Skip to content

CHANGELOG.md

Latest commit

 

History

History
1190 lines (832 loc) · 73.5 KB

CHANGELOG.md

File metadata and controls

1190 lines (832 loc) · 73.5 KB
Raw

Earthly Changelog

All notable changes to Earthly will be documented in this file.

Unreleased

v0.7.0-rc2 - 2023-01-18

The documentation for this version is available at the Earthly 0.7 documentation page.

Earthly CI

Earthly 0.7 is the first version compatible with Earthly CI.

Earthly 0.7 introduces the new keywords PIPELINE and TRIGGER to help define Earthly CI pipelines.

my-pipeline:
    PIPELINE --push
    TRIGGER push main
    TRIGGER pr main
    BUILD +my-target

For more information on how to use PIPELINE and TRIGGER, please see the reference documentation.

Podman support

Podman support has now been promoted out of beta status and is generally available in 0.7. Earthly will automatically detect the container frontend, whether that's docker or podman and use it automatically for running Buildkit locally, or for outputting images locally resulting from the build.

Please note that rootful podman is required. Rootless podman is not supported.

VERSION is now mandatory

The VERSION command is now required for all Earthfiles, and an error will occur if it is missing. If you are not ready to update your Earthfiles to use 0.7 (or 0.6), you can declare VERSION 0.5 to continue to use your Earthfiles.

Pushing no longer requires everything else to succeed

The behavior of the --push mode has changed in a backwards incompatible manner. Previously, --push commands would only execute if all other commands had succeeded. This precondition is no longer enforced, to allow for more flexible push ordering via the new WAIT clause. To achieve the behavior of the previous --push mode, you need to wrap any pre-required commands in a WAIT clause. For example, to push an image only if tests have passed, you would do the following:

test-and-push:
  WAIT
    BUILD +test
  END
  BUILD +my-image
my-image:
  ...
  SAVE IMAGE --push my-org/my-image:latest

This type of behavior is useful in order to have better control over the order of push operations. For example, you may want to push an image to a registry, followed by a deployment that uses the newly pushed image. Here is how this might look like:

push-and-deploy:
  ...
  WAIT
    BUILD +my-image
  END
  RUN --push ./deploy.sh my-org/my-image:latest
my-image:
  ...
  SAVE IMAGE --push my-org/my-image:latest

Where ./deploy.sh is custom deployment script instructing a production environment to start using the image that was just pushed.

Promoting experimental features

This version promotes a number of features that have been previously in Experimental and Beta status. To make use of the features in this version you need to declare VERSION 0.7 at the top of your Earthfile.

Declaring VERSION 0.7 is equivalent to

VERSION \
  --explicit-global \
  --check-duplicate-images \
  --earthly-version-arg \
  --use-cache-command \
  --use-host-command \
  --use-copy-link \
  --new-platform \
  --no-tar-build-output \
  --use-no-manifest-list \
  --use-chmod \
  --shell-out-anywhere \
  --earthly-locally-arg \
  --use-project-secrets \
  --use-pipelines \
  --earthly-git-author-args \
  --wait-block \
  0.6

For more information on the individual Earthfile feature flags see the Earthfile version-specific features page.

Changed

  • The behavior of the --push mode has changed in a backwards incompatible manner. Previously, --push commands would only execute if all other commands had succeeded. This precondition is no longer enforced, allowing push commands to execute in the middle of the build now. Previously under VERSION --wait-block 0.6.
  • ARGs declared in the base target do not automatically become global unless explicitly declared as such via ARG --global. Previously under VERSION --explicit-global 0.6.
  • The Cloud-based secrets model is now project-based; it is not compatible with the older global secrets model. Earthfiles which are defined as VERSION 0.5 or VERSION 0.6 will continue to use the old global secrets namespace; however the earthly command line no longer supports accessing or modifying the global secrets. A new earthly secrets migrate command has been added to help transition the global-based secrets to the new project-based secrets. If you need to manage secrets from Earthly 0.6 without migrating to the new 0.7 secrets, please use an older Earthly binary.
  • All COPY and SAVE ARTIFACT operations now use union filesystem merging for performing the COPY. This is similar to COPY --link in Dockerfiles, however in Earthly it is automatically enabled for all such operations. Previously under VERSION --use-copy-link 0.6.
  • The platform logic has been improved to allow overriding the platform in situations where previously it was not possible. Additionally, the default platform is now the native platform of the runner, and not of the host running Earthly. This makes platforms work better in remote runner settings. Previously under VERSION --new-platform 0.6.
  • Earthly will automatically shellout to determine the $HOME value when referenced #2469
  • Improved error message when invalid shell variable name is configured for a secret. #2478
  • earthly ls has been promoted from experimental to beta status.

Added

  • The commands PIPELINE and TRIGGER have been introduced for defining Earthly CI pipelines. Previously under VERSION --use-pipelines 0.6.
  • The clause WAIT is now generally available. The WAIT clause allows controlling of build order for operations that require it. This allows use-cases such as pushing images to a registry, followed by infrastructure changes that use the newly pushed images. Previously under VERSION --wait-block 0.6.
  • The command CACHE is now generally available. The CACHE command allows declaring a cache mount that can be used by any RUN command in the target, and also persists in the final image of the target (contents available when used via FROM). Previously under VERSION --use-cache-command 0.6.
  • The command HOST is now generally available. The HOST command allows declaring an /etc/hosts entry. Previously under VERSION --use-host-command 0.6.
  • New ARG EARTHLY_GIT_COMMIT_AUTHOR_TIMESTAMP will contain the author timestamp of the current git commit. #2462
  • New ARGs EARTHLY_VERSION and EARTHLY_BUILD_SHA contain the version of Earthly and the git sha of Earthly itself, respectively.
  • It is now possible to execute shell commands as part of any command that allows using variables. For example VOLUME $(cat /volume-name.txt). Previously under VERSION --shell-out-anywhere 0.6.
  • Allow custom image to be used for git opperations. #2027
  • Earthly now checks for duplicate image names when performing image outputs. Previously under VERSION --check-duplicate-images 0.6.
  • SAVE IMAGE --no-manifest-list allows outputting images of a different platform than the default one, but without the manifest list. This is useful for outputting images for platforms that do not support manifest lists, such as AWS Lambda. Previously under VERSION --use-no-manifest-list 0.6.
  • COPY --chmod <mode> allows setting the permissions of the copied files. Previously under VERSION --use-chmod 0.6.
  • The new ARG EARTHLY_LOCALLY indicates whether the current target is executed in a LOCALLY context. Previously under VERSION --earthly-locally-arg 0.6.
  • The new ARGs EARTHLY_GIT_AUTHOR and EARTHLY_GIT_CO_AUTHORS contain the author and co-authors of the current git commit, respectively. Previously under VERSION --earthly-git-author-args 0.6.
  • earthly doc [projectRef[+targetRef]] is a new subcommand in beta status. It will parse and output documentation comments on targets.
  • Ability to store docker registry credentials in cloud secrets and corresponding earthly registry login|list|logout commands; credentials can be associated with either your user or project.

