Install finished but not work well on NanoPiR2s version v0.61 with kernel 6.6 or kernel 5.4.

[lusoe302]

installed version is v0.60-6.1 then upgrade install via Flash new firmware image on web page method .
It got installed and rebooted then it booted and just a little second we can call web config , then it got stack , can't call config web anymore .
we can still ping form WAN port IP 192.168.1.113 , can still ping 192.168.100.1 form LAN but It still loading webpage till forever .

Later Flash new firmware image with SD card write method with Balena Etcher , it booted but stack can't ping 192.168.100.1 from LAN , it also can't ping from WAN too(default config is not with DHCP) .

so I go back to v0.60-6.1 r0+24843-acf40c022e by SD card write method .

from v0.61 RC1 - v0.61 RC2 v0.61 - RC3 - OpenMPTCProuter v0.61 release 2024-10-23 06:27
same problem for all 0.61 .
32 GB SD card and Balena Etcher would be fine it work long with from 2023-09-25 to today .
so I go back to v0.60-6.1 it is fine with v0.60 .

[Ysurac]

Can you test latest snapshot ? ( https://snapshots.openmptcprouter.com/ )

[lusoe302]

same problem sir , all same , just a little second can load webpage then all same .

[lusoe302]

same problem sir , all same , just a little second can load webpage then all same .