diff --git a/source/linux/Foundational_Components/Kernel/Kernel_Drivers/Network/HSR_PRP_Non_Offload.rst b/source/linux/Foundational_Components/Kernel/Kernel_Drivers/Network/HSR_PRP_Non_Offload.rst
index 93f2e6999..a0c92ea1d 100644
--- a/source/linux/Foundational_Components/Kernel/Kernel_Drivers/Network/HSR_PRP_Non_Offload.rst
+++ b/source/linux/Foundational_Components/Kernel/Kernel_Drivers/Network/HSR_PRP_Non_Offload.rst
@@ -188,169 +188,3 @@ Multicast MAC address can be added/deleted using ip maddr commands or Linux sock
 .. code-block:: console
 
    # ip maddr del 01:00:5e:00:00:05 dev hsr0
-
-.. ifconfig:: CONFIG_part_variant in ('AM64X', 'AM65X')
-
-   .. rubric:: PTP Ordinary Clock
-
-   PTP Master Clock
-
-   The PTP Ordinary Clock (OC) implementation is provided by the linuxptp application.
-   The following command should be executed for master mode clock.
-
-   .. code-block:: console
-
-      ptp4l -f gm_hsr0.cfg -m
-
-   The gm_hsr0.cfg is given below
-
-   .. code-block:: console
-
-      root@am65xx-evm:~# cat gm_hsr0.cfg
-      [global]
-      sanity_freq_limit 0
-      step_threshold 0.00002
-      tx_timestamp_timeout 20
-
-      domainNumber 0
-      priority1    127
-      priority2    128
-      slaveOnly    0
-
-      twoStepFlag                  1
-      summary_interval             0
-      doubly_attached_clock        1
-
-      [hsr0]
-      redundancy                   1
-      delay_mechanism              P2P
-      network_transport            L2
-
-      [eth1]
-      redundancy                   1
-      redundancy_master_interface  hsr0
-      redundancy_slave_number      1
-
-      logAnnounceInterval          0
-      logSyncInterval              0
-      logMinPdelayReqInterval      0
-      announceReceiptTimeout       3
-      syncReceiptTimeout           2
-
-      delay_mechanism              P2P
-      network_transport            L2
-      egressLatency                726
-      ingressLatency               186
-      fault_reset_interval         0
-
-      [eth2]
-      redundancy                   1
-      redundancy_master_interface  hsr0
-      redundancy_slave_number      2
-
-      logAnnounceInterval          0
-      logSyncInterval              0
-      logMinPdelayReqInterval      0
-      announceReceiptTimeout       3
-      syncReceiptTimeout           2
-
-      delay_mechanism              P2P
-      network_transport            L2
-      egressLatency                726
-      ingressLatency               186
-      fault_reset_interval         0
-
-   .. rubric:: PTP Slave Clock
-
-   The following command should be executed for slave mode clock.
-
-   .. code-block:: console
-
-      ptp4l -f oc_hsr0.cfg -m -s
-
-   The oc_hsr0.cfg is given below
-
-   .. code-block:: console
-
-      [global]
-      sanity_freq_limit 0
-      step_threshold 0.00002
-      tx_timestamp_timeout 20
-
-      domainNumber 0
-      priority1    128
-      priority2    128
-      slaveOnly    0
-
-      twoStepFlag                  1
-      summary_interval             0
-      doubly_attached_clock        1
-
-      [hsr0]
-      redundancy                   1
-      delay_mechanism              P2P
-      network_transport            L2
-
-      [eth1]
-      redundancy                   1
-      redundancy_master_interface  hsr0
-      redundancy_slave_number      1
-
-      logAnnounceInterval          0
-      logSyncInterval              1
-      logMinPdelayReqInterval      0
-      announceReceiptTimeout       3
-      syncReceiptTimeout           2
-
-      delay_mechanism              P2P
-      network_transport            L2
-      egressLatency                726
-      ingressLatency               186
-      fault_reset_interval         0
-
-      [eth2]
-      redundancy                   1
-      redundancy_master_interface  hsr0
-      redundancy_slave_number      2
-
-      logAnnounceInterval          0
-      logSyncInterval              1
-      logMinPdelayReqInterval      0
-      announceReceiptTimeout       3
-      syncReceiptTimeout           2
-
-      delay_mechanism              P2P
-      network_transport            L2
-      egressLatency                726
-      ingressLatency               186
-      fault_reset_interval         0
-
-   .. rubric:: PPS
-
-   PPS can be tested using the testptp.c tool.
-
-   To find which PTP Hardware Clock is associated with the netdevice, use
-
-   .. code-block:: console
-
-      ethtool -T DEVNAME
-
-   To turn on PPS,
-
-   .. code-block:: console
-
-      # ip link set dev eth1 up
-      # ./testptp -d /dev/ptp2 -P 1
-      pps for system time request okay
-
-   To turn off PPS,
-
-   .. code-block:: console
-
-      # ./testptp -d /dev/ptp2 -P 0
-      pps for system time request okay
-
-   .. rubric:: PTP Over VLAN
-
-   For PTP Over VLAN, the PTP oc_hsr0.cfg and gm_hsr0.cfg should use VLAN
-   interface instead of hsr0.