Fixed

  • Support for saving files larger than 64kB on failure within a TRY/FINALLY block. #2452
  • Fixed race condition where SAVE IMAGE or SAVE ARTIFACT AS LOCAL commands were not always performed when contained in a target that was referenced by both a FROM (or COPY) and a BUILD command within the context of a WAIT/END block. #2237
  • WORKDIR is lost when --use-copy-link feature is enabled with GIT CLONE or COPY --keep-own commands. Note that --use-copy-link is enabled by default in VERSION 0.7. #2544
  • The CACHE command did not work when used inside a WITH DOCKER block. #2549
  • The --platform argument is no longer passed to docker or podman, which caused podman to always pull the buildkit image even when it already existed locally. #2511, #2566

v0.7.0-rc1 - 2023-01-18

This version promotes a number of features that have been previously in Experimental and Beta status. To make use of the features in this version you need to declare VERSION 0.7 at the top of your Earthfile. The VERSION command is now required for all Earthfiles, and an error will occur if it is missing. If you are not ready to update your Earthfiles to use 0.7 (or 0.6), you can declare VERSION 0.5 to continue to use your Earthfiles.

Declaring VERSION 0.7 is equivalent to

VERSION \
  --explicit-global \
  --check-duplicate-images \
  --earthly-version-arg \
  --use-cache-command \
  --use-host-command \
  --use-copy-link \
  --new-platform \
  --no-tar-build-output \
  --use-no-manifest-list \
  --use-chmod \
  --shell-out-anywhere \
  --earthly-locally-arg \
  --use-project-secrets \
  --use-pipelines \
  --earthly-git-author-args \
  0.6

For more information on the individual Earthfile feature flags see the Earthfile version-specific features page.

Changed

  • The Cloud-based secrets model is now project-based; it is not compatable with the older global secrets model. Earthfiles which are defined as VERSION 0.5 or VERSION 0.6 will continue to use the old global secrets namespace; however the earthly command line no longer supports accessing or modifying the global secrets. A new earthly secrets migrate command has been added to help transition the global-based secrets to the new project-based secrets.
  • Earthly will automatically shellout to determine the $HOME value when referenced; this requires the --shell-out-anywhere feature flag. #2469
  • Improved error message when invalid shell variable name is configured for a secret. #2478
  • The --ci flag no longer implies --save-inline-cache and --use-inline-cache since they were 100% CPU usage in some edge cases. These flags may still be explicitly enabled with --ci, but earthly will print a warning.

Added

  • New ARG EARTHLY_GIT_COMMIT_AUTHOR_TIMESTAMP will contain the author timestamp of the current git commit, this ARG must be enabled with the VERSION --git-commit-author-timestamp feature flag. #2462
  • Allow custom image to be used for git opperations. #2027

Fixed

  • Support for saving files larger than 64kB on failure within a TRY/FINALLY block. #2452
  • Fixed race condition where SAVE IMAGE or SAVE ARTIFACT AS LOCAL commands were not always performed when contained in a target that was referenced by both a FROM (or COPY) and a BUILD command within the context of a WAIT/END block. #2237
  • WORKDIR is lost when --use-copy-link feature is enabled with GIT CLONE or COPY --keep-own commands. #2544
  • The CACHE command did not work when used inside a WITH DOCKER block. #2549
  • The --platform argument is no longer passed to docker or podman, which caused podman to always pull the buildkit image even when it already existed locally. #2511, #2566

v0.6.30 - 2022-11-22

Added

  • Added support for a custom .netrc file path using the standard NETRC environmental variable. #2426
  • Ability to run multiple Earthly installations at a time via EARTHLY_INSTALLATION_NAME environment variable, or the --installation-name CLI flag. The installation name defaults to earthly if not specified. Different installations use different configurations, different buildkit Daemons, different cache volumes, and different ports.
  • New EARTHLY_CI builtin arg, which is set to true when earthly is run with the --ci flag, this ARG must be enabled with the VERSION --ci-arg feature flag. #2398

Changed

  • Updated buildkit to include changes up to a5263dd0f990a3fe17b67e0002b76bfd1f5b433d, which includes a change to speed-up buildkit startup time.
  • The Earthly Docker image works better for cases where a buildkit instance is not needed. The image now works without --privileged when using NO_BUILDKIT=1, and additionally, the image can also use /var/run/docker.sock or DOCKER_HOST for the buildkit daemon.

Fixed

  • Fixed Earthly on Mac would randomly hang on 1. Init if Earthly was installed from Homebrew or the Earthly homebrew tap. #2247
  • Only referenced ARGs from .env are displayed on failures, this prevents secrets contained in .env from being displayed. #1736
  • Earthly now correctly detects if Podman is running but is under the disguise of the Docker CLI.
  • Improved performance when copying files. Fully-cached builds are now dramatically faster as a result. #2049
  • Fixed --shell-out-anywhere bug where inner quotes were incorrectly removed. #2340

v0.6.29 - 2022-11-07

Added

  • Cache mounts sharing mode can now be specified via RUN --mount type=cache,sharing=shared via CACHE --sharing=shared. Allowed values are locked (default - lock concurrent acccess to the cache), shared (allow concurrent access) and private (create a new empty cache on concurrent access).

Changed

  • Increases the cache limit for local and git sources from 10% to 50% to support copying large files (e.g. binary assets).
  • The default cache mount sharing mode is now locked instead of shared. This means that if you have multiple builds running concurrently, they will block on each other to gain access to the cache mount. If you want to share the cache as it was shared in previous version of Earthly, you can use RUN --mount type=cache,sharing=shared or CACHE --sharing=shared.

Fixed

  • CACHE command was not being correctly used in IF, FOR, ARG and other commands. #2330
  • Fixed buildkit gckeepstorage config value which was was set to 1000 times larger than the cache size, now it is set to the cache size.
  • Fixed Earthly not detecting the correct image digest for some images loaded in WITH DOCKER --load and causing cache not to be bust correctly. #2337 and #2288

v0.6.28 - 2022-10-26

Added

  • A summary of context file transfers is now displayed every 15 seconds.
  • Satellite wake command, which can force a satellite to wake up (useful for calling inspect or other non-build related commands).

Changed

  • WITH DOCKER merging of user specific /etc/docker/daemon.json settings data now applies to arrays (previously only dictionaries were supported).
  • A final warning will be displayed if earthly is terminated due to a interrupt signal (ctrl-c).

