diff --git a/.github/workflows/codacy.yml b/.github/workflows/codacy.yml
new file mode 100644
index 000000000..70967b818
--- /dev/null
+++ b/.github/workflows/codacy.yml
@@ -0,0 +1,61 @@
+# This workflow uses actions that are not certified by GitHub.
+# They are provided by a third-party and are governed by
+# separate terms of service, privacy policy, and support
+# documentation.
+
+# This workflow checks out code, performs a Codacy security scan
+# and integrates the results with the
+# GitHub Advanced Security code scanning feature.  For more information on
+# the Codacy security scan action usage and parameters, see
+# https://github.com/codacy/codacy-analysis-cli-action.
+# For more information on Codacy Analysis CLI in general, see
+# https://github.com/codacy/codacy-analysis-cli.
+
+name: Codacy Security Scan
+
+on:
+  push:
+    branches: [ "main" ]
+  pull_request:
+    # The branches below must be a subset of the branches above
+    branches: [ "main" ]
+  schedule:
+    - cron: '29 5 * * 3'
+
+permissions:
+  contents: read
+
+jobs:
+  codacy-security-scan:
+    permissions:
+      contents: read # for actions/checkout to fetch code
+      security-events: write # for github/codeql-action/upload-sarif to upload SARIF results
+      actions: read # only required for a private repository by github/codeql-action/upload-sarif to get the Action run status
+    name: Codacy Security Scan
+    runs-on: ubuntu-latest
+    steps:
+      # Checkout the repository to the GitHub Actions runner
+      - name: Checkout code
+        uses: actions/checkout@v4
+
+      # Execute Codacy Analysis CLI and generate a SARIF output with the security issues identified during the analysis
+      - name: Run Codacy Analysis CLI
+        uses: codacy/codacy-analysis-cli-action@d840f886c4bd4edc059706d09c6a1586111c540b
+        with:
+          # Check https://github.com/codacy/codacy-analysis-cli#project-token to get your project token from your Codacy repository
+          # You can also omit the token and run the tools that support default configurations
+          project-token: ${{ secrets.CODACY_PROJECT_TOKEN }}
+          verbose: true
+          output: results.sarif
+          format: sarif
+          # Adjust severity of non-security issues
+          gh-code-scanning-compat: true
+          # Force 0 exit code to allow SARIF file generation
+          # This will handover control about PR rejection to the GitHub side
+          max-allowed-issues: 2147483647
+
+      # Upload the SARIF file generated in the previous step
+      - name: Upload SARIF results file
+        uses: github/codeql-action/upload-sarif@v3
+        with:
+          sarif_file: results.sarif
diff --git a/.github/workflows/defender-for-devops.yml b/.github/workflows/defender-for-devops.yml
new file mode 100644
index 000000000..28cf05674
--- /dev/null
+++ b/.github/workflows/defender-for-devops.yml
@@ -0,0 +1,47 @@
+# This workflow uses actions that are not certified by GitHub.
+# They are provided by a third-party and are governed by
+# separate terms of service, privacy policy, and support
+# documentation.
+#
+# Microsoft Security DevOps (MSDO) is a command line application which integrates static analysis tools into the development cycle.
+# MSDO installs, configures and runs the latest versions of static analysis tools
+# (including, but not limited to, SDL/security and compliance tools).
+#
+# The Microsoft Security DevOps action is currently in beta and runs on the windows-latest queue,
+# as well as Windows self hosted agents. ubuntu-latest support coming soon.
+#
+# For more information about the action , check out https://github.com/microsoft/security-devops-action
+#
+# Please note this workflow do not integrate your GitHub Org with Microsoft Defender For DevOps. You have to create an integration
+# and provide permission before this can report data back to azure.
