Skip to content

Commit 72a2540

Browse files
VikWizVikWiz
committed
2 parents 475ef0e + da59b21 commit 72a2540

22 files changed

+435
-195
lines changed

‎docs/Product/Pre-programmed-MCU/Pre-programmed-MCU.md‎

Lines changed: 21 additions & 20 deletions
Original file line numberDiff line numberDiff line change
@@ -1,20 +1,21 @@
1-
---
2-
id: pre_programmed_mcu
3-
title: Pre-programmed MCU
4-
date: 2020-04-07
5-
---
6-
7-
## Overview
8-
9-
WIZnet MCU products which **S2E firmware is programmed on**
10-
11-
-----
12-
13-
## Product Family
14-
15-
- [W7500(P)-S2E](W7500P-S2E/W7500-P-S2E-EN.md): W7500 / W7500P
16-
pre-programmed MCU products (S2E Firmware)
17-
18-
19-
20-
-----
1+
---
2+
id: pre_programmed_mcu
3+
title: Pre-programmed MCU
4+
date: 2020-04-07
5+
---
6+
7+
## Overview
8+
9+
WIZnet MCU products which **S2E firmware is programmed on**
10+
11+
-----
12+
13+
## Product Family
14+
15+
- [W7500(P)-S2E](W7500P-S2E/W7500-P-S2E-EN.md): W7500 / W7500P
16+
pre-programmed MCU products (S2E Firmware)
17+
- [W55RP20-S2E](../ioNIC/W55RP20/W55RP20-S2E/overview-en.md) W55RP20
18+
pre-programmed MCU products (S2E Firmware)
19+
20+
21+
-----

‎docs/Product/Products.md‎

Lines changed: 3 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -34,6 +34,7 @@ The **IOP4IoT W7500** chip is the one-chip solution which integrates an ARM Cort
3434
- [W5100S](./iEthernet/W5100S/Overview.md)
3535
- [W5500](./iEthernet/W5500/Overview.md)
3636
- [W6100](./iEthernet/W6100/Overview.md)
37+
- [W6300](./iEthernet/W6300/Overview.md)
3738

3839
### Evaluation Board
3940

@@ -49,6 +50,7 @@ The **IOP4IoT W7500** chip is the one-chip solution which integrates an ARM Cort
4950
- [W5100S-EVB-Pico2](./iEthernet/W5100S/w5100s-evb-pico2.md): RP2350-based W5100S chip evaluation board
5051
- [W5500-EVB-Pico2](./iEthernet/W5500/w5500-evb-pico2.md): RP2350-based W5500 chip evaluation board
5152
- [W6100-EVB-Pico2](./iEthernet/W6100/W6100-EVB-Pico2.md): RP2350-based W6100 chip evaluation board
53+
- [W6300-EVB-Pico2](./iEthernet/W6300/W6300-EVB-Pico2.md): RP2350-based W6300 chip evaluation board
5254
-----
5355

5456
## io Module (Internet Offload Module)
@@ -129,6 +131,7 @@ The **IOP4IoT W7500** chip is the one-chip solution which integrates an ARM Cort
129131
### RP2350 (Raspberry Pi Pico2) based
130132

131133
* Board
134+
* [W6300-EVB-Pico2](./iEthernet/W6300/W6300-EVB-Pico2.md)
132135
* [W6100-EVB-Pico2](./iEthernet/W6100/W6100-EVB-Pico2.md)
133136
* [W5500-EVB-Pico2](./iEthernet/W5500/w5500-evb-pico2.md)
134137
* [W5100S-EVB-Pico2](./iEthernet/W5100S/w5100s-evb-pico2.md)

‎docs/Product/iEthernet/W6300/Document.md‎

Lines changed: 4 additions & 5 deletions
Original file line numberDiff line numberDiff line change
@@ -2,14 +2,13 @@
22
id: document
33
title: Document
44
date: 2025-02-27
5-
keywords: [w6100,w6100 datasheet, ethernet chip,wiznet,hardwired tcp/ip,arduino ethernet,pico ethernet]
6-
description: W6100 chip is a Hardwired Internet controller designed as a full hardwired TCP/IP stack with WIZnet technology
5+
keywords: [w6300,w6300 datasheet, ethernet chip,wiznet,hardwired tcp/ip,arduino ethernet,pico ethernet]
6+
description: w6300 chip is a Hardwired Internet controller designed as a full hardwired TCP/IP stack with WIZnet technology
77
---
88

