Skip to content

Commit 9bc64ca

Browse files
ladyadaladyada
authored
Merge pull request adafruit#1288 from ladyada/master
BSEC BME680 demo
2 parents 67e8073 + 7768399 commit 9bc64ca

File tree

4 files changed

+155
-4
lines changed

4 files changed

+155
-4
lines changed

‎Adafruit_ESP32_Arduino_Demos/SerialESPPassthrough/SerialESPPassthrough.ino

Lines changed: 3 additions & 3 deletions
Original file line numberDiff line numberDiff line change
@@ -75,12 +75,12 @@ unsigned long baud = 115200;
7575
#endif
7676

7777
#if defined(ADAFRUIT_PYPORTAL)
78-
#define NEOPIXEL_PIN 2
78+
#define PIN_NEOPIXEL 2
7979
#elif defined(ADAFRUIT_METRO_M4_AIRLIFT_LITE)
80-
#define NEOPIXEL_PIN 40
80+
#define PIN_NEOPIXEL 40
8181
#endif
8282

83-
Adafruit_NeoPixel pixel = Adafruit_NeoPixel(1, NEOPIXEL_PIN, NEO_GRB + NEO_KHZ800);
83+
Adafruit_NeoPixel pixel = Adafruit_NeoPixel(1, PIN_NEOPIXEL, NEO_GRB + NEO_KHZ800);
8484

8585
void setup() {
8686
Serial.begin(baud);

‎BME680_BSEC_OLED_Demo/.trinket_m0.test.only

Whitespace-only changes.

