Is this correct connection?

[Yvette-0508]

Attempting to authorize Google API client...
Using saved credentials.
Google API client authorized successfully.
Starting Ultimate Google Docs MCP server...
MCP Server running using stdio. Awaiting client connection...
Process-level error handling configured to prevent crashes from timeout errors.
[warning] FastMCP could not infer client capabilities
{"method":"ping","jsonrpc":"2.0","id":0}
{"method":"ping","jsonrpc":"2.0","id":1}
{"method":"ping","jsonrpc":"2.0","id":2}
{"method":"ping","jsonrpc":"2.0","id":3}
{"method":"ping","jsonrpc":"2.0","id":4}
{"method":"ping","jsonrpc":"2.0","id":5}
{"method":"ping","jsonrpc":"2.0","id":6}
{"method":"ping","jsonrpc":"2.0","id":7}
{"method":"ping","jsonrpc":"2.0","id":8}
{"method":"ping","jsonrpc":"2.0","id":9}
{"method":"ping","jsonrpc":"2.0","id":10}
{"method":"ping","jsonrpc":"2.0","id":11}
{"method":"ping","jsonrpc":"2.0","id":12}
{"method":"ping","jsonrpc":"2.0","id":13}
{"method":"ping","jsonrpc":"2.0","id":14}
{"method":"ping","jsonrpc":"2.0","id":15}
{"method":"ping","jsonrpc":"2.0","id":16}
{"method":"ping","jsonrpc":"2.0","id":17}
{"method":"ping","jsonrpc":"2.0","id":18}
{"method":"ping","jsonrpc":"2.0","id":19}
{"method":"ping","jsonrpc":"2.0","id":20}
{"method":"ping","jsonrpc":"2.0","id":21}
{"method":"ping","jsonrpc":"2.0","id":22}
{"method":"ping","jsonrpc":"2.0","id":23}
{"method":"ping","jsonrpc":"2.0","id":24}
{"method":"ping","jsonrpc":"2.0","id":25}
{"method":"ping","jsonrpc":"2.0","id":26}
{"me

[kleego]

@Yvette-0508 I also encountered these messages, and I just ignored them and kept going and was able to set it up to run correctly at the end. I wrote a step-by-step guide showing how I set up this particular MCP server from scratch and the "Step 3: First run and Google authorization" section is where you will run into the message you showed and I just kept going to reach "Step 4" and was able to set it up at the end!

[Yvette-0508]

@kleego Thank you! My google doc works normally now!

[kleego]

@Yvette-0508 Great to hear! Did the guide help at all or you already figured it out before my previous reply? 😅

Also curious, were you able to resolve the error messages ({"method":"ping","jsonrpc":"2.0","id":0}), or you just ignored them and skip to next step like I did too?

[Yvette-0508]

It worked normally before the guide, i just ignore that