Merge pull request #21394 from Ultimaker/CURA-12978

HellAholic · web-flow · commit b9ddb7544e5f · 2026-02-18T09:37:35.000+01:00
Set small_skin_on_surface to False for S8 configs
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.15mm.inst.cfg
@@ -21,7 +21,7 @@ material_initial_print_temperature = =material_print_temperature - 15
 max_skin_angle_for_expansion = 75
 retraction_prime_speed = 30
 skin_preshrink = 0
-small_skin_on_surface = true
+small_skin_on_surface = False
 speed_roofing = =speed_topbottom * 1/3
 speed_wall_x = =speed_wall
 speed_wall_x_roofing = =speed_wall * 0.8
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.1mm.inst.cfg
@@ -21,7 +21,7 @@ material_initial_print_temperature = =material_print_temperature - 15
 max_skin_angle_for_expansion = 75
 retraction_prime_speed = 30
 skin_preshrink = 0
-small_skin_on_surface = true
+small_skin_on_surface = False
 speed_roofing = =speed_topbottom * 1/3
 speed_wall_x = =speed_wall
 speed_wall_x_roofing = =speed_wall * 0.8
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm.inst.cfg
@@ -21,7 +21,7 @@ material_initial_print_temperature = =material_print_temperature - 15
 max_skin_angle_for_expansion = 75
 retraction_prime_speed = 30
 skin_preshrink = 0
-small_skin_on_surface = true
+small_skin_on_surface = False
 speed_roofing = =speed_topbottom * 1/3
 speed_wall_x = =speed_wall
 speed_wall_x_roofing = =speed_wall * 0.8
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.15mm.inst.cfg
@@ -20,7 +20,7 @@ max_skin_angle_for_expansion = 75
 retraction_prime_speed = 30
 retraction_speed = 25
 skin_preshrink = 0
-small_skin_on_surface = true
+small_skin_on_surface = False
 speed_roofing = =speed_topbottom * 1/3
 speed_wall_x = =speed_wall
 speed_wall_x_roofing = =speed_wall * 0.8
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.1mm.inst.cfg
@@ -19,7 +19,7 @@ infill_pattern = zigzag
 max_skin_angle_for_expansion = 75
 retraction_prime_speed = 30
 skin_preshrink = 0
-small_skin_on_surface = true
+small_skin_on_surface = False
 speed_roofing = =speed_topbottom * 1/3
 speed_wall_x = =speed_wall
 speed_wall_x_roofing = =speed_wall * 0.8
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm.inst.cfg
@@ -19,7 +19,7 @@ infill_pattern = zigzag
 max_skin_angle_for_expansion = 75
 retraction_prime_speed = 30
 skin_preshrink = 0
-small_skin_on_surface = true
+small_skin_on_surface = False
 speed_roofing = =speed_topbottom * 1/3
 speed_wall_x = =speed_wall
 speed_wall_x_roofing = =speed_wall * 0.8