Changed

v0.6.27 - 2022-10-17

Changed

  • Support for all ssh-based key types (e.g. ssh-ed25519), and not only ssh-rsa. #1783

Fixed

  • Unable to specify public key to add via the command-line, e.g. running earthly account add-key <key> ignored the key and fell back to an interactive prompt.
  • GIT CLONE command was ignoring the WORK DIR command when --use-copy-link feature was set.

v0.6.26 - 2022-10-13

Added

  • Build failures now show the file and line number of the failing command
  • Introduced EARTHLY_GIT_AUTHOR and EARTHLY_GIT_CO_AUTHORS ARGS

Fixed

  • Some network operations were being incorrectly executed with a timeout of 0.
  • Upon earthly ls failure it will display the failure reason

Changed

  • Loading Docker images as part of WITH DOCKER is now faster through the use of an embedded registry in Buildkit. This functionality was previously hidden (VERSION --use-registry-for-with-docker) and was only auto-enabled for Earthly Satellite users. It is now enabled by default for all builds. #1268

Changed

  • VERSION command is now required.

v0.6.25 - 2022-10-04

Fixed

  • Fixed outputting images with long names #2053
  • Fixed buildkit connection timing out occasionally #2229
  • Cache size was incorrectly displayed (magnitude of 1024 higher)

v0.6.24 - 2022-09-22

Added

  • The earthly org invite command now has the ability to invite multiple email addresses at once.
  • Experimental support for TRY/FINALLY, which allows saving artifacts upon failure. #988, #587. Not that this is only a partial implementation, and only accepts a single RUN command in the TRY, and only SAVE ARTIFACT commands in the FINALLY block.
  • Ability to enable specific satellite features via cli flags, e.g. the new experimental sleep feature can be enabled with earthly satellite launch --feature-flags satellite-sleep my-satellite.

Changed

  • Bootstrapping zsh autocompletion will first attempt to install under /usr/local/share/zsh/site-functions, and will now fallback to /usr/share/zsh/site-functions.
  • The earthly preview org command has been promoted to GA, and is now available under earthly org.
  • earthly sat select with no arguments now prints the current satellite and the usage text.
  • The interactive debugger now connects over the buildkit session connection rather than an unencrypted tcp connection; this makes it possible to use the interactive debugger with remote buildkit instances.

Fixed

  • Fixed Earthly failing when using a remote docker host from a machine with an incompatible architecture. #1895
  • Earthly will no longer race with itself when starting up buildkit. #2194
  • The error reported when failing to initiate a connection to buildkit has been reworded to account for the remote buildkit/satellite case too.
  • Errors related to parsing VERSION feature flags will no longer be displayed during auto-completion.

v0.6.23 - 2022-09-06

Fixed

  • Using --remote-cache on a target that contains only BUILD instructions caused a hang. #1945
  • Fixed WAIT/END related bug which prevent WITH DOCKER --load from building referenced target.
  • Images and artifacts which are output (or pushed), are now displayed in the final earthly output.
  • ssh: parse error in message type 27 error when using OpenSSH 8.9; fixed by upstream in golang/go#51689.

Changed

  • Removed warning stating that WAIT/END code is experimental and may be incomplete -- it is still experimental; however, it now has a higher degree of test-coverage. It can be enabled with VERSION --wait-block 0.6.
  • A warning is now displayed during exporting a multi-platform image to the local host if no platform is found that matches the host's platform type.
  • Reduced verbosity of To enable pushing use earthly --push message.

v0.6.22 - 2022-08-19

Added

  • --cache-from earthly flag, which allows defining multiple ordered caches. #1693
  • WAIT/END support for saving artifacts to local host.
  • WAIT/END support for RUN --push commands.

Fixed

  • Updated EXPOSE parsing to accept (and ignore) host IP prefix, as well as expose udp ports; this should be fully-compatible with dockerfile's format. #1986
  • The earthly-buildkit container is now only initialized when required.

Changed

  • The earthly-buildkit container is now only initialized when required.

v0.6.21 - 2022-08-04

Added

  • EARTHLY_LOCALLY builtin arg which is set to true or false when executing locally or within a container, respectively. This ARG must be enabled with the VERSION --earthly-locally-arg feature flag.

Fixed

  • Fixed an incompatibility with older versions of remote BuildKits and Satellites, which was resulting in Earthly crashing.
  • Fixed WITH DOCKER not loading correctly when the image name contained a port number under VERSION --use-registry-for-with-docker. #2071
  • Race condition in WAIT / END block, which prevented waiting on some BUILD commands.

Changed

  • Added a deprecation warning for secrets using a +secrets/ prefix. Support for this prefix will be removed in a future release.
  • per-file stat transfers are now logged when running under --debug mode.

v0.6.20 - 2022-07-18

Changed

  • Updated buildkit to include changes up to 12cfc87450c8d4fc31c8c0a09981e4c3fb3e4d9f

Added

  • Adding support for saving artifact from --interactive-keep. #1980
  • New EARTHLY_PUSH builtin arg, which is set to true when earthly is run with the --push flag, and the argument is referenced under the direct target, or a target which is indirectly referenced via a BUILD command; otherwise it will be set to false. The value mimics when a RUN --push command is executed. This feature must be enabled with VERSION --wait-block 0.6.

Fixed

  • Fixed context.Canceled being reported as the error in some builds instead of the root cause. #1991
  • Improved cache use of WITH DOCKER command.
  • The earthly/earthly docker image is now also built for arm64 (in addition to amd64).

v0.6.19 - 2022-06-29

Fixed

  • Fixed retagging of images that are made available via the WITH DOCKER command when the --use-registry-for-with-docker feature is enabled.
  • Fixed a bug where earthly --version would display unknown on some versions of Windows.

v0.6.18 - 2022-06-27

Fixed

  • sh: write error: Resource busy error caused by running the earthly/earthly docker image on a cgroups2-enabled host. #1934

v0.6.17 - 2022-06-20

Added

  • Additional debug information for failure during dind cleanup.

v0.6.16 - 2022-06-17

Changed

  • Custom secret_provider is now called with user's env variables.
  • Additional args can be passed to secret_provider, e.g. secret_provider: my-password-manager --db=$HOME/path/to/secrets.db
  • Local registry is enabled by default in the earthly-buildkit container.

v0.6.15 - 2022-06-02

Changed

Added

  • Experimental support for Docker registry based image creation and transfer WITH DOCKER loads and pulls. Enable with the VERSION --use-registry-for-with-docker flag.
  • Git config options for non-standard port and path prefix; these options are incompatible with a custom git substitution regex.
  • Experimental WAIT / END blocks, to allow for finer grain of control between pushing images and running commands.
  • Improved ARG error messages to include the ARG name associated with the error.

Fixed

  • Panic when running earthly --version under some versions of Windows
  • Removed duplicate git commit hash from earthly --version output string (when running dev versions of earthly)
  • Garbled auto-completion when using Earthfiles without a VERSION command (or with other warnings) #1837.
  • Masking of cgroups for podman support.

v0.6.14 - 2022-04-11

Added

  • Experimental support for SAVE IMAGE --no-manifest-list. This option disables creating a multi-platform manifest list for the image, even if the image is created with a non-default platform. This allows the user to create non-native images (e.g. amd64 image on an M1 laptop) that are still compatible with AWS lambda. To enable this feature, please use VERSION --use-no-manifest-list 0.6. #1802
  • Introduced Experimental support for --chmod flag in COPY. To enable this feature, please use VERSION --use-chmod 0.6. #1817
  • Experimental secret_provider config option allows users to provide a script which returns secrets. #1808
  • /etc/ssh/ssh_known_hosts are now passed to buildkit. #1769

Fixed

  • Targets with the same CACHE commands incorrectly shared cached contents. #1805
  • Sometimes local outputs and pushes are skipped mistakenly when a target is referenced both via FROM and via BUILD #1823
  • GIT CLONE failure (makeCloneURL does not support gitMatcher substitution) when used with a self-hosted git repo that was configured under ~/.earthly/config.yml #1757

v0.6.13 - 2022-03-30

Added

  • Earthly now warns when encountering Earthfiles with no VERSION specified. In the future, the VERSION command will be mandatory. #1775

Changed

  • WITH DOCKER now merges changes into /etc/docker/daemon.json rather than overwriting the entire file; this change introduces jq as a dependency, which will be auto-installed if missing.