+# Read the official documentation here : https://learn.microsoft.com/en-us/azure/defender-for-cloud/quickstart-onboard-github
+
+name: "Microsoft Defender For Devops"
+
+on:
+  push:
+    branches: [ "main" ]
+  pull_request:
+    branches: [ "main" ]
+  schedule:
+    - cron: '28 13 * * 5'
+
+jobs:
+  MSDO:
+    # currently only windows latest is supported
+    runs-on: windows-latest
+
+    steps:
+    - uses: actions/checkout@v4
+    - uses: actions/setup-dotnet@v4
+      with:
+        dotnet-version: |
+          5.0.x
+          6.0.x
+    - name: Run Microsoft Security DevOps
+      uses: microsoft/security-devops-action@v1.6.0
+      id: msdo
+    - name: Upload results to Security tab
+      uses: github/codeql-action/upload-sarif@v3
+      with:
+        sarif_file: ${{ steps.msdo.outputs.sarifFile }}
diff --git a/.github/workflows/eslint.yml b/.github/workflows/eslint.yml
new file mode 100644
index 000000000..5a7167b4b
--- /dev/null
+++ b/.github/workflows/eslint.yml
@@ -0,0 +1,52 @@
+# This workflow uses actions that are not certified by GitHub.
+# They are provided by a third-party and are governed by
+# separate terms of service, privacy policy, and support
+# documentation.
+# ESLint is a tool for identifying and reporting on patterns
+# found in ECMAScript/JavaScript code.
+# More details at https://github.com/eslint/eslint
+# and https://eslint.org
+
+name: ESLint
+
+on:
+  push:
+    branches: [ "main" ]
+  pull_request:
+    # The branches below must be a subset of the branches above
+    branches: [ "main" ]
+  schedule:
+    - cron: '28 20 * * 2'
+
+jobs:
+  eslint:
+    name: Run eslint scanning
+    runs-on: ubuntu-latest
+    permissions:
+      contents: read
+      security-events: write
+      actions: read # only required for a private repository by github/codeql-action/upload-sarif to get the Action run status
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+
+      - name: Install ESLint
+        run: |
+          npm install eslint@8.10.0
+          npm install @microsoft/eslint-formatter-sarif@3.1.0
+
+      - name: Run ESLint
+        env:
+          SARIF_ESLINT_IGNORE_SUPPRESSED: "true"
+        run: npx eslint .
+          --config .eslintrc.js
+          --ext .js,.jsx,.ts,.tsx
+          --format @microsoft/eslint-formatter-sarif
+          --output-file eslint-results.sarif
+        continue-on-error: true
+
+      - name: Upload analysis results to GitHub
+        uses: github/codeql-action/upload-sarif@v3
+        with:
+          sarif_file: eslint-results.sarif
+          wait-for-processing: true
diff --git a/.github/workflows/semgrep.yml b/.github/workflows/semgrep.yml
new file mode 100644
index 000000000..3d3f1e19e
--- /dev/null
+++ b/.github/workflows/semgrep.yml
@@ -0,0 +1,49 @@
+# This workflow uses actions that are not certified by GitHub.
+# They are provided by a third-party and are governed by
+# separate terms of service, privacy policy, and support
+# documentation.
+
+# This workflow file requires a free account on Semgrep.dev to
+# manage rules, file ignores, notifications, and more.
+#
+# See https://semgrep.dev/docs
+
+name: Semgrep
+
+on:
+  push:
+    branches: [ "main" ]
+  pull_request:
+    # The branches below must be a subset of the branches above
+    branches: [ "main" ]
+  schedule:
+    - cron: '15 7 * * 5'
+
+permissions:
+  contents: read
+
+jobs:
+  semgrep:
+    permissions:
+      contents: read # for actions/checkout to fetch code
+      security-events: write # for github/codeql-action/upload-sarif to upload SARIF results
+      actions: read # only required for a private repository by github/codeql-action/upload-sarif to get the Action run status
+    name: Scan
+    runs-on: ubuntu-latest
+    steps:
+      # Checkout project source
+      - uses: actions/checkout@v4
+
+      # Scan code using project's configuration on https://semgrep.dev/manage
+      - uses: returntocorp/semgrep-action@fcd5ab7459e8d91cb1777481980d1b18b4fc6735
+        with:
+          publishToken: ${{ secrets.SEMGREP_APP_TOKEN }}
+          publishDeployment: ${{ secrets.SEMGREP_DEPLOYMENT_ID }}
+          generateSarif: "1"
+
+      # Upload SARIF file generated in previous step
+      - name: Upload SARIF file
+        uses: github/codeql-action/upload-sarif@v3
+        with:
+          sarif_file: semgrep.sarif
+        if: always()
diff --git a/.github/workflows/xanitizer.yml b/.github/workflows/xanitizer.yml
new file mode 100644
index 000000000..4fe19a223
--- /dev/null
+++ b/.github/workflows/xanitizer.yml
@@ -0,0 +1,100 @@
+# This workflow uses actions that are not certified by GitHub.
