HA custom component for bluelink climate control. Currently, it has only been tested with an IONIQ 5 (USA).
- https://www.home-assistant.io server installed
-
install HACS integration: https://hacs.xyz/docs/setup/download/
-
enable HACS integration on in HA assistant. Then add custom repository.
- Fill out repository url and Category: Integration
https://github.com/TaiPhamD/ha-bluelink.git
Clone this repository then copy the bluelink_api_hacs folder to your home-assistant config/custom_components folder (create a custom_components folder if you don't have one under /config). Restart Home Assistant, and then the integration can be added and configured through the native integration setup UI (search for bluelink).
- The config for this integration requires the following:
- username: the username of your bluelink account
- password: the password of your bluelink account
- Once you log in then it will allow you to select a vehicle associated with your account.
- Setting the Desired Temperature: Adjust the climate control device to your preferred temperature. The default setting is 72°F.
- Activating Climate Control:
- To start the climate control, use the provided switch. This will initiate the climate control at the temperature set in step 1.
- Note that the switch will automatically return to the "off" position in two scenarios:
- Manually turning it off.
- Automatically after 10 minutes, as Bluelink's system automatically deactivates climate control after this duration.
- To ensure smooth operation and prevent errors from Bluelink, the system restricts rapid toggling of the switch. There must be a minimum interval of 60 seconds between each toggle.
