fix(android): AM62PX: Fix the BOOTMODE switch labels

The BOOTMODE DIP switch lables are different for AM62 and AM62P
EVMs. Fix the android instructions to use the correct labels
for AM62P EVM.

Signed-off-by: Vishal Mahaveer <[email protected]>

Author: vishalmti

source/android/Overview_Flashing.rst

@@ -58,6 +58,8 @@ Once the build is complete, follow the steps below to flash the images to eMMC.
 
 1. Change the boot mode DIP switches to DFU mode:
 
+.. ifconfig:: CONFIG_part_variant in ('AM62X')
+
    .. list-table::
       :widths: 16 16 16
       :header-rows: 1
@@ -70,6 +72,20 @@ Once the build is complete, follow the steps below to flash the images to eMMC.
         - 00000000
         - 11001010
 
+.. ifconfig:: CONFIG_part_variant in ('AM62PX')
+
+   .. list-table::
+      :widths: 16 16 16
+      :header-rows: 1
+
+      * - Switch Label
+        - SW5: 12345678
+        - SW4: 12345678
+
+      * - USB DFU
+        - 00000000
+        - 11001010
+
 2. Ensure the device is plugged in with USB host and debug UART/serial debug
 
 3. Open a terminal debugger to view console output from the device:
@@ -320,6 +336,8 @@ Once the build is complete, follow the steps below to flash the images to eMMC.
 
 6. Change boot mode DIP switches to boot from eMMC user partitions and power cycle the board:
 
+.. ifconfig:: CONFIG_part_variant in ('AM62X')
+
    .. list-table::
       :widths: 16 16 16
       :header-rows: 1
@@ -332,6 +350,20 @@ Once the build is complete, follow the steps below to flash the images to eMMC.
         - 00000000
         - 11000010
 
+.. ifconfig:: CONFIG_part_variant in ('AM62PX')
+
+   .. list-table::
+      :widths: 16 16 16
+      :header-rows: 1
+
+      * - Switch Label
+        - SW5: 12345678
+        - SW4: 12345678
+
+      * - EMMC (with UDA)
+        - 00000000
+        - 11000010
+
 
 7. Board should boot the Android images now.
 

source/devices/AM62PX/android/Application_Notes_Android_Bootloader_SD_Card.rst

@@ -70,8 +70,8 @@ the images are built from source.
      :header-rows: 1
 
      * - Switch Label
-       - SW2: 12345678
-       - SW3: 12345678
+       - SW5: 12345678
+       - SW4: 12345678
 
      * - SD
        - 01000000

source/devices/AM62PX/android/Application_Notes_Android_SD_CARD.rst

@@ -81,8 +81,8 @@ Flashing SD Card
      :header-rows: 1
 
      * - Switch Label
-       - SW2: 12345678
-       - SW3: 12345678
+       - SW5: 12345678
+       - SW4: 12345678
 
      * - SD
        - 01000000