feat: debian: Add guide to enable Wifi

Support was recently added to Debian for OOB Wifi experience using
CC33xx cards. So add documentation for it, to AM62PX and AM62X docs.

Signed-off-by: Suhaas Joshi <[email protected]>

Author: jsuhaas22

configs/AM62PX/AM62PX_debian_toc.txt

@@ -7,5 +7,7 @@ debian/Overview/Overview_Technical_Support
 devices/AM62PX/debian/Getting_Started_Guide
 debian/Building_Debian_Image
 debian/Building_Debian_Packages
+debian/How_to_Guides/index_How_to_Guides
+debian/How_to_Guides/Connecting_to_Wifi
 debian/Demo_User_Guides/index_Demos
 debian/Demo_User_Guides/Chromium_Browser

configs/AM62X/AM62X_debian_toc.txt

@@ -9,3 +9,5 @@ debian/Building_Debian_Image
 debian/Building_Debian_Packages
 debian/Demo_User_Guides/index_Demos
 debian/Demo_User_Guides/Chromium_Browser
+debian/How_to_Guides/index_How_to_Guides
+debian/How_to_Guides/Connecting_to_Wifi

source/debian/How_to_Guides/Connecting_to_Wifi.rst

@@ -0,0 +1,30 @@
+.. include:: ../../linux/How_to_Guides/Target/How_To_Enable_M2CC3301_in_linux.rst
+   :start-after: .. enable_cc33xx_in_linux_overview_start
+   :end-before: .. enable_cc33xx_in_linux_overview_end
+
+After flashing the SD card with the :file:`tisdk-debian-trixie-image`, mount the SD card onto a host computer, if not done already.
+On the boot partition of the SD card, add one of the following variables, corresponding to the starter kit,
+into the :file:`uEnv.txt` file. This will let u-boot enable the m.2-cc33x1 devicetree overlay. The :file:`uEnv.txt` file can be found on the ``boot``
+partition of the SD card. 
+
+.. include:: ../linux/How_to_Guides/Target/How_To_Enable_M2CC3301_in_linux.rst
+   :start-after: .. enable_cc33xx_in_linux_overlay_start
+   :end-before: .. enable_cc33xx_in_linux_overlay_end
+
+
+****************
+Connect to Wi-Fi
+****************
+
+Using scripts provided in the SDK makes connecting to an Access Point or router straightforward.
+The following are steps to connect to a WPA password-secured Access Point. 
+
+.. code-block:: console
+
+    cd /usr/share/cc33xx
+    bash ./sta_start.sh
+    bash ./sta_connect.sh -s WPA-PSK -n <SSID> -p <PASSWORD>
+    udhcpc -i wlan0
+
+For more information on the Wi-Fi capabilities of the CC33xx devices, please 
+see the documentation that can be found in the `CC33xx SDK <https://www.ti.com/tool/CC33XX-SOFTWARE>`_.

source/debian/How_to_Guides/index_How_to_Guides.rst

@@ -0,0 +1,10 @@
+.. include:: /_replacevars.rst
+
+#############
+How to Guides
+#############
+
+.. toctree::
+   :maxdepth: 1
+
+   /debian/How_to_Guides/Connecting_to_Wifi

source/devices/AM62PX/debian/index.rst

@@ -18,6 +18,7 @@ Debian Developer's Guide
    Getting_Started_Guide
    /debian/Building_Debian_Image
    /debian/Building_Debian_Packages
+   /debian/How_to_Guides/index_How_to_Guides
    /debian/Demo_User_Guides/index_Demos
 
 |

source/devices/AM62X/debian/index.rst

@@ -18,6 +18,7 @@ Debian Developer's Guide
    Getting_Started_Guide
    /debian/Building_Debian_Image
    /debian/Building_Debian_Packages
+   /debian/How_to_Guides/index_How_to_Guides
    /debian/Demo_User_Guides/index_Demos
 
 |

source/linux/How_to_Guides/Target/How_To_Enable_M2CC3301_in_linux.rst

@@ -1,5 +1,7 @@
 .. _enable_m2cc3301:
 
+.. enable_cc33xx_in_linux_overview_start
+
 #################################
 How to Enable M.2-CC33x1 in Linux
 #################################
@@ -36,11 +38,15 @@ M.2 card is held down by the screw. The end result should be as shown in the ima
 Enable DT Overlay for M.2-CC33x1
 ********************************
 
+.. enable_cc33xx_in_linux_overview_end
+
 After flashing the SD card with the :file:`tisdk-default-image`, mount the SD card onto a host computer, if not done already.
 On the boot partition of the SD card, add one of the following variables, corresponding to the starter kit,
 into the :file:`uEnv.txt` file. This will let u-boot enable the m.2-cc33x1 devicetree overlay. The :file:`uEnv.txt` file can be found on the ``boot``
 partition of the SD card. 
 
+.. enable_cc33xx_in_linux_overlay_start
+
 For SK-AM62B-P1: 
 
     .. code-block:: console
@@ -66,6 +72,7 @@ For SK-AM62P-LP:
     Though the name of the file ends with `m2-cc3301.dtbo`, the same file applies for the M.2-CC3351 board.
     Do not change the name of this file in the :file:`uEnv.txt` regardless of which M.2 card that is being used.
 
+.. enable_cc33xx_in_linux_overlay_end
 
 ****************
 Connect to Wi-Fi