Supported new SpikeSafe events in spikesafe_lib_docs.SpikeSafeEvents README.md

Author: eljayg

spikesafe_python_lib_docs/SpikeSafeEvents/README.md

@@ -31,6 +31,7 @@ Defines the SpikeSafe events as enumerations.
 | MULTIPLE_PULSE_BURST_MODE_SET_EXTERNAL_SOURCE_TRIGGER_OUT_FORCED_TO_ALWAYS_AND_MULTIPLE_PULSE_TRIGGER_OUT_FORCED_TO_ONE | 122 |
 | MAC_ADDRESS_IS_NOT_CONFIGURED | 123 |
 | NO_EXTERNAL_SOURCE_TRIGGER_OUTPUT_DUE_TO_PULSE_WIDTH_ADJUSTMENT_IS_DISABLED_INTERNALLY | 124 |
+| MAX_COMPLIANCE_VOLTAGE_EXCEEDED_LIMIT | 125 |
 | MAX_COMPLIANCE_VOLTAGE_EXCEEDED | 200 |
 | HIGH_SIDE_OVER_CURRENT | 201 |
 | LOW_SIDE_OVER_CURRENT | 202 |
@@ -123,6 +124,11 @@ Defines the SpikeSafe events as enumerations.
 | INVALID_MULTIPLE_PULSE_RETRIGGER_TIME_OFF | 388 |
 | DIGITIZER_VERSION_NOT_MATCH | 389 |
 | INVALID_SCIENTIFIC_NOTATION | 392 |
+| INVALID_OFF_TIME_CAUSED_BY_INVALID_PULSE_WIDTH_CORRECTION | 395 |
+| INVALID_ON_TIME_CAUSED_BY_INVALID_PULSE_WIDTH_CORRECTION | 396 |
+| CHANNEL_IS_PULSING_CANNOT_CHANGE_SETTING | 397 |
+| COMMUNICATION_ERROR_DURING_IDN_QUERY_I2C_IS_RESET | 398 |
+| CPLD_VERSIONS_DO_NOT_MATCH | 399 |
 | DIGITIZER_INVALID_APERTURE | 401 |
 | DIGITIZER_INVALID_READ_COUNT | 402 |
 | DIGITIZER_INVALID_TRIGGER_COUNT | 403 |
@@ -151,6 +157,19 @@ Defines the SpikeSafe events as enumerations.
 | DIGITIZER_ENABLING_RAW_DATA_REQUIRES_MEASUREMENT_SEQUENCE_TO_BE_IDLE | 428 |
 | DIGITIZER_INVALID_OUTPUT_TRIGGER_DELAY | 429 |
 | DIGITIZER_MISSING_OUTPUT_TRIGGER_DELAY_PARAMETER | 430 |
+| DIGITIZER_THE_INPUT_RELAYS_OF_THE_DEVICE_IS_DISCONNECTED | 431 |
+| DIGITIZER_MISSING_OUTPUT_TRIGGER_EDGE_PARAMETER | 432 |
+| SAMPLING_CUSTOM_SEQUENCE_IS_NOT_SET | 433 |
+| INVALID_VOLTAGE_PROTECTION_MODE | 500 |
+| EXCEED_MAX_TOTAL_NUMBER_OF_STEPS_IN_SAMPLING_CUSTOM_SEQUENCE | 501 |
+| INVALID_SAMPLING_CUSTOM_SEQUENCE | 502 |
+| EXCEED_MAX_TOTAL_READ_COUNT_IN_SAMPLING_CUSTOM_SEQUENCE | 503 |
+| EXCEED_MAX_SAMPLING_CUSTOM_SEQUENCE_STRING_LENGTH | 504 |
+| EXCEED_MAX_TOTAL_SAMPLING_TIME_IN_SAMPLING_CUSTOM_SEQUENCE | 505 |
+| EXCEED_MAX_TOTAL_SAMPLING_CUSTOM_SEQUENCE_STRING_LENGTH | 506 |
+| PREVIOUS_SEQUENCE_HAVE_NOT_BEEN_CLEARED | 507 |
+| NO_SEQUENCE_HAVE_BEEN_SET | 508 |
+| EXCEED_MAX_SAMPLING_CUSTOM_SEQUENCE_APERTURE | 509 |
 
 ### Examples
 [/run_spikesafe_operating_modes/run_dc/RunDcMode.py](/run_spikesafe_operating_modes/run_dc/RunDcMode.py)