Fixed

  • The COPY command, when used with LOCALLY was incorrectly ignoring the WORKDIR value. #1792
  • The --shell-out-anywhere feature introduced a bug which interfered with asynchronous builds. #1785
  • EARTHLY_GIT_SHORT_HASH was not set when building a remotely-referenced target. #1787

v0.6.12 - 2022-03-23

Changed

  • A more obvious error is printed if WITH DOCKER starts non-natively. This is not supported and it wasn't obvious before.
  • WITH DOCKER will keep any settings pre-applied in /etc/docker/daemon.json rather than overwriting them.

Added

  • The feature flag --exec-after-build has been enabled retroactively for VERSION 0.5. This speeds up large builds by 15-20%.
  • The feature flag --parallel-load has been enabled for every VERSION. This speeds up by parallelizing targets built for loading via WITH DOCKER --load.
  • VERSION 0.0 is now permitted, however it is only meant for Earthly internal debugging purposes. VERSION 0.0 disables all feature flags.
  • A new experimental mode in which --platform operates. To enable these features in your builds, set VERSION --new-platform 0.6:
    • There is now a distinction between user platform and native platform. The user platform is the platform of the user running Earthly, while the native platform is the platform of the build worker (these can be different when using a remote buildkit)
    • New platform shorthands are provided: --platform=native, --platform=user.
    • New builtin args are available: NATIVEPLATFORM, NATIVEOS, NATIVEARCH, NATIVEVARIANT (these are the equivalent of the USER* and TARGET* platform args).
    • When no platform is provided, earthly will default to the native platform
    • Additionally, earthly now default to native platform for internal operations too (copy operations, git clones etc)
    • Earthly now allows changing the platform in the middle of a target (FROM --platform is not a contradiction anymore). There is a distinction between the "input" platform of a target (the platform the caller passes in) vs the "output" platform (the platform that ends up being the final platform of the image). These can be different if the caller passes BUILD --platform=something +target, but the target starts with FROM --platform=otherthing ....
  • Ability to shell-out in any Earthly command, (e.g. SAVE IMAGE myimage:$(cat version)), as well as in the middle of ARG strings. To enable this feature, use VERSION --shell-out-anywhere 0.6.

Fixed

  • An experimental fix for duplicate output when building images that are loaded via WITH DOCKER --load. This can be enabled via VERSION --no-tar-build-output 0.6.

v0.6.11 - 2022-03-17

Added

  • An experimental feature whereby WITH DOCKER parallelizes building of the images to be loaded has been added. To enable this feature use VERSION --parallel-load 0.6. #1725
  • Added cache_size_pct config option to allow specifying cache size as a percentage of disk space.

Fixed

  • Fixed a duplicate build issue when using IF together with WITH DOCKER #1724
  • Fixed a bug where BUILD --platform=$ARG did not expand correctly
  • Fixed issue preventing use of WITH DOCKER with docker systemd-based images such as kind, when used under hosts with cgroups v2.

v0.6.10 - 2022-03-03

Changed

  • reverted zeroing of mtime change that was introduced in v0.6.9; this restores the behavior of setting modification time to 2020-04-16T12:00. #1712

v0.6.9 - 2022-03-02

Changed

  • Log sharing is enabled by default for logged in users, it can be disabled with earthly config global.disable_log_sharing true.
  • SAVE ARTIFACT ... AS LOCAL now sets mtime of output artifacts to the current time.

Added

  • Earthly is now 15-30% faster when executing large builds #1589
  • Experimental HOST command, which can be used like this: HOST <domain> <ip> to add additional hosts during the execution of your build. To enable this feature, use VERSION --use-host-command 0.6. #1168

Fixed

  • Errors when using inline caching indicating invalid layer index #1635
  • Podman can now use credentials from the default location #1644
  • Podman can now use the local registry cache without modifying registries.conf #1675
  • Podman can now use WITH DOCKER --load inside a target marked as LOCALLY #1675
  • Interactive sessions should now work with rootless configurations that have no apparent external IP address #1573, #1689
  • On native Windows installations, Earthly properly detects the local git path when it's available #1663
  • On native Windows installations, Earthly will properly identify targets in Earthfiles outside of the current directory using the \ file separator #1663
  • On native Windows installations, Earthly will save local artifacts to directories using the \ file separator #1663
  • A parsing error, when using WITH DOCKER --load in conjunction with new-style build args. #1696
  • ENTRYPOINT and CMD were not properly expanding args when used in shell mode.
  • A race condition sometimes caused a Canceled error to be reported, instead of the real error that caused the build to fail

v0.6.8 - 2022-02-16

Fixed

  • RUN --interactive command exit codes were being ignored.
  • RUN --ssh command were failing to create SSH_AUTH_SOCK when run inside a WITH DOCKER. #1672

Changed

  • expanded help text for earthly account register --help.

v0.6.7 - 2022-02-09

Log Sharing (experimental)

This version of Earthly includes an experimental log-sharing feature which will upload build-logs to the cloud when enabled.

To enable this experimental feature, you must first sign up for an earthly account by using the earthly account register command, or by visiting https://ci.earthly.dev/

Once logged in, you must explicitly enable log-sharing by running:

earthly config global.disable_log_sharing false

In a future version, log-sharing will be enabled by default for logged-in users; however, you will still be able to disable it, if needed.

When log-sharing is enabled, you will see a message such as

Share your build log with this link: https://ci.earthly.dev/logs?logId=dc622821-9fe4-4a13-a1db-12680d73c442

as the last line of earthly output.

Fixed

  • GIT CLONE now works with annotated git tags. #1571
  • CACHE command was not working for versions of earthly installed via homebrew.
  • Autocompletion bug when directory has both an Earthfile and subdir containing an earthfile.
  • Autocompletion bug when directory has two subdirectories where one is a prefix of the other.

Changed

  • earthly account logout raises an error when EARTHLY_TOKEN is set.

v0.6.6 - 2022-01-26

Added

  • Ability to change mounted secret file mode. fixes #1434

Changed

  • Permission errors related to reading ~/.earthly/config.yml and .env files are now treated as errors rather than silently ignored (and assuming the file does not exist).
  • Speedup from pre-emptive execution of build steps prior to them being referenced in the build graph.

Fixed

  • earthly panic when running with SUDO_USER pointing to a user the current user did not have read/write permission; notably encountered when running under circleci.

Removed

  • Removed --git-url-instead-of flag, which has been replaced by earthly config git ...

v0.6.5 - 2022-01-24

Added

  • Ability to load a different .env file via the --env-file flag.
  • Added experimental feature than changes the ARGs defined in the +base target to be local, unless defined with a --global flag; To enable this feature use VERSION --explicit-global 0.6.

