + #1 'nline.newblock := +} + +FUNCTION {std.status.using.comma} +{ punct.comma 'punct.std := + space.normal 'space.std := + quote.no 'quote.std := + nline.no 'nline.std := + cap.no 'cap.std := +} + +FUNCTION {std.status.using.period} +{ punct.period 'punct.std := + space.normal 'space.std := + quote.no 'quote.std := + nline.no 'nline.std := + cap.yes 'cap.std := +} + +FUNCTION {initialize.prev.this.status} +{ punct.no 'prev.status.punct := + space.no 'prev.status.space := + quote.no 'prev.status.quote := + nline.no 'prev.status.nline := + punct.no 'this.status.punct := + space.no 'this.status.space := + quote.no 'this.status.quote := + nline.no 'this.status.nline := + cap.yes 'status.cap := +} + +FUNCTION {this.status.std} +{ punct.std 'this.status.punct := + space.std 'this.status.space := + quote.std 'this.status.quote := + nline.std 'this.status.nline := +} + +FUNCTION {cap.status.std}{ cap.std 'status.cap := } + +FUNCTION {this.to.prev.status} +{ this.status.punct 'prev.status.punct := + this.status.space 'prev.status.space := + this.status.quote 'prev.status.quote := + this.status.nline 'prev.status.nline := +} + + +FUNCTION {not} +{ { #0 } + { #1 } + if$ +} + +FUNCTION {and} +{ { skip$ } + { pop$ #0 } + if$ +} + +FUNCTION {or} +{ { pop$ #1 } + { skip$ } + if$ +} + + +% convert the strings "yes" or "no" to #1 or #0 respectively +FUNCTION {yes.no.to.int} +{ "l" change.case$ duplicate$ + "yes" = + { pop$ #1 } + { duplicate$ "no" = + { pop$ #0 } + { "unknown boolean " quote$ * swap$ * quote$ * + " in " * cite$ * warning$ + #0 + } + if$ + } + if$ +} + + +% pushes true if the single char string on the stack is in the +% range of "0" to "9" +FUNCTION {is.num} +{ chr.to.int$ + duplicate$ "0" chr.to.int$ < not + swap$ "9" chr.to.int$ > not and +} + +% multiplies the integer on the stack by a factor of 10 +FUNCTION {bump.int.mag} +{ #0 'multiresult := + { duplicate$ #0 > } + { #1 - + multiresult #10 + + 'multiresult := + } + while$ +pop$ +multiresult +} + +% converts a single character string on the stack to an integer +FUNCTION {char.to.integer} +{ duplicate$ + is.num + { chr.to.int$ "0" chr.to.int$ - } + {"noninteger character " quote$ * swap$ * quote$ * + " in integer field of " * cite$ * warning$ + #0 + } + if$ +} + +% converts a string on the stack to an integer +FUNCTION {string.to.integer} +{ duplicate$ text.length$ 'namesleft := + #1 'nameptr := + #0 'numnames := + { nameptr namesleft > not } + { duplicate$ nameptr #1 substring$ + char.to.integer numnames bump.int.mag + + 'numnames := + nameptr #1 + + 'nameptr := + } + while$ +pop$ +numnames +} + + + + +% The output routines write out the *next* to the top (previous) item on the +% stack, adding punctuation and such as needed. Since IEEEtran.bst maintains +% the output status for the top two items on the stack, these output +% routines have to consider the previous output status (which corresponds to +% the item that is being output). Full independent control of punctuation, +% closing quote marks, spacing, and newblock is provided. +% +% "output.nonnull" does not check for the presence of a previous empty +% item. +% +% "output" does check for the presence of a previous empty item and will +% remove an empty item rather than outputing it. +% +% "output.warn" is like "output", but will issue a warning if it detects +% an empty item. + +FUNCTION {output.nonnull} +{ swap$ + prev.status.punct punct.comma = + { "," * } + { skip$ } + if$ + prev.status.punct punct.period = + { add.period$ } + { skip$ } + if$ + prev.status.quote quote.close = + { "''" * } + { skip$ } + if$ + prev.status.space space.normal = + { " " * } + { skip$ } + if$ + prev.status.space space.large = + { large.space * } + { skip$ } + if$ + write$ + prev.status.nline nline.newblock = + { newline$ "\newblock " write$ } + { skip$ } + if$ +} + +FUNCTION {output} +{ duplicate$ empty$ + 'pop$ + 'output.nonnull + if$ +} + +FUNCTION {output.warn} +{ 't := + duplicate$ empty$ + { pop$ "empty " t * " in " * cite$ * warning$ } + 'output.nonnull + if$ +} + +% "fin.entry" is the output routine that handles the last item of the entry +% (which will be on the top of the stack when "fin.entry" is called). + +FUNCTION {fin.entry} +{ this.status.punct punct.no = + { skip$ } + { add.period$ } + if$ + this.status.quote quote.close = + { "''" * } + { skip$ } + if$ +write$ +newline$ +} + + +FUNCTION {is.last.char.not.punct} +{ duplicate$ + "}" * add.period$ + #-1 #1 substring$ "." = +} + +FUNCTION {is.multiple.pages} +{ 't := + #0 'multiresult := + { multiresult not + t empty$ not + and + } + { t #1 #1 substring$ + duplicate$ "-" = + swap$ duplicate$ "," = + swap$ "+" = + or or + { #1 'multiresult := } + { t #2 global.max$ substring$ 't := } + if$ + } + while$ + multiresult +} + +FUNCTION {capitalize}{ "u" change.case$ "t" change.case$ } + +FUNCTION {emphasize} +{ duplicate$ empty$ + { pop$ "" } + { "\emph{" swap$ * "}" * } + if$ +} + +FUNCTION {do.name.latex.cmd} +{ name.latex.cmd + empty$ + { skip$ } + { name.latex.cmd "{" * swap$ * "}" * } + if$ +} + +% IEEEtran.bst uses its own \BIBforeignlanguage command which directly +% invokes the TeX hyphenation patterns without the need of the Babel +% package. Babel does a lot more than switch hyphenation patterns and +% its loading can cause unintended effects in many class files (such as +% IEEEtran.cls). +FUNCTION {select.language} +{ duplicate$ empty$ 'pop$ + { language empty$ 'skip$ + { "\BIBforeignlanguage{" language * "}{" * swap$ * "}" * } + if$ + } + if$ +} + +FUNCTION {tie.or.space.prefix} +{ duplicate$ text.length$ #3 < + { "~" } + { " " } + if$ + swap$ +} + +FUNCTION {get.bbl.editor} +{ editor num.names$ #1 > 'bbl.editors 'bbl.editor if$ } + +FUNCTION {space.word}{ " " swap$ * " " * } + + +% Field Conditioners, Converters, Checkers and External Interfaces + +FUNCTION {empty.field.to.null.string} +{ duplicate$ empty$ + { pop$ "" } + { skip$ } + if$ +} + +FUNCTION {either.or.check} +{ empty$ + { pop$ } + { "can't use both " swap$ * " fields in " * cite$ * warning$ } + if$ +} + +FUNCTION {empty.entry.warn} +{ author empty$ title empty$ howpublished empty$ + month empty$ year empty$ note empty$ url empty$ + and and and and and and + { "all relevant fields are empty in " cite$ * warning$ } + 'skip$ + if$ +} + + +% The bibinfo system provides a way for the electronic parsing/acquisition +% of a bibliography's contents as is done by ReVTeX. For example, a field +% could be entered into the bibliography as: +% \bibinfo{volume}{2} +% Only the "2" would show up in the document, but the LaTeX \bibinfo command +% could do additional things with the information. IEEEtran.bst does provide +% a \bibinfo command via "\providecommand{\bibinfo}[2]{#2}". However, it is +% currently not used as the bogus bibinfo functions defined here output the +% entry values directly without the \bibinfo wrapper. The bibinfo functions +% themselves (and the calls to them) are retained for possible future use. +% +% bibinfo.check avoids acting on missing fields while bibinfo.warn will +% issue a warning message if a missing field is detected. Prior to calling +% the bibinfo functions, the user should push the field value and then its +% name string, in that order. + +FUNCTION {bibinfo.check} +{ swap$ duplicate$ missing$ + { pop$ pop$ "" } + { duplicate$ empty$ + { swap$ pop$ } + { swap$ pop$ } + if$ + } + if$ +} + +FUNCTION {bibinfo.warn} +{ swap$ duplicate$ missing$ + { swap$ "missing " swap$ * " in " * cite$ * warning$ pop$ "" } + { duplicate$ empty$ + { swap$ "empty " swap$ * " in " * cite$ * warning$ } + { swap$ pop$ } + if$ + } + if$ +} + + +% IEEE separates large numbers with more than 4 digits into groups of +% three. IEEE uses a small space to separate these number groups. +% Typical applications include patent and page numbers. + +% number of consecutive digits required to trigger the group separation. +FUNCTION {large.number.trigger}{ #5 } + +% For numbers longer than the trigger, this is the blocksize of the groups. +% The blocksize must be less than the trigger threshold, and 2 * blocksize +% must be greater than the trigger threshold (can't do more than one +% separation on the initial trigger). +FUNCTION {large.number.blocksize}{ #3 } + +% What is actually inserted between the number groups. +FUNCTION {large.number.separator}{ "\," } + +% So as to save on integer variables by reusing existing ones, numnames +% holds the current number of consecutive digits read and nameptr holds +% the number that will trigger an inserted space. +FUNCTION {large.number.separate} +{ 't := + "" + #0 'numnames := + large.number.trigger 'nameptr := + { t empty$ not } + { t #-1 #1 substring$ is.num + { numnames #1 + 'numnames := } + { #0 'numnames := + large.number.trigger 'nameptr := + } + if$ + t #-1 #1 substring$ swap$ * + t #-2 global.max$ substring$ 't := + numnames nameptr = + { duplicate$ #1 nameptr large.number.blocksize - substring$ swap$ + nameptr large.number.blocksize - #1 + global.max$ substring$ + large.number.separator swap$ * * + nameptr large.number.blocksize - 'numnames := + large.number.blocksize #1 + 'nameptr := + } + { skip$ } + if$ + } + while$ +} + +% Converts all single dashes "-" to double dashes "--". +FUNCTION {n.dashify} +{ large.number.separate + 't := + "" + { t empty$ not } + { t #1 #1 substring$ "-" = + { t #1 #2 substring$ "--" = not + { "--" * + t #2 global.max$ substring$ 't := + } + { { t #1 #1 substring$ "-" = } + { "-" * + t #2 global.max$ substring$ 't := + } + while$ + } + if$ + } + { t #1 #1 substring$ * + t #2 global.max$ substring$ 't := + } + if$ + } + while$ +} + + +% This function detects entries with names that are identical to that of +% the previous entry and replaces the repeated names with dashes (if the +% "is.dash.repeated.names" user control is nonzero). +FUNCTION {name.or.dash} +{ 's := + oldname empty$ + { s 'oldname := s } + { s oldname = + { is.dash.repeated.names + { repeated.name.dashes } + { s 'oldname := s } + if$ + } + { s 'oldname := s } + if$ + } + if$ +} + +% Converts the number string on the top of the stack to +% "numerical ordinal form" (e.g., "7" to "7th"). There is +% no artificial limit to the upper bound of the numbers as the +% least significant digit always determines the ordinal form. +FUNCTION {num.to.ordinal} +{ duplicate$ #-1 #1 substring$ "1" = + { bbl.st * } + { duplicate$ #-1 #1 substring$ "2" = + { bbl.nd * } + { duplicate$ #-1 #1 substring$ "3" = + { bbl.rd * } + { bbl.th * } + if$ + } + if$ + } + if$ +} + +% If the string on the top of the stack begins with a number, +% (e.g., 11th) then replace the string with the leading number +% it contains. Otherwise retain the string as-is. s holds the +% extracted number, t holds the part of