false detection

[akraminoco]

[DETECTED] [BETA] [AIRSTUCK HACK] at (458.80994) : 00h:07m:38s:809ms
i have demo that warned with this detection ?
but no cheats i use , is it problem in this version because in past versions no detection

https://limewire.com/d/MHhcI#7JwsuBkIJ6

"sv has doublejump and i had lag on that second after i checked manually while i jumped so it seems i'm stuck in the air"

[UnrealKaraulov]

Постараюсь посмотреть завтра, не особо понял по описанию. Но airstuck это не лаг, это означает что игрок воспользовался чит-функцией "зависнуть в воздухе", она время кадра делает равным нулю, и игрок за счет этого зависает в воздухе.

[UnrealKaraulov]

[DETECTED] [BETA] [AIRSTUCK HACK] at (458.80994) : 00h:07m:38s:809ms i have demo that warned with this detection ? but no cheats i use , is it problem in this version because in past versions no detection

https://limewire.com/d/MHhcI#7JwsuBkIJ6

"sv has doublejump and i had lag on that second after i checked manually while i jumped so it seems i'm stuck in the air"

Да это срабатывание могло быть ложным потому что игрок делал лаг во время прыжка, посмотрю что с этим можно сделать в следующей версии.

[Musi13]

Hello,
I’m encountering a repeated false-positive detection in Unreal Demo Scanner (v1.75.13 / plugin v1.63) when scanning my demos from Steam CS 1.6.

The scanner always shows:

[ERROR] Disabled detection of [JUMPHACK TYPE 5] and [AIM TYPE 1.6]
[INFO] Small sv_minupdaterate at server. Recommended >= 30
[DETECTED] [IDEALJUMP x6] ...
[DETECTED] [MOUSE JUMP] bind. Detect count: ###
[DETECTED] [MOUSE DUCK] bind. Detect count: ###

However, I have no cheats or macros, the game is cleanly installed from Steam, and I’m using a standard A4Tech Bloody V7 mouse.
Even after a full reinstall of both Half-Life and UDS, the same detections appear in every demo.

I also noticed the message:

[ERROR] Disabled detection of [JUMPHACK TYPE 5] and [AIM TYPE 1.6]

— and I can’t find any way to re-enable these detectors manually.
The plugin initializes correctly, but always outputs that those detections are “Disabled”.

Possible causes I considered:

the mouse polling rate (125–1000 Hz),

servers with sv_minupdaterate < 30,

or maybe false detections caused by the mouse’s fast signal pattern.

System information:

Windows 11 Home

Intel Core i7-10875H, RTX 2070 Super (Max-Q), 16 GB RAM

Mouse: A4Tech Bloody V7 (6000 CPI, 125–1000 Hz report rate)

Game: Counter-Strike 1.6 (Steam AppID 10)

I’d appreciate your advice on:

1. How to re-enable the disabled detectors (JumpHack Type 5 / Aim Type 1.6),

2. Whether the “IDEALJUMP” and “MOUSE JUMP/DUCK” detections are normal for Bloody V7,

3. And if the “Small sv_minupdaterate” warning might cause false positives.

Thank you very much for your time and for maintaining UDS.

Best regards,
Musa @kapanak

@UnrealKaraulov