Changed

  • Updated buildkit to include changes up to 17c237d69a46d61653746c03bcbe6953014b41a5

Fixed

  • failed to solve: image is defined multiple times for the same default platform errors. #1594, #1582
  • failed to solve: image rmi after pull and retag: command failed: docker image rm ...: exit status 1: Error: No such image errors. #1590

v0.6.4 - 2022-01-17

Fixed

  • Duplicate execution occurring when using ARGs. #1572, #1582
  • Overriding builtin ARG value now displays an error (rather than silently ignoring it).

v0.6.3 - 2022-01-12

Changed

  • Updated buildkit to contain changes up to 15fb1145afa48bf81fbce41634bdd36c02454f99 from moby/master.

Added

  • Experimental CACHE command can be used in Earthfiles to optimize the cache in projects that perform better with incremental changes. For example, a Maven project where SNAPSHOT dependencies are added frequently, an NPM project where node_modules change frequently, or programming languages using incremental compilers. #1399
  • Config file entries can be deleted using a --delete flag (for example earthly config global.conversion_parallelism --delete). #1449
  • Earthly now provides the following builtin ARGs: EARTHLY_VERSION and EARTHLY_BUILD_SHA. These will be generally available in Earthly version 0.7+, however, they can be enabled earlier by using the --earthly-version-arg. feature flag #1452
  • Config option to disable known_host checking for specific git hosts by setting strict_host_key_checking to false under the git section of earthly/config.yml (defaults to true).
  • Error check for using both --interactive and --buildkit-host (which are not currently supported together). #1492
  • earthly ls [<project-ref>] to list Earthfile targets.

Fixed

  • Gracefully handle empty string "" being provided as a value to earthly config commands. #1449
  • known_host entries were being ignored when custom pattern and substituted git config options were used (commonly used for self-hosted git repos)
  • Unable to connect to ssh server when known_hosts doesn't contain ssh-rsa host scan, but contains a different key-scan (e.g. ecdsa-sha2-nistp256, ssh-ed25519, etc).
  • When git auth is set to ssh but no user is given, default to current user (similar to calling ssh example.com vs ssh user@example.com).

v0.6.2 - 2021-12-01

Fixed

  • unexpected non-relative path within git dir bug when using case insensitive file systems #1426
  • Unable to access private GitHub repos #1421

v0.6.1 - 2021-11-29

Fixed

  • BUILD arguments containing a subshell ($(...)) were executed twice, and when +base target was empty would result errors such as the first command has to be FROM, FROM DOCKERFILE, LOCALLY, ARG, BUILD or IMPORT #1448
  • TLS error (transport: authentication handshake failed: remote error: tls: no application protocol) when enabling buildkit mTLS #1439
  • Unable to save artifacts to local directory (.) #1422

v0.6.0 - 2021-11-24

This version promotes a number of features that have been previously in Experimental and Beta status. To make use of the features in this version you need to declare VERSION 0.6 at the top of your Earthfile. If a version is not declared, then Earthly's interpreter will assume VERSION 0.5.

If you are not ready to update your scripts to take advantage of VERSION 0.6, then you may upgrade Earthly anyway and your scripts should continue to work as before, provided that they either declare VERSION 0.5 or they don't declare a version at all.

Declaring VERSION 0.6 is equivalent to

VERSION \
  --use-copy-include-patterns \
  --referenced-save-only \
  --for-in \
  --require-force-for-unsafe-saves \
  --no-implicit-ignore \
  0.5

It is recommended to use VERSION 0.6 instead as individual feature flags don't guarantee proper forwards-backwards compatibility. Note, however, that Earthly 0.5.* is not able to run a VERSION 0.6 Earthfile and will return an error.

For more information on the individual Earthfile feature flags see the Earthfile version-specific features page.

Changed

  • What Earthly outputs locally has changed in a way that is not backwards compatible. For an artifact or an image to be produced locally it needs to be part of a BUILD chain (or be part of the target being directly built). Artifacts and images introduced through FROM or COPY are no longer output locally.

    To update existing scripts, you may issue a duplicate BUILD in addition to a FROM (or a COPY), should you wish for the referenced target to perform output.

    For example, the following script

    FROM +some-target
COPY +another-target/my-artifact ./

    could become

    FROM +some-target
BUILD +some-target
COPY +another-target/my-artifact ./
BUILD +another-target

    in order to produce the same outputs.

    For more details see #896.

  • The syntax for passing build args has been changed.

    Earthly v0.5 (old way)

    FROM --build-arg NAME=john +some-target
COPY --build-arg NAME=john +something/my-artifact ./
WITH DOCKER --build-arg NAME=john --load +another-target
  ...
END

    Earthly v0.6 (new way)

    FROM +some-target --NAME=john
COPY (+something/my-artifact --NAME=john) ./
WITH DOCKER --load (+another-target --NAME=john)
  ...
END

    Passing build args on the command-line has also changed similarly:

    Earthly v0.5 (old way)

    earthly --build-arg NAME=john +some-target

    Earthly v0.6 (new way)

    earthly +some-target --NAME=john

    This change is part of the UDC proposal #581. The old way of passing args is deprecated and will be removed in a future version (however, it still works in 0.6).

  • If a SAVE ARTIFACT is unsafe (writing to a directory outside of the Earthfile directory), it'll require the --force flag.
  • .earthlyignore no longer includes any implicit entries like Earthfile or .earthlyignore. These will need to be specified explicitly. #1294
  • Buildkit was updated to d429b0b32606b5ea52e6be4a99b69d67b7c722b2. This includes a number of bug fixes, including eliminating crashes due to panic failed to get edge.

Added

  • Earthly now performs local image outputs to the local Docker daemon through a built-in registry. This speeds up the process drastically as common layers no longer need to be transferred over #500.
  • Earthly now enables additional parallelism to speed up certain operations that were previously serialized #888. Note that this setting was previously controlled by --conversion-parallelism flag or the EARTHLY_CONVERSION_PARALLELISM environment variable while in experimental stage. It has now been moved as part of the Earthly config and has been promoted to GA.
  • COPY transfers are sped up as only the necessary files are sent over to BuildKit #1062.
  • WITH DOCKER has been promoted to GA #576.
  • FROM DOCKERFILE has been promoted to GA.
  • LOCALLY has been promoted to GA #580.
  • RUN --interactive and RUN --interactive-keep have been promoted to GA #693.
  • IF and FOR have been promoted to GA #779.
  • Support for Apple Silicon M1 has been promoted to GA #722.
  • Multi-platform builds have been promoted to GA #536.
  • Mounting secrets as files have been promoted as GA #579.
  • VERSION has been promoted to GA #991
  • User-defined commands (UDCs) have been promoted to GA #581.
  • Allow running SAVE ARTIFACT after RUN --push is now GA #586.
  • SAVE ARTIFACT --if-exists and COPY --if-exists have been promoted to GA #588.
  • Shared cache and --ci mode are now GA #11.
  • New builtin args USERPLATFORM, USEROS, USERARCH, and USERVARIANT which represent the platform, OS, architecture, and processor variant of the system Earthly is being called from #1251. Thanks to @akrantz01 for the contribution!
  • Config option for buildkit's max_parallelism configuration. Use this to increase parallelism for faster builds or decrease parallelism when resources are constraint. The default is 20. #1308
  • Support for required ARGs (ARG --required foo) #904. Thanks to @camerondurham for the contribution!
  • Extended auto-completion to be build-arg aware. Typing earthly +my-target --<tab><tab> now prints possible build-args specific to +my-target. #1330.
  • The console output now has an improved structure #1226.

