feat: Update Buildroot doc for 10.1 release

Update build steps for Buildroot for 10.1 release.

Signed-off-by: Paresh Bhagat <[email protected]>

Author: paresh-bhagat12

source/buildroot/Building_Buildroot_Image.rst

@@ -34,8 +34,8 @@ To set up and use the `buildroot-external-ti` external tree, follow these steps:
 
 .. code-block:: console
 
-    $ git clone -b 2024.05.1 https://github.com/buildroot/buildroot
-    $ git clone -b 10.00.07 https://github.com/TexasInstruments/buildroot-external-TI.git
+    $ git clone -b 2024.05.3 https://github.com/buildroot/buildroot
+    $ git clone -b 10.01.10.04 https://github.com/TexasInstruments/buildroot-external-TI.git
  
 2. Configure Buildroot to use the external tree and choose a configuration file
 
@@ -80,7 +80,7 @@ the necessary components and creates the root filesystem, kernel, and bootloader
 
 .. code-block:: console
 
-    $ make TI_K3_BOOT_FIRMWARE_VERSION=10.00.07
+    $ make TI_K3_BOOT_FIRMWARE_VERSION=10.01.10
 
 The build process can take some time, depending on your system's resources and
 the complexity of the configuration.
@@ -107,7 +107,7 @@ Example for SD card:
 
 .. code-block:: console
 
-    $ sudo dd if=output/images/rootfs.ext2 of=/dev/sdX bs=4M
+    $ sudo dd if=output/images/sdcard.img of=/dev/sdX
     $ sync
     Replace /dev/sdX with the appropriate device identifier for your SD card.
 
@@ -128,9 +128,6 @@ terminal window:
 
 .. code-block:: console
 
-    U-Boot SPL 2024.04 (Aug 02 2024 - 09:56:18 +0000)
-    SYSFW ABI: 4.0 (firmware rev 0x000a '10.0.8--v10.00.08 (Fiery Fox)')
-    SPL initial stack usage: 13392 bytes
     Trying to boot from MMC2
     Authentication passed
     Authentication passed
@@ -152,8 +149,7 @@ terminal window:
 
     Welcome to Buildroot
     buildroot login: root
-    # uname -a
-    Linux buildroot 6.6.32 #1 SMP PREEMPT Tue Aug  6 11:40:07 UTC 2024 aarch64 GNU/Linux
+    #
 
 *************
 Going further

source/devices/AM62X/buildroot/Getting_Started_Guide.rst

@@ -30,14 +30,16 @@ Create SD Card using balenaEtcher
 *********************************
 
 1.  Download the default bootable SD card image available on the release page as
-    :file:`sdcard.img`
+    :file:`tisdk-buildroot-sdcard-image-am62xx-evm-<version>.img` for Linux image
+    or :file:`tisdk-buildroot-sdcard-image-rt-am62xx-evm-<version>.img` for RT-Linux
+    image.
 
 2.  Download and install the balenaEtcher tool:
 
         Balena Etcher is an open-source utility that can be installed on both Linux and Windows.
         Download the tool from `this link <https://www.balena.io/etcher/>`__ and install it.
 
-3.  Flash the WIC image to the SD card:
+3.  Flash the SD Card image to the SD card:
 
         Insert a micro SD card into the USB SD card reader and start Etcher. Choose the sdcard
         image to be flashed, choose the USB SD card reader as the target, and then click "Flash".

source/devices/AM62X/buildroot/version.txt

@@ -1 +1 @@
-10_00_07
+10_01_10_04