Update README.md

Author: ladyada

README.md

@@ -1,4 +1,4 @@
-# Adafruit BME280 Library [![Build Status](https://travis-ci.org/adafruit/Adafruit_BME280_Library.svg?branch=master)](https://travis-ci.org/adafruit/Adafruit_BME280_Library)
+# Adafruit BME280 Library [![Build Status](https://travis-ci.com/adafruit/Adafruit_BME280_Library.svg?branch=master)](https://travis-ci.com/adafruit/Adafruit_BME280_Library)
 
 <a href="http://www.adafruit.com/products/2652"><img src="./assets/board.jpg" width="500"/></a>
 
@@ -29,35 +29,3 @@ You may need to create the libraries subfolder if its your first library. Restar
 
 We also have a great tutorial on Arduino library installation at:
 http://learn.adafruit.com/adafruit-all-about-arduino-libraries-install-use
-<!-- START COMPATIBILITY TABLE -->
-
-## Compatibility
-
-MCU                | Tested Works | Doesn't Work | Not Tested  | Notes
------------------- | :----------: | :----------: | :---------: | -----
-Atmega328 @ 16MHz  |      X       |             |            | 
-Atmega328 @ 12MHz  |      X       |             |            | 
-Atmega32u4 @ 16MHz |      X       |             |            | Use SDA/SCL on pins D2 &amp; D3
-Atmega32u4 @ 8MHz  |      X       |             |            | Use SDA/SCL on pins D2 &amp; D3
-ESP8266            |      X       |             |            | I2C: just works, SPI: SDA/SCL default to pins 4 &amp; 5 but any two pins can be assigned as SDA/SCL using Wire.begin(SDA,SCL)
-ESP32              |      X       |             |            | I2C: just works, SPI: SDA/SCL default to pins 4 &amp; 5 but any two pins can be assigned as SDA/SCL using Wire.begin(SDA,SCL) 
-Atmega2560 @ 16MHz |      X       |             |            | Use SDA/SCL on pins 20 &amp; 21
-ATSAM3X8E          |      X       |             |            | Use SDA/SCL on pins 20 &amp; 21
-ATSAM21D           |      X       |             |            | 
-ATtiny85 @ 16MHz   |              |     X       |            | 
-ATtiny85 @ 8MHz    |              |     X       |            | 
-Intel Curie @ 32MHz |             |             |     X      | 
-STM32F2            |              |             |     X      | 
-
-  * ATmega328 @ 16MHz : Arduino UNO, Adafruit Pro Trinket 5V, Adafruit Metro 328, Adafruit Metro Mini
-  * ATmega328 @ 12MHz : Adafruit Pro Trinket 3V
-  * ATmega32u4 @ 16MHz : Arduino Leonardo, Arduino Micro, Arduino Yun, Teensy 2.0
-  * ATmega32u4 @ 8MHz : Adafruit Flora, Bluefruit Micro
-  * ESP8266 : Adafruit Huzzah
-  * ATmega2560 @ 16MHz : Arduino Mega
-  * ATSAM3X8E : Arduino Due
-  * ATSAM21D : Arduino Zero, M0 Pro
-  * ATtiny85 @ 16MHz : Adafruit Trinket 5V
-  * ATtiny85 @ 8MHz : Adafruit Gemma, Arduino Gemma, Adafruit Trinket 3V
-
-<!-- END COMPATIBILITY TABLE -->