[BUG]: SUP M3 boots MiyooCFW 2.0.0, but it fails evidently to be detected

[kiselev-mikhail]

Version

2.0.0 (Dev_build) nigthly

Version type

uClibc (compatible)

Version hash

CFW=cb837c7

Issue description

Upon power on, SUP M3 shows an upside-down logo in inverted colors.
Then some text messages are flashed for a second or two.
The SUP gets auto-dected as UNKNOWN.
License agreement asks for acknowledgement.
As the system won't respond to controls,
30 seconds run out and the console shuts down automatically.

N.B.: I don't know which version my M3 is
(and don't know how to recognize one),
thus I chose both in the issue description prompt,
however the SUP in question does have an Allwinner F1C100S CPU.

Steps to reproduce

1. Prepare and flash a microSD card with MiyooCFW.
2. Put the card into the console.
3. Power SUP on.

What device are you using?

Sup M3 v1, Sup M3 v2

Relevant log outputs

The contents of the uEnv.txt read:

CONSOLE_PARAMETERS=debug=1
CONSOLE_VARIANT=unknown
CONSOLE_VIDEO=r61520fb.ko
DETECTED_VERSION=UNKNOWN
READID_0x00=00 00 93 05
READID_0x04=00 00 93 00
arch=arm
baudrate=115200
board=sunxi
board_name=sunxi
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
boot_device=mmc0
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf}
boot_net_usb_start=usb start
boot_prefixes=/ /boot/
boot_script_dhcp=boot.scr.uimg
boot_scripts=boot.scr.uimg boot.scr
boot_syslinux_conf=extlinux/extlinux.conf
boot_targets=fel mmc_auto usb0 
bootargs=console=tty0 console=ttyS1,115200 panic=5 rootwait quiet lpj=1015808 root=/dev/mmcblk0p2 ro
bootcmd=env export -t 0x81700000; fatwrite mmc 0:1 0x81700000 uEnv.txt ${filesize}; run distro_bootcmd;
bootcmd_args=setenv bootargs ${bootargs} miyoo_kbd.miyoo_ver=1 miyoo_kbd.miyoo_layout=1 miyoo.miyoo_snd=1 miyoo-video.driver='r61520fb+debug=1'
bootcmd_fel=if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then echo '(FEL boot)'; source ${fel_scriptaddr}; fi
bootcmd_mmc0=devnum=0; run mmc_boot
bootcmd_mmc1=devnum=1; run mmc_boot
bootcmd_mmc_auto=if test ${mmc_bootdev} -eq 1; then run bootcmd_mmc1; run bootcmd_mmc0; elif test ${mmc_bootdev} -eq 0; then run bootcmd_mmc0; run bootcmd_mmc1; fi
bootcmd_usb0=devnum=0; run usb_boot
bootdelay=0
bootm_size=0x1700000
console=ttyS0,115200
cpu=arm926ejs
dfu_alt_info_ram=kernel ram 0x80500000 0x1000000;fdt ram 0x80C00000 0x100000;ramdisk ram 0x80D50000 0x4000000
distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done
fdt_addr_r=0x80C00000
fdtcontroladdr=80e30890
fdtfile=suniv-f1c100s-generic.dtb
fileaddr=81700000
filesize=34
kernel_addr_r=0x80500000
mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi
mmc_bootdev=0
partitions=name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};name=loader2,size=984k,uuid=${uuid_gpt_loader2};name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};name=system,size=-,uuid=${uuid_gpt_system};
preboot=usb start
pxefile_addr_r=0x80D00000
ramdisk_addr_r=0x80D50000
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done; setenv devplist
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scriptaddr=0x80C50000
silent=1
soc=sunxi
splashfile=miyoo-splash.bmp
splashimage=0x80000000
splashsource=mmc_fs
stderr=serial,vga
stdin=serial,usbkbd
stdout=serial,vga
usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi
uuid_gpt_esp=c12a7328-f81f-11d2-ba4b-00a0c93ec93b
uuid_gpt_system=69dad710-2ce4-4e3c-b16c-21a1d49abed3
\00

Issues' terms

• I did not find any existing open/closed issue of same matter