99

10-
## Data Sheet
10+
## Datasheet
1111

12-
<!-- Korean : <a href="/img/products/w6100/w6100_ds_v105k.pdf" target="_blank">W6100 DataSheet v1.0.5</a><br />
13-
English : <a href="/img/products/w6100/w6100_ds_v105e.pdf" target="_blank">W6100 DataSheet v1.0.5</a> -->
12+
English : <a href="/img/products/w6300/W6300 DS_V090E.pdf" target="_blank">W6300 DataSheet v1.0.0</a>
1413

1514
-----

‎docs/Product/iEthernet/W6300/W6300-EVB-Pico2.md‎

Lines changed: 4 additions & 4 deletions
Original file line numberDiff line numberDiff line change
@@ -196,18 +196,18 @@ Please refer to below links to find firmware example.
196196
<!-- - <a href="/img/products/w6100-evb-pico2/Certificate-CE-W6100-EVB-Pico2.pdf" target="_blank">CE Certificate</a>
197197
- <a href="/img/products/w6100-evb-pico2/Test-Report-CE-W6100-EVB-Pico2.pdf" target="_blank">CE Test Report</a> -->
198198

199-
| Date | Decription |
199+
<!-- | Date | Decription |
200200
| ------- | ---------- |
201-
| OCT2023 | \- |
201+
| OCT2023 | \- | -->
202202

203203
#### FCC
204204

205205
<!-- - <a href="/img/products/w6100-evb-pico2/Certificate-FCC-W6100-EVB-Pico2.pdf" target="_blank">FCC Certificate</a>
206206
- <a href="/img/products/w6100-evb-pico2/Test-Report-FCC-W6100-EVB-Pico2.pdf" target="_blank">FCC Test Report</a> -->
207207

208-
| Date | Decription |
208+
<!-- | Date | Decription |
209209
| ------- | ---------- |
210-
| OCT2023 | \- |
210+
| OCT2023 | \- | -->
211211

212212
## How to buy
213213

‎docs/Product/iEthernet/iEthernet.md‎

Lines changed: 12 additions & 12 deletions
Original file line numberDiff line numberDiff line change
@@ -22,18 +22,18 @@ iEthernet is the Ethernet controller chip that includes hardwired TCP/IP Core &
2222
If there are any questions, please use our [`Forum`](https://maker.wiznet.io/forum) or [`contact us`](https://www.wiznet.io/inqueries/).
2323
:::
2424

