编译 验证就报错

[TomYule]

编译 验证就报错
#define PIN_LIGHT1 D4
#define PIN_DATA1 A0
#define PIN_LIGHT2 D3
#define PIN_LIGHT3 D2
#define PIN_LIGHT4 D1

Arduino:1.8.14 Hourly Build 2021/03/09 09:34 (Mac OS X), 开发板："Generic ESP8266 Module, 80 MHz, Flash, Legacy (new can return nullptr), All SSL ciphers (most compatible), dtr (aka nodemcu), 26 MHz, 40MHz, DOUT (compatible), 1MB (FS:64KB OTA:~470KB), 2, nonos-sdk 2.2.1+100 (190703), v2 Lower Memory, Disabled, None, Only Sketch, 115200"











/Users/wander/Documents/Arduino/ESP8266WebServer-master/HelloServer/HelloServer.ino: In function 'void pin()':
HelloServer:11:20: error: 'D4' was not declared in this scope
 #define PIN_LIGHT1 D4
                    ^
/Users/wander/Documents/Arduino/ESP8266WebServer-master/HelloServer/HelloServer.ino:33:18: note: in expansion of macro 'PIN_LIGHT1'
       controller(PIN_LIGHT1);break;
                  ^
HelloServer:13:20: error: 'D3' was not declared in this scope
 #define PIN_LIGHT2 D3
                    ^
/Users/wander/Documents/Arduino/ESP8266WebServer-master/HelloServer/HelloServer.ino:35:18: note: in expansion of macro 'PIN_LIGHT2'
       controller(PIN_LIGHT2);break;
                  ^
HelloServer:14:20: error: 'D2' was not declared in this scope
 #define PIN_LIGHT3 D2
                    ^
/Users/wander/Documents/Arduino/ESP8266WebServer-master/HelloServer/HelloServer.ino:37:18: note: in expansion of macro 'PIN_LIGHT3'
       controller(PIN_LIGHT3);break;
                  ^
HelloServer:15:20: error: 'D1' was not declared in this scope
 #define PIN_LIGHT4 D1
                    ^
/Users/wander/Documents/Arduino/ESP8266WebServer-master/HelloServer/HelloServer.ino:39:18: note: in expansion of macro 'PIN_LIGHT4'
       controller(PIN_LIGHT4);break;
                  ^
/Users/wander/Documents/Arduino/ESP8266WebServer-master/HelloServer/HelloServer.ino: In function 'void setup()':
HelloServer:11:20: error: 'D4' was not declared in this scope
 #define PIN_LIGHT1 D4
                    ^
/Users/wander/Documents/Arduino/ESP8266WebServer-master/HelloServer/HelloServer.ino:111:11: note: in expansion of macro 'PIN_LIGHT1'
   pinMode(PIN_LIGHT1, OUTPUT);
           ^
HelloServer:13:20: error: 'D3' was not declared in this scope
 #define PIN_LIGHT2 D3
                    ^
/Users/wander/Documents/Arduino/ESP8266WebServer-master/HelloServer/HelloServer.ino:112:11: note: in expansion of macro 'PIN_LIGHT2'
   pinMode(PIN_LIGHT2, OUTPUT);
           ^
HelloServer:14:20: error: 'D2' was not declared in this scope
 #define PIN_LIGHT3 D2
                    ^
/Users/wander/Documents/Arduino/ESP8266WebServer-master/HelloServer/HelloServer.ino:113:11: note: in expansion of macro 'PIN_LIGHT3'
   pinMode(PIN_LIGHT3, OUTPUT);
           ^
HelloServer:15:20: error: 'D1' was not declared in this scope
 #define PIN_LIGHT4 D1
                    ^
/Users/wander/Documents/Arduino/ESP8266WebServer-master/HelloServer/HelloServer.ino:114:11: note: in expansion of macro 'PIN_LIGHT4'
   pinMode(PIN_LIGHT4, OUTPUT);
           ^
exit status 1
'D4' was not declared in this scope


在文件 -> 首选项开启
“编译过程中显示详细输出”选项
这份报告会包含更多信息。

[ThinkCodeStudio]

这里的是对硬件IO口的宏定义，要对应硬件修改。
然后这个项目我用是没有问题的，你没有给我报错信息，我无法准确定位问题。

[TomYule]

重新更新了错误信息