docs(linux): AM62X, AM62PX: Update LPM power measurements

Update the power measurements for each low power mode for SDK 10.1.

Signed-off-by: Kendall Willis <[email protected]>

Author: kwillis01

source/devices/AM62PX/linux/Linux_Performance_Guide.rst

@@ -787,30 +787,35 @@ Low Power Performance
 Table:  **Deep sleep**
 
 .. csv-table::
-    :header: "Rail name","Rail voltage(V)","Power (mW)"
+   :header: "Rail name","Rail voltage(V)","Power (mW)"
 
-    "vdd_core","0.85","10.06"
-    "vddr_core","0.85","0.92"
-    "soc_dvdd_3v3","3.30","6.63"
-    "soc_dvdd_1v8","1.80","2.78"
-    "vdda_1v8","1.80","72.19"
-    "vdd_lpddr4/vdd_ddr4","1.10","4.40"
-    "Total"," ","96.98"
+   "vdd_core","0.85","12.98"
+   "vddr_core","0.85","1.01"
+   "soc_dvdd_3v3","3.30","5.65"
+   "soc_dvdd_1v8","1.80","2.76"
+   "vdda_1v8","1.80","72.23"
+   "vdd_lpddr4/vdd_ddr4","1.10","3.75"
+   "Total"," ","98.37"
 
 Table:  **MCU only**
 
 .. csv-table::
-    :header: "Rail name","Rail voltage(V)","Power (mW)"
+   :header: "Rail name","Rail voltage(V)","Power (mW)"
 
-    "vdd_core","0.85","207.60"
-    "vddr_core","0.85","2.46"
-    "soc_dvdd_3v3","3.30","6.56"
-    "soc_dvdd_1v8","1.80","2.63"
-    "vdda_1v8","1.80","80.23"
-    "vdd_lpddr4/vdd_ddr4","1.10","4.05"
-    "Total"," ","303.53"
+   "vdd_core","0.85","203.98"
+   "vddr_core","0.85","2.44"
+   "soc_dvdd_3v3","3.30","5.55"
+   "soc_dvdd_1v8","1.80","2.68"
+   "vdda_1v8","1.80","81.25"
+   "vdd_lpddr4/vdd_ddr4","1.10","4.33"
+   "Total"," ","300.24"
 
 Partial I/O Data
 - All voltage rails were measured to be near 0V
 
+.. note::
+
+   The power consumption on the vdda_1v8 rail is not indicitive of the SoC's power consumption due to an oscillator on the rail
+   that has significant current consumption.
+
 Further optimizations are possible for these low power modes. Please refer to the AM62x Power Consumption App Note (https://www.ti.com/lit/pdf/spradg1)

source/devices/AM62X/linux/Linux_Performance_Guide.rst

@@ -923,28 +923,28 @@ Low Power Performance
 Table:  **Deep sleep**
 
 .. csv-table::
-    :header: "Rail name","Rail voltage(V)","Power (mW)"
+   :header: "Rail name","Rail voltage(V)","Power (mW)"
 
-    "vdd_core","0.85","7.95"
-    "vddr_core","0.85","n/a"
-    "soc_dvdd_3v3","3.30","6.20"
-    "soc_dvdd_1v8","1.80","1.98"
-    "vdda_1v8","1.80","1.80"
-    "vdd_lpddr4/vdd_ddr4","1.10","7.50"
-    "Total"," ","25.43"
+   "vdd_core","0.85","9.79"
+   "vddr_core","0.85","n/a"
+   "soc_dvdd_3v3","3.30","7.20"
+   "soc_dvdd_1v8","1.80","1.98"
+   "vdda_1v8","1.80","1.98"
+   "vdd_lpddr4/vdd_ddr4","1.10","8.78"
+   "Total"," ","29.75"
 
 Table:  **MCU only**
 
 .. csv-table::
-    :header: "Rail name","Rail voltage(V)","Power (mW)"
-
-    "vdd_core","0.85","121.81"
-    "vddr_core","0.85","n/a"
-    "soc_dvdd_3v3","3.30","12.72"
-    "soc_dvdd_1v8","1.80","1.62"
-    "vdda_1v8","1.80","10.71"
-    "vdd_lpddr4/vdd_ddr4","1.10","7.74"
-    "Total"," ","154.61"
+   :header: "Rail name","Rail voltage(V)","Power (mW)"
+
+   "vdd_core","0.85","110.46"
+   "vddr_core","0.85","n/a"
+   "soc_dvdd_3v3","3.30","13.98"
+   "soc_dvdd_1v8","1.80","1.62"
+   "vdda_1v8","1.80","11.30"
+   "vdd_lpddr4/vdd_ddr4","1.10","8.16"
+   "Total"," ","145.88"
 
 Partial I/O Data
 - All voltage rails were measured to be near 0V