25-
| | [W6100](W6100/W6100.md) | [W5100S](W5100S/Overview.md) | [W5500](W5500/Overview.md) | [W5300](W5300/W5300.md) | [W5100](W5100/W5100.md) | [W3150A+](W3150/W3150.md)<br />not recommended for new design | [W5200](W5200/w5200.md)<br />not recommended for new design |
26-
| ------------------- | ----------------------- | --- | --- | --- | --- | --- | --- |
27-
| Image | ![W6100](/img/products/w6100/w6100_4.jpg) | ![W5100S](/img/products/w5100s/w5100s_pm.png) | ![W5500](/img/products/w5500/img_w5500h.jpg) | ![W5300](/img/products/w5300/w5300_280.jpg) | ![W5100](/img/products/w5100/W5100-7.jpg) | ![W3150A](/img/products/w3150/photo_w3150A-1.jpg) | |
28-
| Embedded Core | TCP/IPv4/IPv6, MAC & PHY | TCP/IP, MAC & PHY | TCP/IP, MAC & PHY | TCP/IP, MAC & PHY | TCP/IP, MAC & PHY | TCP/IP & MAC | TCP/IP, MAC & PHY |
29-
| Host I/F | 8bit BUS, Fast SPI | 8bit BUS, SPI | Fast SPI | 8/16bit BUS | 8bit BUS, SPI | 8bit BUS, SPI | Fast SPI |
30-
| TX/RX Buffer | 32KB | 16KB | 32KB | 128KB | 16KB | 16KB | 32KB |
31-
| HW Socket # | 8 | 4 | 8 | 8 | 4 | 4 | 8 |
32-
| Network Performance | Max.50Mbps | Max.25Mbps | Max.50Mbps | Max.80Mbps | Max.25Mbps | Max.25Mbps | Max.10Mbps |
33-
| Operation Temp (℃) | -40 .. +85 | -40 .. +85 | -40 .. +85 | -40 .. +85 | -40 .. +85 | -40 .. +85 | -40 .. +85 |
34-
| Package | 48LQFP / QFN | 48LQFP / QFN | 48LQFP | 100LQFP | 80LQFP | 64LQFP | 48QFN |
35-
| Size | 7x7 | 7x7 | 7x7 | 14x14 | 10x10 | 10x10 | 7x7 |
36-
| Evaluation Board | [W6100-EVB](W6100/W6100-EVB.md) | [W5100S-EVB](W5100S/W5100S-EVB.md) <br /><br /> [W5100S-EVB-Pico](W5100S/w5100s-evb-pico.md) | [W5500-EVB](W5500/W5500-EVB/W5500-EVB.md) | [W5300-E01-ARM](W5300/W5300-EVB.md) | [W5100E01-AVR](W5100/W5100-EVB.md) | [EVB-B1+](W3150/W3150-EVB.md) | W5200E01-M3 |
25+
| | [W6300](W6300/W6300.md) | [W6100](W6100/W6100.md) | [W5100S](W5100S/Overview.md) | [W5500](W5500/Overview.md) | [W5300](W5300/W5300.md) | [W5100](W5100/W5100.md) | [W3150A+](W3150/W3150.md)<br />not recommended for new design | [W5200](W5200/w5200.md)<br />not recommended for new design |
26+
| ------------------- | ----------------------- | ----------------------- | --- | --- | --- | --- | --- | --- |
27+
| Image | ![W6300](/img/products/w6300/overview/w6300_chip.png) | ![W6100](/img/products/w6100/w6100_4.jpg) | ![W5100S](/img/products/w5100s/w5100s_pm.png) | ![W5500](/img/products/w5500/img_w5500h.jpg) | ![W5300](/img/products/w5300/w5300_280.jpg) | ![W5100](/img/products/w5100/W5100-7.jpg) | ![W3150A](/img/products/w3150/photo_w3150A-1.jpg) | |
28+
| Embedded Core | TCP/IPv4/IPv6, MAC & PHY | TCP/IPv4/IPv6, MAC & PHY | TCP/IP, MAC & PHY | TCP/IP, MAC & PHY | TCP/IP, MAC & PHY | TCP/IP, MAC & PHY | TCP/IP & MAC | TCP/IP, MAC & PHY |
29+
| Host I/F | 8bit BUS, QSPI | 8bit BUS, Fast SPI | 8bit BUS, SPI | Fast SPI | 8/16bit BUS | 8bit BUS, SPI | 8bit BUS, SPI | Fast SPI |
30+
| TX/RX Buffer | 64KB | 32KB | 16KB | 32KB | 128KB | 16KB | 16KB | 32KB |
31+
| HW Socket # | 8 | 8 | 4 | 8 | 8 | 4 | 4 | 8 |
32+
| Network Performance | Max.91Mbps | Max.50Mbps | Max.25Mbps | Max.50Mbps | Max.80Mbps | Max.25Mbps | Max.25Mbps | Max.10Mbps |
33+
| Operation Temp (℃) | -40 .. +85 | -40 .. +85 | -40 .. +85 | -40 .. +85 | -40 .. +85 | -40 .. +85 | -40 .. +85 | -40 .. +85 |
34+
| Package | 48LQFP | 48LQFP / QFN | 48LQFP / QFN | 48LQFP | 100LQFP | 80LQFP | 64LQFP | 48QFN |
35+
| Size | 7x7 | 7x7 | 7x7 | 7x7 | 14x14 | 10x10 | 10x10 | 7x7 |
36+
| Evaluation Board | [W6300-EVB-Pico2](W6300/W6300-EVB-Pico2.md) | [W6100-EVB](W6100/W6100-EVB.md) <br /><br /> [W6100-EVB-Pico](W6100/W6100-EVB-Pico.md) <br /><br /> [W6100-EVB-Pico2](W6100/W6100-EVB-Pico2.md) | [W5100S-EVB](W5100S/W5100S-EVB.md) <br /><br /> [W5100S-EVB-Pico](W5100S/w5100s-evb-pico.md) <br /><br /> [W5100S-EVB-Pico2](W5100S/w5100s-evb-pico2.md) | [W5500-EVB](W5500/W5500-EVB/W5500-EVB.md) <br /><br /> [W5500-EVB-Pico](W5500/W5500-evb-pico.md) <br /><br /> [W5500-EVB-Pico2](W5500/W5500-evb-pico2.md) | [W5300-E01-ARM](W5300/W5300-EVB.md) | [W5100E01-AVR](W5100/W5100-EVB.md) | [EVB-B1+](W3150/W3150-EVB.md) | W5200E01-M3 |
3737