‎BME680_BSEC_OLED_Demo/BME680_BSEC_OLED_Demo.ino

Lines changed: 151 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,151 @@
1+
/***************************************************************************
2+
This is a library for the BME680 gas, humidity, temperature & pressure sensor
3+
4+
Designed specifically to work with the Adafruit BME680 Breakout
5+
----> http://www.adafruit.com/products/3660
6+
7+
These sensors use I2C or SPI to communicate, 2 or 4 pins are required
8+
to interface.
9+
10+
Adafruit invests time and resources providing this open source code,
11+
please support Adafruit and open-source hardware by purchasing products
12+
from Adafruit!
13+
14+
Written by Limor Fried & Kevin Townsend for Adafruit Industries.
15+
BSD license, all text above must be included in any redistribution
16+
***************************************************************************/
17+
18+
#include <Adafruit_SSD1306.h>
19+
#include "bsec.h"
20+
21+
Adafruit_SSD1306 display = Adafruit_SSD1306(128, 64, &Wire);
22+
23+
Bsec iaqSensor;
24+
String output;
25+
26+
27+
void setup() {
28+
Serial.begin(9600);
29+
//while (!Serial);
30+
31+
Serial.println(F("BME680 test"));
32+
33+
// SSD1306_SWITCHCAPVCC = generate display voltage from 3.3V internally
34+
if (!display.begin(SSD1306_SWITCHCAPVCC, 0x3D)) { // Address 0x3D for 128x64
35+
Serial.println(F("SSD1306 allocation failed"));
36+
for(;;); // Don't proceed, loop forever
37+
}
38+
Serial.println("OLED begun");
39+
40+
display.display();
41+
delay(100);
42+
display.clearDisplay();
43+
display.display();
44+
display.setTextSize(1);
45+
display.setTextColor(SSD1306_WHITE);
46+
display.setRotation(0);
47+
48+
iaqSensor.begin(BME680_I2C_ADDR_SECONDARY, Wire);
49+
output = "\nBSEC library version " + String(iaqSensor.version.major) + "." + String(iaqSensor.version.minor) + "." + String(iaqSensor.version.major_bugfix) + "." + String(iaqSensor.version.minor_bugfix);
50+
Serial.println(output);
51+
checkIaqSensorStatus();
52+
bsec_virtual_sensor_t sensorList[10] = {
53+
BSEC_OUTPUT_RAW_TEMPERATURE,
54+
BSEC_OUTPUT_RAW_PRESSURE,
55+
BSEC_OUTPUT_RAW_HUMIDITY,
56+
BSEC_OUTPUT_RAW_GAS,
57+
BSEC_OUTPUT_IAQ,
58+
BSEC_OUTPUT_STATIC_IAQ,
59+
BSEC_OUTPUT_CO2_EQUIVALENT,
60+
BSEC_OUTPUT_BREATH_VOC_EQUIVALENT,
61+
BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_TEMPERATURE,
62+
BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_HUMIDITY,
63+
};
64+
65+
iaqSensor.updateSubscription(sensorList, 10, BSEC_SAMPLE_RATE_LP);
66+
checkIaqSensorStatus();
67+
// Print the header
68+
output = "Timestamp [ms], raw temperature [°C], pressure [hPa], raw relative humidity [%], gas [Ohm], IAQ, IAQ accuracy, temperature [°C], relative humidity [%], Static IAQ, CO2 equivalent, breath VOC equivalent";
69+
Serial.println(output);
70+
}
71+
72+
void loop() {
73+
display.setCursor(0,0);
74+
display.clearDisplay();
75+
76+
unsigned long time_trigger = millis();
77+
if (! iaqSensor.run()) { // If no data is available
78+
checkIaqSensorStatus();
79+
return;
80+
}
81+
82+
output = String(time_trigger);
83+
output += ", " + String(iaqSensor.rawTemperature);
84+
output += ", " + String(iaqSensor.pressure);
85+
output += ", " + String(iaqSensor.rawHumidity);
86+
output += ", " + String(iaqSensor.gasResistance);
87+
output += ", " + String(iaqSensor.iaq);
88+
output += ", " + String(iaqSensor.iaqAccuracy);
89+
output += ", " + String(iaqSensor.temperature);
90+
output += ", " + String(iaqSensor.humidity);
91+
output += ", " + String(iaqSensor.staticIaq);
92+
output += ", " + String(iaqSensor.co2Equivalent);
93+
output += ", " + String(iaqSensor.breathVocEquivalent);
94+
Serial.println(output);
95+
96+
97+
Serial.print("Temperature = "); Serial.print(iaqSensor.temperature); Serial.println(" *C");
98+
display.print("Temperature: "); display.print(iaqSensor.temperature); display.println(" *C");
99+
100+
Serial.print("Pressure = "); Serial.print(iaqSensor.pressure / 100.0); Serial.println(" hPa");
101+
display.print("Pressure: "); display.print(iaqSensor.pressure / 100); display.println(" hPa");
102+
103+
Serial.print("Humidity = "); Serial.print(iaqSensor.humidity); Serial.println(" %");
104+
display.print("Humidity: "); display.print(iaqSensor.humidity); display.println(" %");
105+
106+
Serial.print("IAQ = "); Serial.print(iaqSensor.staticIaq); Serial.println("");
107+
display.print("IAQ: "); display.print(iaqSensor.staticIaq); display.println("");
108+
109+
Serial.print("CO2 equiv = "); Serial.print(iaqSensor.co2Equivalent); Serial.println("");
110+
display.print("CO2eq: "); display.print(iaqSensor.co2Equivalent); display.println("");
111+
112+
Serial.print("Breath VOC = "); Serial.print(iaqSensor.breathVocEquivalent); Serial.println("");
113+
display.print("VOC: "); display.print(iaqSensor.breathVocEquivalent); display.println("");
114+
115+
Serial.println();
116+
display.display();
117+
delay(2000);
118+
}
119+
120+
121+
// Helper function definitions
122+
void checkIaqSensorStatus(void)
123+
{
124+
if (iaqSensor.status != BSEC_OK) {
125+
if (iaqSensor.status < BSEC_OK) {
126+
output = "BSEC error code : " + String(iaqSensor.status);
127+
Serial.println(output);
128+
display.setCursor(0,0);
129+
display.println(output);
130+
display.display();
131+
for (;;) delay(10);
132+
} else {
133+
output = "BSEC warning code : " + String(iaqSensor.status);
134+
Serial.println(output);
135+
}
136+
}
137+
138+
if (iaqSensor.bme680Status != BME680_OK) {
139+
if (iaqSensor.bme680Status < BME680_OK) {
140+
output = "BME680 error code : " + String(iaqSensor.bme680Status);
141+
Serial.println(output);
142+
display.setCursor(0,0);
143+
display.println(output);
144+
display.display();
145+
for (;;) delay(10);
146+
} else {
147+
output = "BME680 warning code : " + String(iaqSensor.bme680Status);
148+
Serial.println(output);
149+
}
150+
}
151+
}