Fixed

  • Eliminated some spurious warnings (ReadDataPacket failed, Failed to connect to terminal, failed to read from stdin and others) #1241.
  • Minor fixes related to the experimental Podman support #1239.
  • Improved some error messages related to frontend detection #1250.
  • Fixed Podman's ability to load OCI images #1287.
  • Fixed homebrew installation on macOS 12. #1370, homebrew/earthly#13
  • failed due to failed to autodetect a supported frontend errors will now include underlying reason for failure
  • Cache export was not honoring EARTHLY_MAX_REMOTE_CACHE setting.
  • Buildkit logs were not being sent to earthly-buildkitd container's output.
  • kind required permissions were not available in earthly-buildkitd.

v0.6.0-rc3 - 2021-11-15

Fixed

  • cache export was not honoring EARTHLY_MAX_REMOTE_CACHE setting
  • buildkit logs were not being sent to earthly-buildkitd container's output.
  • kind required permissions were not available in earthly-buildkitd.

Changed

  • docker and fsutils versions were set to match versions defined in earthly's buildkit fork.

v0.6.0-rc2 - 2021-11-01

Fixed

  • failed due to failed to autodetect a supported frontend errors will now include underlying reason for failure

Changed

  • Buildkit was updated to d47b46cf2a16ca80a958384282e8028285b1866d.

v0.6.0-rc1 - 2021-10-28

This version promotes a number of features that have been previously in Experimental and Beta status. To make use of the features in this version you need to declare VERSION 0.6 at the top of your Earthfile. If a version is not declared, then Earthly's interpreter will assume VERSION 0.5.

If you are not ready to update your scripts to take advantage of VERSION 0.6, then you may upgrade Earthly anyway and your scripts should continue to work as before, provided that they either declare VERSION 0.5 or they don't declare a version at all.

Declaring VERSION 0.6 is equivalent to

VERSION \
  --use-copy-include-patterns \
  --referenced-save-only \
  --for-in \
  --require-force-for-unsafe-saves \
  --no-implicit-ignore \
  0.5

It is recommended to use VERSION 0.6 instead as individual feature flags don't guarantee proper forwards-backwards compatibility. Note, however, that Earthly 0.5.* is not able to run a VERSION 0.6 Earthfile and will return an error.

For more information on the individual Earthfile feature flags see the Earthfile version-specific features page.

Added

  • Earthly now performs local image outputs to the local Docker daemon through a built-in registry. This speeds up the process drastically as common layers no longer need to be transferred over #500.
  • Earthly now enables additional parallelism to speed up certain operations that were previously serialized #888. Note that this setting was previously controlled by --conversion-parallelism flag or the EARTHLY_CONVERSION_PARALLELISM environment variable while in experimental stage. It has now been moved as part of the Earthly config and has been promoted to GA.
  • COPY transfers are sped up as only the necessary files are sent over to BuildKit #1062.
  • WITH DOCKER has been promoted to GA #576.
  • FROM DOCKERFILE has been promoted to GA.
  • Support for Apple Silicon M1 has been promoted to GA #722.
  • Multi-platform builds have been promoted to GA #536.
  • Mounting secrets as files have been promoted as GA #579.
  • VERSION has been promoted to GA #991
  • User-defined commands (UDCs) have been promoted to GA #581.
  • Allow running SAVE ARTIFACT after RUN --push is now GA #586.
  • SAVE ARTIFACT --if-exists and COPY --if-exists have been promoted to GA #588.
  • Shared cache and --ci mode are now GA #11.
  • LOCALLY has been promoted to GA #580.
  • RUN --interactive and RUN --interactive-keep have been promoted to GA #693.
  • IF and FOR have been promoted to GA #779.
  • If a SAVE ARTIFACT is unsafe (writing to a directory outside of the Earthfile directory), it'll require the --force flag.
  • .earthlyignore no longer includes any implicit entries like Earthfile or .earthlyignore. These will need to be specified explicitly. #1294
  • The console output now has an improved structure #1226.
  • Fixed homebrew installation on macOS 12. #1370, homebrew/earthly#13

Changed

  • What Earthly outputs locally has changed in a way that is not backwards compatible. For an artifact or an image to be produced locally it needs to be part of a BUILD chain (or be part of the target being directly built). Artifacts and images introduced through FROM or COPY are no longer output locally.

    To update existing scripts, you may issue a duplicate BUILD in addition to a FROM (or a COPY), should you wish for the referenced target to perform output.

    For example, the following script

    FROM +some-target
COPY +another-target/my-artifact ./

    could become

    FROM +some-target
BUILD +some-target
COPY +another-target/my-artifact ./
BUILD +another-target

    in order to produce the same outputs.

    For more details see #896.

  • The syntax for passing build args has been changed.

    Earthly v0.5 (old way)

    FROM --build-arg NAME=john +some-target
COPY --build-arg NAME=john +something/my-artifact ./
WITH DOCKER --build-arg NAME=john --load +another-target
  ...
END

    Earthly v0.6 (new way)

    FROM +some-target --NAME=john
COPY (+something/my-artifact --NAME=john) ./
WITH DOCKER --load (+another-target --NAME=john)
  ...
END

    Passing build args on the command-line has also changed similarly:

    Earthly v0.5 (old way)

    earthly --build-arg NAME=john +some-target

    Earthly v0.6 (new way)

    earthly +some-target --NAME=john

    This change is part of the UDC proposal #581. The old way of passing args is deprecated and will be removed in a future version (however, it still works in 0.6).

  • Add builtin args USERPLATFORM, USEROS, USERARCH, and USERVARIANT which represent the platform, OS, architecture, and processor variant of the system Earthly is being called from #1251. Thanks to @akrantz01 for the contribution!
  • Support for required ARGs (ARG --required foo) #904. Thanks to @camerondurham for the contribution!
  • Add a config item for buildkit's max_parallelism configuration. Use this to increase parallelism for faster builds or decrease parallelism when resources are constraint. The default is 20. #1308
  • Extend auto-completion to be build-arg aware. Typing earthly +my-target --<tab><tab> now prints possible build-args specific to +my-target. #1330.
  • Buildkit was updated to d429b0b32606b5ea52e6be4a99b69d67b7c722b2. This includes a number of bug fixes, including eliminating crashes due to panic failed to get edge.

Fixed

  • Eliminated some spurious warnings (ReadDataPacket failed, Failed to connect to terminal, failed to read from stdin and others) #1241.
  • Minor fixes related to the experimental Podman support #1239.
  • Improved some error messages related to frontend detection #1250.
  • Fixed Podman's ability to load OCI images #1287.

v0.5.24 - 2021-09-30

Added

  • New --output flag, which forces earthly to enable outputs, even when running under --ci mode #1200.
  • Experimental support for Podman #760.
  • Automatically adds compatibility arguments for cases where docker is running under user namespaces.