3838
**We used iPerf tool for measure Network Performance.**
3939

‎docs/Product/ioNIC/W55RP20/W55RP20-S2E/hw-design-guide-en.md‎

Lines changed: 85 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,85 @@
1+
---
2+
id: hw-design-guide-en
3+
title: HW design guide
4+
date: 2024-10-04
5+
keywords: [wiznet, w55rp20,w232n datasheet, hardwired tcp/ip,serial-to-ethernet, w5500, rp2040]
6+
7+
---
8+
9+
# W55RP20 Serial to Ethernet Official Design Guide
10+
11+
## Introduction
12+
The W55RP20 combines WIZnet’s W5500 Ethernet controller and Raspberry Pi’s RP2040 MCU, designed specifically for Serial-to-Ethernet applications supporting UART TTL, RS-232, RS-422, and RS-485 communication.
13+
14+
## Pinout Description
15+
16+
### Setting Pin
17+
18+
| Pin |Pinout|Name| Description |
19+
|--------------|------|-|----------------------------------------------|
20+
| RST |29|RUN| MCU Reset (Active Low) |
21+
| BOOT Mode |21|GP15| Firmware boot mode control |
22+
| AT Mode |20|GP14| Enter AT command mode (Active Low) |
23+
| RP BOOT |63|BOOT| Flash reset & RP2040 boot (Active Low) |
24+
| 232/485 Select|18|GP12| Low: TTL/RS-232, High: RS-422/485 |
25+
| Factory RST | 40|GP18|Reset IP settings (Firmware retained) |
26+
27+
- RST PinThis pin is used for MCU reset and operates in an Active Low state.
28+
29+
- BOOT Mode PinDesigned to control the boot mode of the Serial to Ethernet internal firmware.
30+
31+
- AT Mode PinOperates as Active Low; controlling this pin allows entry into AT command mode via serial for chip control.
32+
33+
- RP BOOT PinThe reset pin for internal flash memory, operating as Active Low, following the RP2040 boot sequence.
34+
35+
- 232/485 Select PinDetermines the communication method based on its state at initial chip operation.
36+
- Low: Sets UART or RS-232 mode
37+
- High: Sets RS-422 or RS-485 mode
38+
39+
- Factory RST PinResets the IP settings to factory defaults while keeping the firmware unchanged.
40+
41+
### Data Pin
42+
43+
| Pin |Pinout|Name| Description |
44+
|--------------|--|-|----------------------------------------------|
45+
| UART_TX |9|GP4| UART data transmission. |
46+
| UART_RX |10|GP5| UART data reception. |
47+
| UART_RTS |12|GP7| UART request to send (flow control) |
48+
| UART_CTS |11|GP6| UART clear to send (flow control) |
49+
| UART_DTR |14|GP8| UART data terminal ready (flow control) |
50+
| UART_DSR |15|GP9| UART data set ready (flow control) |
51+
52+
- **UART_RTS Pin: UART request to send (flow control); determines communication mode (floating for RS-485, Low for RS-422)**
53+
54+
### LED Indicators - Status
55+
56+
| Pin |Pinout|Name| Description |
57+
|--------------|------|-|-------------------------------------------|
58+
| RUN |19|GP19| MCU status LED, blinks when the MCU is operating normally. |
59+
| PHY LINK |16|GP10| Indicates PHY link status |
60+
| TCP Conectoin |17|GP11| Indicates active TCP connection |
61+
62+
63+
64+
## Firmware Upload
65+
Three firmware upload methods:
66+
67+
- **USB (UF2)**
68+
- Set RP-BOOT pin Low and reset; drag `Boot.uf2` and then `app.uf2` into ‘RPI-RP2’ drive.
69+
70+
- **SWD (J-Link)**
71+
- Upload HEX/BIN files using J-Link, same as standard RP2040.
72+
73+
- **Ethernet (BIN)**
74+
- Use WIZnet Configuration Tool for application updates only (not initial upload).
75+
76+
## MAC Address Setup
77+
Initial firmware upload via USB/SWD required. MAC setup essential via WIZnet MAC Tool (115200 baud). MAC address must be purchased separately.
78+
- [download - WIZMacTool](https://docs.wiznet.io/img/products/wiz750sr/developers/restore-mac/wizmactool_v20151127.zip)
79+
- [How to use WIZMacTool](#using-wizmactool)
80+
- [Using Serial Command](#using-serial-command)
81+
82+
## Configuration
83+
Advanced settings and further configurations available using the latest WIZnet Configuration Tool.
84+
85+
- [Configuration Guide](https://docs.wiznet.io/Product/S2E-Module/Industrial/Config-tool-Guide-en1)

0 commit comments

Comments
 (0)