+# They are provided by a third-party and are governed by
+# separate terms of service, privacy policy, and support
+# documentation.
+
+# This workflow downloads and installs the latest version of Xanitizer, builds your project, runs a Xanitizer security analysis on it,
+# and then archives the findings list reports and uploads the findings into the GitHub code scanning alert section of your repository.
+#
+# Documentation for the `RIGS-IT/xanitizer-action` is located here: https://github.com/RIGS-IT/xanitizer-action
+#
+# To use this basic workflow, you will need to complete the following setup steps:
+#
+# 1. The underlying Xanitizer, used in this workflow, needs a separate license file.
+#    Licenses are free of charge for open source projects and for educational usage.
+#    To get more information about the Xanitizer licenses and how to obtain a license file,
+#    please consult https://www.xanitizer.com/xanitizer-pricing/.
+#
+# 2. The content of the license file has to be stored as a GitHub secret (e.g. XANITIZER_LICENSE) on this repository.
+#    Please consult https://docs.github.com/en/actions/configuring-and-managing-workflows/creating-and-storing-encrypted-secrets for details.
+#
+# 3. Reference the GitHub secret in the step using the `RIGS-IT/xanitizer-action` GitHub action.
+#    Example:
+#    - name: Xanitizer Security Analysis
+#      uses: RIGS-IT/xanitizer-action@v1
+#      with:
+#        license: ${{ secrets.XANITIZER_LICENSE }}
+#
+# 4. As a static application security testing (SAST) tool,
+#    Xanitizer requires that all dependencies of the artifacts being analyzed can be resolved successfully.
+#    So you have to install all used libraries and build your project before running the security analysis,
+#    e.g. via `mvn compile` for Java or `npm install` for JavaScript
+
+name: "Xanitizer Security Analysis"
+
+on:
+  push:
+    branches: [ "main" ]
+  pull_request:
+    # The branches below must be a subset of the branches above
+    branches: [ "main" ]
+  schedule:
+    - cron: '28 14 * * 6'
+  workflow_dispatch:
+
+permissions:
+  contents: read
+
+jobs:
+  xanitizer-security-analysis:
+    # Xanitizer runs on ubuntu-latest and windows-latest.
+    permissions:
+      contents: read # for actions/checkout to fetch code
+      security-events: write # for github/codeql-action/upload-sarif to upload SARIF results
+      actions: read # only required for a private repository by github/codeql-action/upload-sarif to get the Action run status
+    runs-on: ubuntu-latest
+
+    steps:
+      # Check out the repository
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      # Set up the correct Java version for your project
+      # Please comment out, if your project does not contain Java source code.
+      - name: Set up JDK 11
+        uses: actions/setup-java@v4
+        with:
+          java-version: 11
+          distribution: 'temurin'
+
+      # Compile the code for Java projects and get all libraries, e.g. via Maven
+      # Please adapt, if your project uses another build system to compile Java source code.
+      # Please comment out, if your project does not contain Java source code.
+      - name: Compile Java code
+        run: mvn -B compile
+
+      # Install all dependent libraries for JavaScript/TypeScript projects, e.g. via npm
+      # Please adapt to run `npm install` in the correct directories.
+      # Please adapt, if your project uses another package manager for getting JavaScript libraries.
+      # Please comment out, if your project does not use a package manager for getting JavaScript libraries.