Fixed

  • Removed spurious BuildKit and Local Registry URLs are pointed at different hosts (earthly-buildkitd vs. 127.0.0.1) warning.
  • Scrub git credentials when running under --debug mode.
  • "FROM DOCKERFILE" command was ignoring the path (when run on a remote target), which prevented including dockerfiles which were named something else.
  • Removed the creation of a temporary output directory when run in --no-output mode, or when building targets that don't output artifacts, the temporary directory is now created just before it is needed.
  • Fixed race condition involving WITH DOCKER and IF statements, which resulted in failed to solve: NotFound: no access allowed to dir errors.

v0.5.23 - 2021-08-24

  • introduced COPY --if-exists which allows users to ignore errors which would have occurred if the file did not exist.
  • introduced new ip_tables config option for controlling which iptables binary is used; fixes #1160
  • introduced warning message when saving to paths above the current directory of the current Earthfile; these warnings will eventually become errors unless the --force flag is passed to SAVE ARTIFACT.
  • fixed remote BuildKit configuration options being ignored; fixes #1177
  • suppressed erroneous internal-term error messages which occurred when running under non-interactive ( e.g. --ci ) modes; fixes #1108
  • changed help text for --artifact mode
  • deb and yum packages no longer clear the earthly cache on upgrades

v0.5.22 - 2021-08-11

  • when running under --ci mode, earthly now raises an error if a user attempts to use the interactive debugger
  • updated underlying BuildKit version
  • print all request and responses to BuildKit when running under --debug mode
  • support for specifying files to ignore under .earthlyignore in addition to .earthignore; an error is raised if both exist
  • new ARG EARTHLY_GIT_SHORT_HASH will contain an 8 char representation of the current git commit hash
  • new ARG EARTHLY_GIT_COMMIT_TIMESTAMP will contain the timestamp of the current git commit
  • new ARG EARTHLY_SOURCE_DATE_EPOCH will contain the same value as EARTHLY_GIT_COMMIT_TIMESTAMP or 0 when the timestamp is not available
  • only directly referenced artifacts or images will be saved when the VERSION's --referenced-save-only feature flag is defined #896
  • experimental support for FOR statements, when the VERSION's --for-in feature flag is defined #1142
  • fixes bug where error was not being repeated as the final output
  • fixes bug where HTTPS-based git credentials were leaked to stdout

v0.5.20 - 2021-07-22

  • Support for passing true/false values to boolean flags #1109
  • fixes error that stated http is insecure when configuring a HTTPS git source. #1115

v0.5.19 - 2021-07-21

  • Improved selective file-transferring via BuildKit's include patterns; this feature is currently disabled by default, but can be enabled by including the --use-copy-include-patterns feature-flag in the VERSION definition (e.g. add VERSION --use-copy-include-patterns 0.5 to the top of your Earthfiles). This will become enabled by default in a later version.
  • Support for host systems that have nf_tables rather than ip_tables.
  • Show hidden dev flags when EARTHLY_AUTOCOMPLETE_HIDDEN="1" is set (or when running a custom-built version).
  • Improved crash logs.

v0.5.18 - 2021-07-08

  • Added a --symlink-no-follow flag to allow copying invalid symbolic links (earthly#1067)
  • Updated BuildKit, which contains a fix for "failed to get edge" panic errors (earthly#1016)
  • Fix bug that prevented using an absolute path to reference targets which contained relative imports
  • Added option to disable analytics data collection when environment variables EARTHLY_DISABLE_ANALYTICS or DO_NOT_TRACK are set.
  • Include version and help flags in autocompletion output.

v0.5.17 - 2021-06-15

  • Begin experimental official support for earthly/earthly and earthly/buildkitd images; including a new entrypoint for earthly/earthly (earthly#1050)
  • When running in verbose mode, log all files sent to BuildKit (earthly#1051, earthly#1056)
  • Adjust deb and rpm packages to auto-install the shell completions though post-installation mechanisms (earthly#1019, earthly#1057)

v0.5.16 - 2021-06-03

  • fixes handling of Error getting earthly dir lookup failures which prevents earthly from running (earthly#1026)
  • implements ability to perform local exports via buildkit-hosted local registry in order to speed up exports; the feature is currently disabled by default but can be enabled with earthly config global.local_registry_host 'tcp://127.0.0.1:8371' (earthly#500)

v0.5.15 - 2021-05-27

  • earthly config is no longer experimental. (earthly#979)
  • Running a target, will now bootstrap automatically, if it looks like earthly bootstrap has not been run yet. (earthly#989)
  • earthly bootstrap ensures the permissions on the .earthly folder are correct (belonging to the user) ( earthly#993)
  • Cache mount ID now depends on a target input hash which does not include inactive variables (earthly#1000)
  • Added EARTHLY_TARGET_PROJECT_NO_TAG built-in argument (earthly#1011)
  • When ~ is used as the path to a secret file, it now expands as expected. (earthly#977)
  • Use the environment-specified $HOME, unless $SUDO_USER is set. If it is, use the users home directory. (earthly#1015)

v0.5.14 - 2021-05-27

  • earthly config is no longer experimental. (earthly#979)
  • Running a target, will now bootstrap automatically, if it looks like earthly bootstrap has not been run yet. (earthly#989)
  • earthly bootstrap ensures the permissions on the .earthly folder are correct (belonging to the user) ( earthly#993)
  • Cache mount ID now depends on a target input hash which does not include inactive variables (earthly#1000)
  • Added EARTHLY_TARGET_PROJECT_NO_TAG built-in argument (earthly#1011)
  • When ~ is used as the path to a secret file, it now expands as expected. (earthly#977)

v0.5.13 - 2021-05-13

  • fixes panic on invalid (or incomplete) ~/.netrc file (earthly#980)

v0.5.12 - 2021-05-07

  • Adds a retry for remote BuildKit hosts when using the EARTHLY_BUILDKIT_HOST configuration option. (#952)
  • Re-fetch credentials when they expire (#957)
  • Make use of ~/.netrc credentials when no config is set under ~/.earthly/config.yml (#964)
  • Make use of auth credentials when performing a GIT CLONE command within an Earthfile. (#964)
  • Improved error output when desired secret does not exist, including the name of the missing secret. (#972)
  • Warn if build-arg appears after the target in CLI invocations.(#959)

v0.5.11 - 2021-04-27

  • Support for FROM DOCKERFILE -f (earthly#950)
  • Fixes missing access to global arguments in user defined commands (earthly#947)
  • Users's ~/.earthly directory is now referenced when earthly is invoked with sudo

v0.5.10 - 2021-04-19

  • Added ability to run WITH DOCKER under LOCALLY (earthly#840)
  • Fix FROM DOCKERFILE --build-args not being passed correctly (earthly#932)
  • Docs: Add uninstall instructions
  • Docs: Improve onboarding tutorial based on user feedback

v0.5.9 - 2021-04-05

  • [experimental] Improved parallelization when using commands such as IF, WITH DOCKER, FROM DOCKERFILE, ARG X=$(...) and others. To enable this feature, pass --conversion-parallelism=5 or set EARTHLY_CONVERSION_PARALLELISM=5. (earthly#888)
  • Auto-detect MTU (earthly#847)
  • MTU may set via config earthly config global.cni_mtu 12345 (earthly#906)
  • Hide --debug flag since it is only used for development on Earthly itself
  • Download and start buildkitd as part of the earthly bootstrap command
  • Improved buildkitd startup logic (earthly#892)
  • Check for reserved target names and disallow them (e.g. +base) (earthly#898)
  • Fix use of self-hosted repositories when a subdirectory is used (earthly#897)

v0.5.8 - 2021-03-23

  • [experimental] Support for ARGs in user-defined commands (UDCs). UDCs are templates (much like functions in regular programming languages), which can be used to define a series of steps to be executed in sequence. In other words, it is a way to reuse common build steps in multiple contexts. This completes the implementation of UDCs and the feature is now in experimental phase (earthly#581). For more information see the UDC guide.
  • [experimental] New command: IMPORT (earthly#868) 
    IMPORT github.com/foo/bar:v1.2.3
IMPORT github.com/foo/buz:main AS zulu

...

