docs(edgeai): Update name_overlays for AM62A EdgeAI

With [0], the additional carveouts needed for AM62A EdgeAI
is now supported via dtb overlay.

Hence, update EdgeAI documentation for the same.

[0]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/?h=ti-linux-6.12.y&id=95010a7c186b86f738615231016aa017ac527612

Signed-off-by: Chirag Shilwant <[email protected]>

Author: cshilwant

source/devices/AM62AX/edgeai/getting_started.rst

@@ -99,7 +99,7 @@ firmly to keep the connector cable in place.
    by specifying the dtb overlay file in
    ``/run/media/BOOT-mmcblk1p1/uEnv.txt`` as below,
 
-   ``name_overlays=ti/k3-am62x-sk-csi2-imx219.dtbo``
+   ``name_overlays=ti/k3-am62x-sk-csi2-imx219.dtbo ti/k3-am62a7-sk-edgeai.dtbo``
 
    Reboot the board after editing and saving the file. Dtb files can be found
    under /boot/dtb/ti.
@@ -160,7 +160,7 @@ firmly to keep the connector cable in place.
    file in ``/run/media/BOOT-mmcblk1p1/uEnv.txt``. Let's take an example of
    single IMX219 camera connected to Mini fusion board at Port 0.
 
-   ``name_overlays=ti/k3-am62x-sk-csi2-v3link-fusion.dtbo ti/k3-v3link-imx219-0-0.dtbo``
+   ``name_overlays=ti/k3-am62x-sk-csi2-v3link-fusion.dtbo ti/k3-v3link-imx219-0-0.dtbo ti/k3-am62a7-sk-edgeai.dtbo``
 
    Similarly for camera connected to other port, dtbo can be appended above.
    Reboot the board after editing and saving the file. Dtb files can be found

source/devices/AM62AX/edgeai/pi_hdr_programming.rst

@@ -22,7 +22,7 @@ By default, the 40-pin header is not enabled on AM69A SK board. This can be enab
 specifying the dtb overlay file ``k3-am62a7-sk-rpi-hdr-ehrpwm.dtbo`` in
 ``/run/media/BOOT-mmcblk1p1/uEnv.txt`` as given below.
 
-``name_overlays=ti/k3-am62a7-sk-rpi-hdr-ehrpwm.dtbo``
+``name_overlays=ti/k3-am62a7-sk-rpi-hdr-ehrpwm.dtbo ti/k3-am62a7-sk-edgeai.dtbo``
 
 Reboot the board after editing and saving the file.