+      - name: Install JavaScript libraries
+        run: npm install
+
+      # Run the security analysis with default settings
+      - name: Xanitizer Security Analysis
+        uses: RIGS-IT/xanitizer-action@87d13138fb113b727cbe040c744a15a2b4fe5316
+        with:
+          license: ${{ secrets.XANITIZER_LICENSE }}
+
+      # Archiving the findings list reports
+      - uses: actions/upload-artifact@v4
+        with:
+          name: Xanitizer-Reports
+          path: |
+            *-Findings-List.pdf
+            *-Findings-List.sarif
+
+      # Uploads the findings into the GitHub code scanning alert section using the upload-sarif action
+      - uses: github/codeql-action/upload-sarif@v3
+        with:
+          sarif_file: Xanitizer-Findings-List.sarif
diff --git a/.github/workflows/zscan.yml b/.github/workflows/zscan.yml
new file mode 100644
index 000000000..0c35e1714
--- /dev/null
+++ b/.github/workflows/zscan.yml
@@ -0,0 +1,60 @@
+# This workflow uses actions that are not certified by GitHub.
+# They are provided by a third-party and are governed by
+# separate terms of service, privacy policy, and support
+# documentation.
+#
+# The zimperium-zscan GitHub action scans your mobile app binary (iOS or Android)
+# and identifies security, privacy, and compliance-related vulnerabilities. ​
+#
+# Prerequisites:
+#  * An active Zimperium zScan account is required. If you are not an existing Zimperium
+#    zScan customer, please request a zSCAN demo by visiting https://www.zimperium.com/contact-us.
+#  * Either GitHub Advanced Security (GHAS) or a public repository is required to display
+#    issues and view the remediation information inside of GitHub code scanning alerts.​
+#
+# For additional information and setup instructions
+# please visit:  https://github.com/Zimperium/zScanMarketplace#readme
+
+name: "Zimperium zScan"
+
+on:
+  push:
+    branches: [ "main" ]
+  pull_request:
+    branches: [ "main" ]
+
+permissions:
+  contents: read
+
+jobs:
+  zscan:
+    name: zScan
+    runs-on: ubuntu-latest
+    permissions:
+      contents: read          # for actions/checkout to fetch code
+      security-events: write  # for github/codeql-action/upload-sarif to upload SARIF results
+      actions: read           # only required for a private repository by github/codeql-action/upload-sarif to get the Action run status
+    steps:
+    - name: Checkout repository
+      uses: actions/checkout@v4
+
+    - name: Execute gradle build
+      run: ./gradlew build    # Change this to build your mobile application
+
+    - name: Run Zimperium zScan
+      uses: zimperium/zscanmarketplace@bfc6670f6648d796098c251ccefcfdb98983174d
+      timeout-minutes: 60
+      with:
+        # REPLACE: Zimperium Client Environment Name
+        client_env: env_string
+        # REPLACE: Zimperium Client ID
+        client_id: id_string
+        # REPLACE: Zimperium Client Secret
+        client_secret: ${{ secrets.ZSCAN_CLIENT_SECRET }}
+        # REPLACE: The path to an .ipa or .apk
+        app_file: app-release-unsigned.apk
+
+    - name: Upload SARIF file
+      uses: github/codeql-action/upload-sarif@v3
+      with:
+        sarif_file: Zimperium.sarif
diff --git a/SECURITY.md b/SECURITY.md
new file mode 100644
index 000000000..034e84803
--- /dev/null
+++ b/SECURITY.md
@@ -0,0 +1,21 @@
+# Security Policy
+
+## Supported Versions
+
+Use this section to tell people about which versions of your project are
+currently being supported with security updates.
+
+| Version | Supported          |
+| ------- | ------------------ |
+| 5.1.x   | :white_check_mark: |
+| 5.0.x   | :x:                |
+| 4.0.x   | :white_check_mark: |
+| < 4.0   | :x:                |
+
+## Reporting a Vulnerability
+
+Use this section to tell people how to report a vulnerability.
+
+Tell them where to go, how often they can expect to get an update on a
+reported vulnerability, what to expect if the vulnerability is accepted or
+declined, etc.