FROM bar+target
BUILD zulu+something
  • Fix handling of some escaped quotes (earthly#859)
  • Fix: empty targets are now valid (earthly#872)
  • Fix some line continuation issues (earthly#873 & earthly#874)
  • Earthly now limits parallelism to 20. This fixes some very large builds attempting to use resources all at the same time
  • Automatically retry TLS handshake timeout errors

v0.5.7 - 2021-03-13

  • raise error when duplicate target names exists in Earthfile
  • basic user defined commands (experimental)
  • cleans up console output for saving artifacts (#848)
  • implement support for WORKDIR under LOCALLY targets
  • fix zsh autocompletion issue for mac users If the autocompletion bug persists for anyone (e.g. seeing an error like command not found: __earthly__), and the issues persists after upgrading to v0.5.7; it might be necessary to delete the _earthly autocompletion file before re-running earthly bootstrap (or alternatively manually replace __earthly__ with the full path to the earthly binary).

v0.5.6 - 2021-03-09

  • This release removes the ongoing updates "Provide intermittent updates on long-running targets (#844)" from the previous release, as it has issues in the interactive mode.

v0.5.5 - 2021-03-08

  • Keep .git directory in build context. (#815 )
  • Wait extra time for buildkitd to start if the cache is larger than 30 GB (#827)
  • Experimental: Allow RUN commands to open an interactive session (RUN --interactive), with the option to save the manual changes into the final image (RUN --interactive-keep) (#833)
  • Provide intermittent updates on long-running targets (#844)
  • Fix ZSH autocompletion in some instances (#838)

v0.5.4 - 2021-02-26

  • New experimental --strict flag, which doesn't allow the use of LOCALLY. --strict is now implied when using --ci. (earthly#801)
  • Add help text when issuing earthly config <item> --help. Improved user experience. (earthly#814)
  • Detect if the build doesn't start with a FROM-like command and return a meaningful error. Previously FROM scratch was assumed automatically. (earthly#807)
  • Fix an issue where .tmpXXXXX directories were created in the current directory (earthly#821)
  • Fix auto-complete in zsh (earthly#811)
  • Improved startup logic for BuildKit daemon, which speeds up some rare edge cases (earthly#808)
  • Print BuildKit logs if it crashes or times out on startup (earthly#819)
  • Create config path if it's missing (earthly#812)

v0.5.3 - 2021-02-24

  • Support for conditional logic using new IF, ELSE IF, and ELSE keywords (required for #779)
  • Support for copying artifacts to LOCALLY targets (required for #580)

Fixed

  • segfault when no output or error is displayed (fixes #798)
  • unable to run earthly in docker container with mounted host-docker socket (fixes #791)
  • ./.tmp-earthly-outXXXXXX temp files are now stored under ./.tmp-earthly-out/tmpXXXXXX and are correctly excluded from the build context

v0.5.2 - 2021-02-18

  • New experimental command for editing the Earthly config (earthly#675)
  • SAVE IMAGE --push after a RUN --push now includes the effects of the RUN --push too (earthly#754)
  • Improved syntax errors when parsing Earthfiles
  • Improved error message when QEMU is missing
  • Fix earthly-linux-arm64 binary - was a Mac binary by mistake (earthly#789)
  • Fix override of build arg not being detected properly (earthly#790)
  • Fix image export error when it doesn't contain any RUN commands (earthly#782)

v0.5.1 - 2021-02-08

  • Support for SAVE ARTIFACT under LOCALLY contexts; this allows one to run a command locally and save the output to a different container.
  • Support for build arg matrix; supplying multiple --build-args for the same value will cause the BUILD target to be built for each different build arg value.
  • Improvements for Apple M1 support
  • Improved errors when parsing invalid Earthfiles (to enable the new experimental code, set the EARTHLY_ENABLE_AST variable to true)

v0.5.0 - 2021-02-01

  • Switch to BSL license. For more information about this decision, take a look at our blog post.
  • --platform setting is now automatically propagated between Earthfiles. In addition, you can now specify the empty string --platform= to automatically detect your system's architecture.
  • earthly/dind images now available for linux/arm/v7 and linux/arm64
  • Improved visibility of platform used for each build step, as well as for any build args that have been overridden.
  • Allow saving an artifact after a RUN --push (earthly#735)
  • Allow specifying --no-cache for a single RUN command (earthly#585)
  • There are now separate SUCCESS lines for each of the two possible phases of an earthly run: main and push.
  • Support of popular cloud registries for the experimental shared cache feature is now properly documented
  • Fix SAVE IMAGE --cache-hint not working correctly (earthly#744)
  • Fix i/o timeout errors being cached and requiring BuildKit restart
  • Experimental support for running commands on the host system via LOCALLY (earthly#580)
  • Bug fixes for Apple Silicon. earthly-darwin-arm64 binary is now available. Please treat this version as highly experimental for now. (earthly#722)

v0.5.0-rc2 - 2021-02-01

  • No details provided

v0.5.0-rc1 - 2021-02-01

  • No details provided

v0.4.6 - 2021-01-29

  • No details provided

v0.4.5 - 2021-01-13

  • Fix inconsistent COPY --dir behavior #705
  • Fix AS LOCAL behavior with directories #703

v0.4.4 - 2021-01-06

  • Improved experimental support for arm-based platforms, including Apple M1. Builds run natively on arm platforms now. (For Apple M1, you need to use darwin-amd64 download and have Rosetta 2 installed - the build steps themselves will run natively, however, via the BuildKit daemon).
  • Add SAVE ARTIFACT --if-exists (earthly#588)
  • Fix an issue where comments at the end of the Earthfile were not allowed (earthly#681)
  • Fix an issue where multiple WITH DOCKER --load with the same target, but different image tag were not working (earthly#685)
  • Fix an issue where SAVE ARTIFACT ./* AS LOCAL was flattening subdirectories (earthly#689)
  • Binaries for arm5 and arm6 are no longer supported

v0.4.3 - 2020-12-23

v0.4.2 - 2020-12-22

  • fixed: EARTHLY_GIT_PROJECT_NAME contained the raw git URL when HTTPS-based auth was used (fixes #671)
  • feature: support for mounting secrets as files rather than environment variables
  • feature: experimental support for multi-platform builds
  • misc: sending anonymized usage metrics to earthly