the string that remains +% to be scanned. +FUNCTION {extract.num} +{ duplicate$ 't := + "" 's := + { t empty$ not } + { t #1 #1 substring$ + t #2 global.max$ substring$ 't := + duplicate$ is.num + { s swap$ * 's := } + { pop$ "" 't := } + if$ + } + while$ + s empty$ + 'skip$ + { pop$ s } + if$ +} + +% Converts the word number string on the top of the stack to +% Arabic string form. Will be successful up to "tenth". +FUNCTION {word.to.num} +{ duplicate$ "l" change.case$ 's := + s "first" = + { pop$ "1" } + { skip$ } + if$ + s "second" = + { pop$ "2" } + { skip$ } + if$ + s "third" = + { pop$ "3" } + { skip$ } + if$ + s "fourth" = + { pop$ "4" } + { skip$ } + if$ + s "fifth" = + { pop$ "5" } + { skip$ } + if$ + s "sixth" = + { pop$ "6" } + { skip$ } + if$ + s "seventh" = + { pop$ "7" } + { skip$ } + if$ + s "eighth" = + { pop$ "8" } + { skip$ } + if$ + s "ninth" = + { pop$ "9" } + { skip$ } + if$ + s "tenth" = + { pop$ "10" } + { skip$ } + if$ +} + + +% Converts the string on the top of the stack to numerical +% ordinal (e.g., "11th") form. +FUNCTION {convert.edition} +{ duplicate$ empty$ 'skip$ + { duplicate$ #1 #1 substring$ is.num + { extract.num + num.to.ordinal + } + { word.to.num + duplicate$ #1 #1 substring$ is.num + { num.to.ordinal } + { "edition ordinal word " quote$ * edition * quote$ * + " may be too high (or improper) for conversion" * " in " * cite$ * warning$ + } + if$ + } + if$ + } + if$ +} + + + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% LATEX BIBLIOGRAPHY CODE %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +FUNCTION {start.entry} +{ newline$ + "\bibitem{" write$ + cite$ write$ + "}" write$ + newline$ + "" + initialize.prev.this.status +} + +% Here we write out all the LaTeX code that we will need. The most involved +% code sequences are those that control the alternate interword spacing and +% foreign language hyphenation patterns. The heavy use of \providecommand +% gives users a way to override the defaults. Special thanks to Javier Bezos, +% Johannes Braams, Robin Fairburns, Heiko Oberdiek, Donald Arseneau and all +% the other gurus on comp.text.tex for their help and advice on the topic of +% \selectlanguage, Babel and BibTeX. +FUNCTION {begin.bib} +{ preamble$ empty$ 'skip$ + { preamble$ write$ newline$ } + if$ + "\begin{thebibliography}{" longest.label * "}" * + write$ newline$ + "\providecommand{\url}[1]{#1}" + write$ newline$ + "\addcustomcontentsline" + write$ newline$ + "\csname url@rmstyle\endcsname" + write$ newline$ + "\providecommand{\newblock}{\relax}" + write$ newline$ + "\providecommand{\bibinfo}[2]{#2}" + write$ newline$ + "\providecommand\BIBentrySTDinterwordspacing{\spaceskip=0pt\relax}" + write$ newline$ + "\providecommand\BIBentryALTinterwordstretchfactor{" + ALTinterwordstretchfactor * "}" * + write$ newline$ + "\providecommand\BIBentryALTinterwordspacing{\spaceskip=\fontdimen2\font plus " + write$ newline$ + "\BIBentryALTinterwordstretchfactor\fontdimen3\font minus \fontdimen4\font\relax}" + write$ newline$ + "\providecommand\BIBforeignlanguage[2]{{%" + write$ newline$ + "\expandafter\ifx\csname l@#1\endcsname\relax" + write$ newline$ + "\typeout{** WARNING: IEEEtran.bst: No hyphenation pattern has been}%" + write$ newline$ + "\typeout{** loaded for the language `#1'. Using the pattern for}%" + write$ newline$ + "\typeout{** the default language instead.}%" + write$ newline$ + "\else" + write$ newline$ + "\language=\csname l@#1\endcsname" + write$ newline$ + "\fi" + write$ newline$ + "#2}}" + write$ newline$ +} + +FUNCTION {end.bib} +{ newline$ "\end{thebibliography}" write$ newline$ } + +FUNCTION {if.url.alt.interword.spacing} +{ is.use.alt.interword.spacing + {url empty$ 'skip$ {"\BIBentryALTinterwordspacing" write$ newline$} if$} + { skip$ } + if$ +} + +FUNCTION {if.url.std.interword.spacing} +{ is.use.alt.interword.spacing + {url empty$ 'skip$ {"\BIBentrySTDinterwordspacing" write$ newline$} if$} + { skip$ } + if$ +} + + + + +%%%%%%%%%%%%%%%%%%%%%%%% +%% LONGEST LABEL PASS %% +%%%%%%%%%%%%%%%%%%%%%%%% + +FUNCTION {initialize.longest.label} +{ "" 'longest.label := + #1 'number.label := + #0 'longest.label.width := +} + +FUNCTION {longest.label.pass} +{ number.label int.to.str$ 'label := + number.label #1 + 'number.label := + label width$ longest.label.width > + { label 'longest.label := + label width$ 'longest.label.width := + } + 'skip$ + if$ +} + + + + +%%%%%%%%%%%%%%%%%%%%% +%% FORMAT HANDLERS %% +%%%%%%%%%%%%%%%%%%%%% + +%% Lower Level Formats (used by higher level formats) + +FUNCTION {format.address.org.or.pub.date} +{ 't := + "" + year empty$ + { "empty year in " cite$ * warning$ } + { skip$ } + if$ + address empty$ t empty$ and + year empty$ and month empty$ and + { skip$ } + { this.to.prev.status + this.status.std + cap.status.std + address "address" bibinfo.check * + t empty$ + { skip$ } + { punct.period 'prev.status.punct := + space.large 'prev.status.space := + address empty$ + { skip$ } + { ": " * } + if$ + t * + } + if$ + year empty$ month empty$ and + { skip$ } + { t empty$ address empty$ and + { skip$ } + { ", " * } + if$ + month empty$ + { year empty$ + { skip$ } + { year "year" bibinfo.check * } + if$ + } + { month "month" bibinfo.check * + year empty$ + { skip$ } + { " " * year "year" bibinfo.check * } + if$ + } + if$ + } + if$ + } + if$ +} + + +FUNCTION {format.names} +{ 'bibinfo := + duplicate$ empty$ 'skip$ { + this.to.prev.status + this.status.std + 's := + "" 't := + #1 'nameptr := + s num.names$ 'numnames := + numnames 'namesleft := + { namesleft #0 > } + { s nameptr + name.format.string + format.name$ + bibinfo bibinfo.check + 't := + nameptr #1 > + { nameptr num.names.shown.with.forced.et.al #1 + = + numnames max.num.names.before.forced.et.al > + is.forced.et.al and and + { "others" 't := + #1 'namesleft := + } + { skip$ } + if$ + namesleft #1 > + { ", " * t do.name.latex.cmd * } + { + numnames #2 > + { "," * } + 'skip$ + if$ + s nameptr "{ll}" format.name$ duplicate$ "others" = + { 't := } + { pop$ } + if$ + t "others" = + { + " " * bbl.etal emphasize * + } + { + bbl.and + space.word * t do.name.latex.cmd * + } + if$ + } + if$ + } + { t do.name.latex.cmd } + if$ + nameptr #1 + 'nameptr := + namesleft #1 - 'namesleft := + } + while$ + cap.status.std + } if$ +} + + + + +%% Higher Level Formats + +%% addresses/locations + +FUNCTION {format.address} +{ address duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + } + if$ +} + + + +%% author/editor names + +FUNCTION {format.authors}{ author "author" format.names } + +FUNCTION {format.editors} +{ editor "editor" format.names duplicate$ empty$ 'skip$ + { ", " * + get.bbl.editor + capitalize + * + } + if$ +} + + + +%% date + +FUNCTION {format.date} +{ + month "month" bibinfo.check duplicate$ empty$ + year "year" bibinfo.check duplicate$ empty$ + { swap$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + "there's a month but no year in " cite$ * warning$ } + if$ + * + } + { this.to.prev.status + this.status.std + cap.status.std + swap$ 'skip$ + { + swap$ + " " * swap$ + } + if$ + * + } + if$ +} + +FUNCTION {format.date.electronic} +{ month "month" bibinfo.check duplicate$ empty$ + year "year" bibinfo.check duplicate$ empty$ + { swap$ + { pop$ } + { "there's a month but no year in " cite$ * warning$ + pop$ ")" * "(" swap$ * + this.to.prev.status + punct.no 'this.status.punct := + space.normal 'this.status.space := + quote.no 'this.status.quote := + cap.yes 'status.cap := + } + if$ + } + { swap$ + { swap$ pop$ ")" * "(" swap$ * } + { "(" swap$ * ", " * swap$ * ")" * } + if$ + this.to.prev.status + punct.no 'this.status.punct := + space.normal 'this.status.space := + quote.no 'this.status.quote := + cap.yes 'status.cap := + } + if$ +} + + + +%% edition/title + +% Note: IEEE considers the edition to be closely associated with +% the title of a book. So, in IEEEtran.bst the edition is normally handled +% within the formatting of the title. The format.edition function is +% retained here for possible future use. +FUNCTION {format.edition} +{ edition duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + convert.edition + status.cap + { "t" } + { "l" } + if$ change.case$ + "edition" bibinfo.check + "~" * bbl.edition * + cap.status.std + } + if$ +} + +% This is used to format the booktitle of a conference proceedings. +% Here we use the "intype" field to provide the user a way to +% override the word "in" (e.g., with things like "presented at") +% Use of intype stops the emphasis of the booktitle to indicate that +% we no longer mean the written conference proceedings, but the +% conference itself. +FUNCTION {format.in.booktitle} +{ booktitle "booktitle" bibinfo.check duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + select.language + intype missing$ + { emphasize + bbl.in " " * + } + { intype " " * } + if$ + swap$ * + cap.status.std + } + if$ +} + +% This is used to format the booktitle of collection. +% Here the "intype" field is not supported, but "edition" is. +FUNCTION {format.in.booktitle.edition} +{ booktitle "booktitle" bibinfo.check duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + select.language + emphasize + edition empty$ 'skip$ + { ", " * + edition + convert.edition + "l" change.case$ + * "~" * bbl.edition * + } + if$ + bbl.in " " * swap$ * + cap.status.std + } + if$ +} + +FUNCTION {format.article.title} +{ title duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + "t" change.case$ + } + if$ + "title" bibinfo.check + duplicate$ empty$ 'skip$ + { quote.close 'this.status.quote := + is.last.char.not.punct + { punct.std 'this.status.punct := } + { punct.no 'this.status.punct := } + if$ + select.language + "``" swap$ * + cap.status.std + } + if$ +} + +FUNCTION {format.article.title.electronic} +{ title duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + "t" change.case$ + } + if$ + "title" bibinfo.check + duplicate$ empty$ + { skip$ } + { select.language } + if$ +} + +FUNCTION {format.book.title.edition} +{ title "title" bibinfo.check + duplicate$ empty$ + { "empty title in " cite$ * warning$ } + { this.to.prev.status + this.status.std + select.language + emphasize + edition empty$ 'skip$ + { ", " * + edition + convert.edition + status.cap + { "t" } + { "l" } + if$ + change.case$ + * "~" * bbl.edition * + } + if$ + cap.status.std + } + if$ +} + +FUNCTION {format.book.title} +{ title "title" bibinfo.check + duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + select.language + emphasize + } + if$ +} + + + +%% journal + +FUNCTION {format.journal} +{ journal duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + select.language + emphasize + } + if$ +} + + + +%% how published + +FUNCTION {format.howpublished} +{ howpublished duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + } + if$ +} + + + +%% institutions/organization/publishers/school + +FUNCTION {format.institution} +{ institution duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + } + if$ +} + +FUNCTION {format.organization} +{ organization duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + } + if$ +} + +FUNCTION {format.address.publisher.date} +{ publisher "publisher" bibinfo.warn format.address.org.or.pub.date } + +FUNCTION {format.address.publisher.date.nowarn} +{ publisher "publisher" bibinfo.check format.address.org.or.pub.date } + +FUNCTION {format.address.organization.date} +{ organization "organization" bibinfo.check format.address.org.or.pub.date } + +FUNCTION {format.school} +{ school duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + cap.status.std + } + if$ +} + + + +%% volume/number/series/chapter/pages + +FUNCTION {format.volume} +{ volume empty.field.to.null.string + duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + bbl.volume + status.cap + { capitalize } + { skip$ } + if$ + swap$ tie.or.space.prefix + "volume" bibinfo.check + * * + cap.status.std + } + if$ +} + +FUNCTION {format.number} +{ number empty.field.to.null.string + duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + status.cap + { bbl.number capitalize } + { bbl.number } + if$ + swap$ tie.or.space.prefix + "number" bibinfo.check + * * + cap.status.std + } + if$ +} + +FUNCTION {format.number.if.use.for.article} +{ is.use.number.for.article + { format.number } + { "" } + if$ +} + +% IEEE does not seem to tie the series so closely with the volume +% and number as is done in other bibliography styles. Instead the +% series is treated somewhat like an extension of the title. +FUNCTION {format.series} +{ series empty$ + { "" } + { this.to.prev.status + this.status.std + bbl.series " " * + series "series" bibinfo.check * + cap.status.std + } + if$ +} + + +FUNCTION {format.chapter} +{ chapter empty$ + { "" } + { this.to.prev.status + this.status.std + type empty$ + { bbl.chapter } + { type "l" change.case$ + "type" bibinfo.check + } + if$ + chapter tie.or.space.prefix + "chapter" bibinfo.check + * * + cap.status.std + } + if$ +} + + +% The intended use of format.paper is for paper numbers of inproceedings. +% The paper type can be overridden via the type field. +% We allow the type to be displayed even if the paper number is absent +% for things like "postdeadline paper" +FUNCTION {format.paper} +{ is.use.paper + { paper empty$ + { type empty$ + { "" } + { this.to.prev.status + this.status.std + type "type" bibinfo.check + cap.status.std + } + if$ + } + { this.to.prev.status + this.status.std + type empty$ + { bbl.paper } + { type "type" bibinfo.check } + if$ + " " * paper + "paper" bibinfo.check + * + cap.status.std + } + if$ + } + { "" } + if$ +} + + +FUNCTION {format.pages} +{ pages duplicate$ empty$ 'skip$ + { this.to.prev.status + this.status.std + duplicate$ is.multiple.pages + { + bbl.pages swap$ + n.dashify + } + { + bbl.page swap$ + } + if$ + tie.or.space.prefix + "pages" bibinfo.check + * * + cap.status.std + } + if$ +} + + + +%% technical report number + +FUNCTION {format.tech.report.number} +{ number "number" bibinfo.check + type duplicate$ empty$ + { pop$ + this.to.prev.status + this.status.std + cap.status.std + bbl.techrep + } + { skip$ } + if$ + "type" bibinfo.check + swap$ duplicate$ empty$ + { pop$ } + { this.to.prev.status + this.status.std + cap.status.std + tie.or.space.prefix * * } + if$ +} + + + +%% note + +FUNCTION {format.note} +{ note empty$ + { "" } + { this.to.prev.status + this.status.std + punct.period 'this.status.punct := + note #1 #1 substring$ + duplicate$ "{" = + { skip$ } + { status.cap + { "u" } + { "l" } + if$ + change.case$ + } + if$ + note #2 global.max$ substring$ * "note" bibinfo.check + cap.yes 'status.cap := + } + if$ +} + + + +%% patent + +FUNCTION {format.patent.date} +{ this.to.prev.status + this.status.std + year empty$ + { monthfiled duplicate$ empty$ + { "monthfiled" bibinfo.check pop$ "" } + { "monthfiled" bibinfo.check } + if$ + dayfiled duplicate$ empty$ + { "dayfiled" bibinfo.check pop$ "" * } + { "dayfiled" bibinfo.check + monthfiled empty$ + { "dayfiled without a monthfiled in " cite$ * warning$ + * + } + { " " swap$ * * } + if$ + } + if$ + yearfiled empty$ + { "no year or yearfiled in " cite$ * warning$ } + { yearfiled "yearfiled" bibinfo.check + swap$ + duplicate$ empty$ + { pop$ } + { ", " * swap$ * } + if$ + } + if$ + } + { month duplicate$ empty$ + { "month" bibinfo.check pop$ "" } + { "month" bibinfo.check } + if$ + day duplicate$ empty$ + { "day" bibinfo.check pop$ "" * } + { "day" bibinfo.check + month empty$ + { "day without a month in " cite$ * warning$ + * + } + { " " swap$ * * } + if$ + } + if$ + year "year" bibinfo.check + swap$ + duplicate$ empty$ + { pop$ } + { ", " * swap$ * } + if$ + } + if$ + cap.status.std +} + +FUNCTION {format.patent.nationality.type.number} +{ this.to.prev.status + this.status.std + nationality duplicate$ empty$ + { "nationality" bibinfo.warn pop$ "" } + { "nationality" bibinfo.check + duplicate$ "l" change.case$ "united states" = + { pop$ bbl.patentUS } + { skip$ } + if$ + " " * + } + if$ + type empty$ + { bbl.patent "type" bibinfo.check } + { type "type" bibinfo.check } + if$ + * + number duplicate$ empty$ + { "number" bibinfo.warn pop$ } + { "number" bibinfo.check + large.number.separate + swap$ " " * swap$ * + } + if$ + cap.status.std +} + + + +%% standard + +FUNCTION {format.organization.institution.standard.type.number} +{ this.to.prev.status + this.status.std + organization duplicate$ empty$ + { pop$ + institution duplicate$ empty$ + { "institution" bibinfo.warn } + { "institution" bibinfo.warn " " * } + if$ + } + { "organization" bibinfo.warn " " * } + if$ + type empty$ + { bbl.standard "type" bibinfo.check } + { type "type" bibinfo.check } + if$ + * + number duplicate$ empty$ + { "number" bibinfo.check pop$ } + { "number" bibinfo.check + large.number.separate + swap$ " " * swap$ * + } + if$ + cap.status.std +} + +FUNCTION {format.revision} +{ revision empty$ + { "" } + { this.to.prev.status + this.status.std + bbl.revision + revision tie.or.space.prefix + "revision" bibinfo.check + * * + cap.status.std + } + if$ +} + + +%% thesis + +FUNCTION {format.master.thesis.type} +{ this.to.prev.status + this.status.std + type empty$ + { + bbl.mthesis + } + { + type "type" bibinfo.check + } + if$ +cap.status.std +} + +FUNCTION {format.phd.thesis.type} +{ this.to.prev.status + this.status.std + type empty$ + { + bbl.phdthesis + } + { + type "type" bibinfo.check + } + if$ +cap.status.std +} + + + +%% URL + +FUNCTION {format.url} +{ url empty$ + { "" } + { this.to.prev.status + this.status.std + cap.yes 'status.cap := + bbl.urlprefix " " * + "\url{" * url * "}" * + punct.no 'this.status.punct := + punct.period 'prev.status.punct := + space.normal 'this.status.space := + space.normal 'prev.status.space := + quote.no 'this.status.quote := + } + if$ +} + + + + +%%%%%%%%%%%%%%%%%%%% +%% ENTRY HANDLERS %% +%%%%%%%%%%%%%%%%%%%% + + +% Note: In many journals, IEEE (or the authors) tend not to show the number +% for articles, so the display of the number is controlled here by the +% switch "is.use.number.for.article" +FUNCTION {article} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors "author" output.warn + name.or.dash + format.article.title "title" output.warn + format.journal "journal" bibinfo.check "journal" output.warn + format.volume output + format.number.if.use.for.article output + format.pages output + format.date "year" output.warn + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {book} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + author empty$ + { format.editors "author and editor" output.warn } + { format.authors output.nonnull } + if$ + name.or.dash + format.book.title.edition output + format.series output + author empty$ + { skip$ } + { format.editors output } + if$ + format.address.publisher.date output + format.volume output + format.number output + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {booklet} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors output + name.or.dash + format.article.title "title" output.warn + format.howpublished "howpublished" bibinfo.check output + format.organization "organization" bibinfo.check output + format.address "address" bibinfo.check output + format.date output + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {electronic} +{ std.status.using.period + start.entry + if.url.alt.interword.spacing + format.authors output + name.or.dash + format.organization "organization" bibinfo.check output + format.article.title "title" output.warn + format.howpublished "howpublished" bibinfo.check output + format.address "address" bibinfo.check output + format.note output + format.date output + format.url output + fin.entry + empty.entry.warn + if.url.std.interword.spacing +} + +FUNCTION {inbook} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + author empty$ + { format.editors "author and editor" output.warn } + { format.authors output.nonnull } + if$ + name.or.dash + format.book.title.edition output + format.series output + format.address.publisher.date output + format.volume output + format.number output + format.chapter output + format.pages output + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {incollection} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors "author" output.warn + name.or.dash + format.article.title "title" output.warn + format.in.booktitle.edition "booktitle" output.warn + format.series output + format.editors output + format.address.publisher.date.nowarn output + format.volume output + format.number output + format.chapter output + format.pages output + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {inproceedings} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors "author" output.warn + name.or.dash + format.article.title "title" output.warn + format.in.booktitle "booktitle" output.warn + format.series output + format.editors output + format.volume output + format.number output + publisher empty$ + { format.address.organization.date output } + { format.organization "organization" bibinfo.check output + format.address.publisher.date output + } + if$ + format.paper output + format.pages output + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {manual} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors output + name.or.dash + format.book.title.edition "title" output.warn + format.howpublished "howpublished" bibinfo.check output + format.organization "organization" bibinfo.check output + format.address "address" bibinfo.check output + format.date output + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {mastersthesis} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors "author" output.warn + name.or.dash + format.article.title "title" output.warn + format.master.thesis.type output.nonnull + format.school "school" bibinfo.warn output + format.address "address" bibinfo.check output + format.date "year" output.warn + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {misc} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors output + name.or.dash + format.article.title output + format.howpublished "howpublished" bibinfo.check output + format.organization "organization" bibinfo.check output + format.address "address" bibinfo.check output + format.pages output + format.date output + format.note output + format.url output + fin.entry + empty.entry.warn + if.url.std.interword.spacing +} + +FUNCTION {patent} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors output + name.or.dash + format.article.title output + format.patent.nationality.type.number output + format.patent.date output + format.note output + format.url output + fin.entry + empty.entry.warn + if.url.std.interword.spacing +} + +FUNCTION {periodical} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.editors output + name.or.dash + format.book.title "title" output.warn + format.series output + format.volume output + format.number output + format.organization "organization" bibinfo.check output + format.date "year" output.warn + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {phdthesis} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors "author" output.warn + name.or.dash + format.article.title "title" output.warn + format.phd.thesis.type output.nonnull + format.school "school" bibinfo.warn output + format.address "address" bibinfo.check output + format.date "year" output.warn + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {proceedings} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.editors output + name.or.dash + format.book.title "title" output.warn + format.series output + format.volume output + format.number output + publisher empty$ + { format.address.organization.date output } + { format.organization "organization" bibinfo.check output + format.address.publisher.date output + } + if$ + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {standard} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors output + name.or.dash + format.book.title "title" output.warn + format.howpublished "howpublished" bibinfo.check output + format.organization.institution.standard.type.number output + format.revision output + format.date output + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {techreport} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors "author" output.warn + name.or.dash + format.article.title "title" output.warn + format.howpublished "howpublished" bibinfo.check output + format.institution "institution" bibinfo.warn output + format.address "address" bibinfo.check output + format.tech.report.number output.nonnull + format.date "year" output.warn + format.note output + format.url output + fin.entry + if.url.std.interword.spacing +} + +FUNCTION {unpublished} +{ std.status.using.comma + start.entry + if.url.alt.interword.spacing + format.authors "author" output.warn + name.or.dash + format.article.title "title" output.warn + format.date output + format.note "note" output.warn + format.url output + fin.entry + if.url.std.interword.spacing +} + + +% The special entry type which provides the user interface to the +% BST controls +FUNCTION {IEEEtranBSTCTL} +{ is.print.banners.to.terminal + { "** IEEEtran BST control entry " quote$ * cite$ * quote$ * " detected." * + top$ + } + { skip$ } + if$ + CTLuse_article_number + empty$ + { skip$ } + { CTLuse_article_number + yes.no.to.int + 'is.use.number.for.article := + } + if$ + CTLuse_paper + empty$ + { skip$ } + { CTLuse_paper + yes.no.to.int + 'is.use.paper := + } + if$ + CTLuse_forced_etal + empty$ + { skip$ } + { CTLuse_forced_etal + yes.no.to.int + 'is.forced.et.al := + } + if$ + CTLmax_names_forced_etal + empty$ + { skip$ } + { CTLmax_names_forced_etal + string.to.integer + 'max.num.names.before.forced.et.al := + } + if$ + CTLnames_show_etal + empty$ + { skip$ } + { CTLnames_show_etal + string.to.integer + 'num.names.shown.with.forced.et.al := + } + if$ + CTLuse_alt_spacing + empty$ + { skip$ } + { CTLuse_alt_spacing + yes.no.to.int + 'is.use.alt.interword.spacing := + } + if$ + CTLalt_stretch_factor + empty$ + { skip$ } + { CTLalt_stretch_factor + 'ALTinterwordstretchfactor := + "\renewcommand\BIBentryALTinterwordstretchfactor{" + ALTinterwordstretchfactor * "}" * + write$ newline$ + } + if$ + CTLdash_repeated_names + empty$ + { skip$ } + { CTLdash_repeated_names + yes.no.to.int + 'is.dash.repeated.names := + } + if$ + CTLname_format_string + empty$ + { skip$ } + { CTLname_format_string + 'name.format.string := + } + if$ + CTLname_latex_cmd + empty$ + { skip$ } + { CTLname_latex_cmd + 'name.latex.cmd := + } + if$ + + + num.names.shown.with.forced.et.al max.num.names.before.forced.et.al > + { "CTLnames_show_etal cannot be greater than CTLmax_names_forced_etal in " cite$ * warning$ + max.num.names.before.forced.et.al 'num.names.shown.with.forced.et.al := + } + { skip$ } + if$ +} + + +%%%%%%%%%%%%%%%%%%% +%% ENTRY ALIASES %% +%%%%%%%%%%%%%%%%%%% +FUNCTION {conference}{inproceedings} +FUNCTION {online}{electronic} +FUNCTION {internet}{electronic} +FUNCTION {webpage}{electronic} +FUNCTION {default.type}{misc} + + + +%%%%%%%%%%%%%%%%%% +%% MAIN PROGRAM %% +%%%%%%%%%%%%%%%%%% + +READ + +EXECUTE {initialize.controls} +EXECUTE {initialize.status.constants} +EXECUTE {banner.message} + +EXECUTE {initialize.longest.label} +ITERATE {longest.label.pass} + +EXECUTE {begin.bib} +ITERATE {call.type$} +EXECUTE {end.bib} + +EXECUTE{completed.message} + + +%% That's all folks, mds. diff --git a/urithesis.cls b/urithesis.cls index ae7c233..51a9bf6 100755 --- a/urithesis.cls +++ b/urithesis.cls @@ -306,6 +306,10 @@ San Jose State University thesis format] } \def\newchapter#1{% + % ZSH - Needed to comply with thesis guidelines + \setlength{\parskip}{0em} + \setlength{\abovedisplayshortskip}{-2ex} % Ensure equations are double spaced. + %%%%%% \if@gotfirstchapter\else \@gotfirstchaptertrue \initialstuff @@ -746,11 +750,12 @@ San Jose State University thesis format] \def\@makechapterhead#1{{% \renewcommand{\baselinestretch}{1.0}\bfseries% \begin{center} - \rule{0in}{0.5in}% + %\rule{0in}{0.5in}% + \doublespace \MakeUppercase{\@chapapp} - \@ifundefined{@usesingappend}{\space\thechapter}{}\vspace{2.0ex}\\% + \@ifundefined{@usesingappend}{\space\thechapter}{}\vspace{0ex}\\% #1 - \vskip 2.0ex + %\vskip 2.0ex \end{center} }} @@ -759,6 +764,11 @@ San Jose State University thesis format] \vskip 1.0ex \@plus\p@ {\@dottedtocline{0}{1.5em}{1.5em}{\bfseries\noindent#1}{#2}}% } +% Make table of contents entries for numbered chapter headers. +\newcommand*\l@chapterapp[2]{% + \vskip 1.0ex \@plus\p@ + {\@dottedtocline{0}{1.5em}{1.5em}{\noindent#1}{#2}}% +} % Make table of contents entries for unnumbered chapter headers. \newcommand*\l@chapterx[2]{% @@ -857,13 +867,13 @@ San Jose State University thesis format] % These commands define the format of the headers for section, % subsection, and subsubsection commands. \renewcommand\section{% - \@startsection {section}{1}{\z@}{4.0ex}{0.01ex}% + \@startsection {section}{1}{\z@}{2.0ex}{0.01ex}% {\renewcommand{\baselinestretch}{1.0}\normalfont\normalsize\bfseries}} \renewcommand\subsection{% - \@startsection {subsection}{2}{\z@}{4.0ex}{0.01ex}% + \@startsection {subsection}{2}{\z@}{2.0ex}{0.01ex}% {\renewcommand{\baselinestretch}{1.0}\normalfont\normalsize\bfseries}} \renewcommand\subsubsection{% - \@startsection {subsubsection}{3}{\z@}{4.0ex}{0.01ex}% + \@startsection {subsubsection}{3}{\z@}{2.0ex}{0.01ex}% {\renewcommand{\baselinestretch}{1.0}\normalfont\normalsize\bfseries}} % These commands generate the figure/table/equation name, and records @@ -943,10 +953,10 @@ San Jose State University thesis format] \typeout{\@chapapp\space\thechapter.}% \if@gotfirstappendix \@ifundefined{@usesingappend}{ - \addcontentsline{toc}{chapter}% + \addcontentsline{toc}{chapterapp}% {\protect\numberline{\thechapter}#1}% }{% - \addcontentsline{toc}{chapter}{#1}}% + \addcontentsline{toc}{chapterapp}{#1}}% \else \addcontentsline{toc}{chapter}% {\protect\numberline{\thechapter}#1}% @@ -962,7 +972,8 @@ San Jose State University thesis format] \else \@makechapterhead{#2}% \@afterheading - \fi} + \fi + \vspace{-2ex}} % ZSH - Needed to ensure double space throughout %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % Create pages of the thesis. @@ -1005,22 +1016,24 @@ my {\@worktype} for scholarly purposes. \begin{center}{ \ifthenelse{\equal{\projectType}{Project}}% uppercase for thesis, not uppercase for report {{\@title} \\ } - { \MakeUppercase{\@title} \\ } + { \singlespace \MakeUppercase{\@title} \\ } % ZSH per thesis guidelines } \end{center} \vfill \begin{center}{ +\doublespace % ZSH per thesis guidelines \noindent A \projectType\\ %\MakeUppercase{\@worktype} Presented to\\ The Faculty of the Department of Computer Science\\ -San Jose State University\\ +San Jos\'{e} State University\\ } \end{center} \vfill \begin{center} +\doublespace % ZSH per thesis guidelines In Partial Fulfillment\\ of the Requirements for the Degree\\ Master of Science \\ @@ -1028,6 +1041,7 @@ San Jose State University\\ \vfill \begin{center} +\doublespace % ZSH per thesis guidelines by\\ {\@author}\\ \graduationMonth\ {\@copyrightyear}\\ @@ -1038,6 +1052,7 @@ by\\ \null \vfill \begin{center} +\doublespace % ZSH per thesis guidelines \copyright~{\@copyrightyear}\\ {\@author}\\ ALL RIGHTS RESERVED\\ @@ -1061,16 +1076,17 @@ The Designated \projectType\ Committee Approves the \projectType\ Titled\\ %\begin{center}{ \ifthenelse{\equal{\projectType}{Project}}% uppercase for thesis, not uppercase for report {{\@title} \\ } - { \MakeUppercase{\@title} \\ } + { \singlespace \MakeUppercase{\@title} \\ } % ZSH per thesis guidelines %} %\end{center} \vspace{24pt} +\doublespace by\\ {\@author}\\ \vspace{24pt} -APPROVED FOR THE DEPARTMENTS OF COMPUTER SCIENCE\\ %\vspace{-1.0em}\\ +APPROVED FOR THE DEPARTMENT OF COMPUTER SCIENCE\\ %\vspace{-1.0em}\\ \vspace{24pt} -SAN JOSE STATE UNIVERSITY\\ +SAN JOS\'{E} STATE UNIVERSITY\\ \vspace{24pt} \graduationMonth\ {\@copyrightyear}\\ \end{center} @@ -1105,7 +1121,7 @@ SAN JOSE STATE UNIVERSITY\\ \def\abstractpages{\@ifundefined{@abstract}{}{ \newpage \sloppy - \chapter*{ABSTRACT\\ \vspace{12pt} \@title\\ \vspace{12pt} by \@author} + \chapter*{ABSTRACT\\ {\normalfont \vspace{12pt} \@title\\ \vspace{12pt} by \@author}} % \addcontentsline{toc}{chapterx}{ABSTRACT} \thispagestyle{empty} \pagestyle{empty}