Sunsynk Card for Sigenergy #128
Replies: 4 comments 10 replies
-
|
This is fantastic! |
Beta Was this translation helpful? Give feedback.
-
|
Thanks, Worked well for me out of the box.
Only thing which is missing is my 3rd party solar via Smartport.
|
Beta Was this translation helpful? Give feedback.
-
|
Someone might want to submit an "example" to https://github.com/slipx06/sunsynk-power-flow-card/tree/main/docs/examples :) |
Beta Was this translation helpful? Give feedback.
-
|
I've asked over at slipx06/sunsynk-power-flow-card#737 too... But what is the 0W by the grid?
|
Beta Was this translation helpful? Give feedback.






Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
Thought I'd post this in case anyone else has interest in also using it. Previously I did the Huawei adapation of the Sunsynk Card ( https://github.com/slipx06/sunsynk-power-flow-card ), having now moved to a Sigenstor 30T-48 I thought I might as well see about getting this great integration working with the card also.
At the moment this is only 'draft' stage, as I still needing to rebuild a clean HA instance with all the other Athom / Shelly / IoTaWatt energy and power monitoring devices and get my Shelly 3EM + Addon and Shelly EM-50 with Hager 3ph and 1ph contactors (controlling HVAC and Oven) working, that will then become 'Non Essential' loads (like an EV charger could be deemed) in the card. Alas I don't have a 3ph generator (but I kept the Smart Port in the Gateway free for this in future), that could otherwise be shown on this card as the 'AUX' input, that appears up the very top right of the card.
Current config is:
Note: Any additions / corrections will be added into the above yaml.
Beta Was this translation helpful? Give feedback.
All reactions