Pipe Error 32?

[ssokol]

I am getting a pipe error (32) when I execute cp210x-program. According to both the manufacturer and lsusb, the device is a CP2102. cp210x-program works perfectly with other adapters.

ssokol@fbintel:~/cp210x-program$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 8087:0a2a Intel Corp.
Bus 001 Device 005: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP2102/CP2109 UART Bridge Controller [CP210x family]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
ssokol@fbintel:~/cp210x-program$ sudo ./cp210x-program
[Errno 32] Pipe error
ssokol@fbintel:~/cp210x-program$

Any suggestions or thoughts?

[konasimakopoulos]

Just my 2 cents: this seems to happen with a CP2102N but not with the older CP2102.

[Roland-aixACCT-Systems]

Dear all,
we are considering using the "cp210x-program" as a manufacturing tool for the CP2102N. I checked the program with a demo board and I get exactly the same error.
Can you confirm that the code is not compatible with the CP2102N?
Thank you in advance for your answer!
Best regards,
Roland

[sarnold]

We would need some "N" hardware to test, but for now I'd consider this a valid bug (given the information above).

[sarnold]

Same problem with CP2105 (after unloading the kernel module):

Bus 001 Device 068: ID 10c4:ea70 Silicon Labs CP2105 Dual UART Bridge

 $ ./cp210x-program --read-cp210x -m 10c4:ea70
[Errno 32] Pipe error