‎library.deps

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -1 +1 @@
1-
depends=Adafruit ILI9341, Adafruit BusIO, SD, Adafruit NeoPixel, Adafruit VS1053 Library, Adafruit BluefruitLE nRF51, Adafruit seesaw Library, Ethernet, Adafruit IO Arduino, FastLED, Adafruit LiquidCrystal, Adafruit SoftServo, TinyWireM, Adafruit AM radio library, WaveHC, Adafruit LED Backpack Library, MAX31850 OneWire, Adafruit VC0706 Serial Camera Library, RTClib, Adafruit SleepyDog Library, Adafruit Thermal Printer Library, Adafruit Zero I2S Library, Adafruit EPD, Adafruit SSD1351 library, Adafruit FONA Library, Adafruit Motor Shield V2 Library, Adafruit NeoMatrix, Adafruit Soundboard library, Adafruit Circuit Playground, ArduinoJson, Adafruit TCS34725, Adafruit Pixie, Adafruit GPS Library, TinyGPS, WiFi101, Adafruit DotStar, Adafruit Si7021 Library, Adafruit WS2801 Library, Mouse, Keyboard, Time, IRremote, Adafruit LSM9DS0 Library, Adafruit Arcada Library, MIDIUSB, PubSubClient, Adafruit LIS2MDL, Adafruit NeoPXL8, Adafruit MCP23017 Arduino Library, Adafruit MLX90640, LiquidCrystal, Adafruit NeoTrellis M4 Library, RGB matrix Panel, Adafruit MLX90614 Library, Adafruit RGB LCD Shield Library, MAX6675 library, Adafruit MP3, Adafruit Keypad, Adafruit Arcada GifDecoder, Keypad, Neosegment, Encoder, Adafruit TiCoServo, Adafruit Trellis Library, FauxmoESP, Adafruit LSM303 Accel, Adafruit LSM303DLH Mag, CapacitiveSensor, Adafruit Zero PDM Library, Adafruit DMA neopixel library, elapsedMillis, DST RTC, Adafruit SHARP Memory Display, Adafruit SPIFlash
1+
depends=Adafruit ILI9341, Adafruit BusIO, SD, Adafruit NeoPixel, Adafruit VS1053 Library, Adafruit BluefruitLE nRF51, Adafruit seesaw Library, Ethernet, Adafruit IO Arduino, FastLED, Adafruit LiquidCrystal, Adafruit SoftServo, TinyWireM, Adafruit AM radio library, WaveHC, Adafruit LED Backpack Library, MAX31850 OneWire, Adafruit VC0706 Serial Camera Library, RTClib, Adafruit SleepyDog Library, Adafruit Thermal Printer Library, Adafruit Zero I2S Library, Adafruit EPD, Adafruit SSD1351 library, Adafruit FONA Library, Adafruit Motor Shield V2 Library, Adafruit NeoMatrix, Adafruit Soundboard library, Adafruit Circuit Playground, ArduinoJson, Adafruit TCS34725, Adafruit Pixie, Adafruit GPS Library, TinyGPS, WiFi101, Adafruit DotStar, Adafruit Si7021 Library, Adafruit WS2801 Library, Mouse, Keyboard, Time, IRremote, Adafruit LSM9DS0 Library, Adafruit Arcada Library, MIDIUSB, PubSubClient, Adafruit LIS2MDL, Adafruit NeoPXL8, Adafruit MCP23017 Arduino Library, Adafruit MLX90640, LiquidCrystal, Adafruit NeoTrellis M4 Library, RGB matrix Panel, Adafruit MLX90614 Library, Adafruit RGB LCD Shield Library, MAX6675 library, Adafruit MP3, Adafruit Keypad, Adafruit Arcada GifDecoder, Keypad, Neosegment, Encoder, Adafruit TiCoServo, Adafruit Trellis Library, FauxmoESP, Adafruit LSM303 Accel, Adafruit LSM303DLH Mag, CapacitiveSensor, Adafruit Zero PDM Library, Adafruit DMA neopixel library, elapsedMillis, DST RTC, Adafruit SHARP Memory Display, Adafruit SPIFlash, BSEC Software Library

0 commit comments

Comments
 (0)