Fourwire change

Author: FoamyGuy

CircuitPython_ESP32_Camera/esp32-kaluga-onionskin-gif/code.py

@@ -52,6 +52,7 @@
 import board
 import busio
 import bitmaptools
+import fourwire
 import displayio
 import sdcardio
 import storage
@@ -68,7 +69,7 @@ def record_pressed():
 
 displayio.release_displays()
 spi = busio.SPI(MOSI=board.LCD_MOSI, clock=board.LCD_CLK)
-display_bus = displayio.FourWire(
+display_bus = fourwire.FourWire(
     spi,
     command=board.LCD_D_C,
     chip_select=board.LCD_CS,

CircuitPython_Flying_Toasters/code.py

@@ -21,6 +21,7 @@
 from random import seed, randint
 import board
 import displayio
+import fourwire
 from adafruit_st7789 import ST7789
 import adafruit_imageload
 
@@ -63,7 +64,7 @@ def make_display():
     spi.configure(baudrate=24000000)  # Configure SPI for 24MHz
     spi.unlock()
     displayio.release_displays()
-    display_bus = displayio.FourWire(spi, command=board.D7, chip_select=board.D10, reset=board.D9)
+    display_bus = fourwire.FourWire(spi, command=board.D7, chip_select=board.D10, reset=board.D9)
 
     return ST7789(display_bus, width=240, height=240, rowstart=80, auto_refresh=True)
 

CircuitPython_Knob_Sketcher/feather_sketcher/code.py

@@ -9,6 +9,7 @@
 import time
 import board
 import displayio
+import fourwire
 import digitalio
 import analogio
 import adafruit_ili9341
@@ -55,7 +56,7 @@
 tft_cs = board.D9
 tft_dc = board.D10
 tft_rst = board.D6
-display_bus = displayio.FourWire(
+display_bus = fourwire.FourWire(
     spi, command=tft_dc, chip_select=tft_cs, reset=tft_rst
 )
 display = adafruit_ili9341.ILI9341(display_bus, width=DISPLAY_WIDTH, height=DISPLAY_HEIGHT)

CircuitPython_Scrolling_Clouds/code.py

@@ -21,6 +21,7 @@
 from random import seed, randint
 import board
 import displayio
+import fourwire
 from adafruit_st7789 import ST7789
 import adafruit_imageload
 
@@ -54,7 +55,7 @@ def make_display():
     spi.unlock()
 
     displayio.release_displays()
-    display_bus = displayio.FourWire(spi, command=board.D7, chip_select=board.D10, reset=board.D9)
+    display_bus = fourwire.FourWire(spi, command=board.D7, chip_select=board.D10, reset=board.D9)
 
     return ST7789(display_bus, width=240, height=240, rowstart=80, auto_refresh=True)
 

CircuitPython_displayio/displayio_display_driver/code.py

@@ -4,6 +4,7 @@
 
 import board
 import displayio
+import fourwire
 import adafruit_ili9341
 
 # Release any previously configured displays
@@ -17,7 +18,7 @@
 tft_dc = board.D9
 
 # Setup the display bus
-display_bus = displayio.FourWire(spi_bus, command=tft_dc, chip_select=tft_cs)
+display_bus = fourwire.FourWire(spi_bus, command=tft_dc, chip_select=tft_cs)
 
 # Setup the Display
 display = adafruit_ili9341.ILI9341(display_bus, width=320, height=240)

CircuitPython_displayio/displayio_display_manual/code.py

@@ -4,6 +4,7 @@
 
 import board
 import displayio
+import fourwire
 
 # Release any previously configured displays
 displayio.release_displays()
@@ -16,7 +17,7 @@
 tft_dc = board.D9
 
 # Setup the display bus
-display_bus = displayio.FourWire(spi_bus, command=tft_dc, chip_select=tft_cs)
+display_bus = fourwire.FourWire(spi_bus, command=tft_dc, chip_select=tft_cs)
 
 # Setup the initialization sequence
 # stolen from adafruit_ili9341.py

CircuitPython_qrio/adafruit_io/code.py

@@ -15,6 +15,7 @@
 import board
 import busio
 import displayio
+import fourwire
 import qrio
 import socketpool
 import wifi
@@ -30,7 +31,7 @@
 print("Initializing display")
 displayio.release_displays()
 spi = busio.SPI(MOSI=board.LCD_MOSI, clock=board.LCD_CLK)
-display_bus = displayio.FourWire(
+display_bus = fourwire.FourWire(
     spi, command=board.LCD_D_C, chip_select=board.LCD_CS, reset=board.LCD_RST
 )
 display = ILI9341(display_bus, width=320, height=240, rotation=90)

CircuitPython_qrio/repl/code.py

@@ -12,6 +12,7 @@
 import board
 import busio
 import displayio
+import fourwire
 import qrio
 import adafruit_ov2640
 from adafruit_display_text.bitmap_label import Label
@@ -20,7 +21,7 @@
 print("Initializing display")
 displayio.release_displays()
 spi = busio.SPI(MOSI=board.LCD_MOSI, clock=board.LCD_CLK)
-display_bus = displayio.FourWire(
+display_bus = fourwire.FourWire(
     spi, command=board.LCD_D_C, chip_select=board.LCD_CS, reset=board.LCD_RST
 )
 display = ILI9341(display_bus, width=320, height=240, rotation=90)

CircuitPython_qrio/usb_hid/code.py

@@ -13,6 +13,7 @@
 import board
 import busio
 import displayio
+import fourwire
 import qrio
 import adafruit_ov2640
 from adafruit_display_text.bitmap_label import Label
@@ -24,7 +25,7 @@
 print("Initializing display")
 displayio.release_displays()
 spi = busio.SPI(MOSI=board.LCD_MOSI, clock=board.LCD_CLK)
-display_bus = displayio.FourWire(
+display_bus = fourwire.FourWire(
     spi, command=board.LCD_D_C, chip_select=board.LCD_CS, reset=board.LCD_RST
 )
 display = ILI9341(display_bus, width=320, height=240, rotation=90)

Circuit_Playground_O_Phonor/notes_tft/code.py

@@ -8,6 +8,7 @@
 import busio
 import audiobusio
 import displayio
+import fourwire
 from adafruit_st7789 import ST7789
 from adafruit_bitmap_font import bitmap_font
 from adafruit_display_text import label
@@ -46,7 +47,7 @@
 tft_dc = board.TX
 tft_backlight = board.A3
 
-display_bus = displayio.FourWire(spi, command=tft_dc, chip_select=tft_cs)
+display_bus = fourwire.FourWire(spi, command=tft_dc, chip_select=tft_cs)
 
 display = ST7789(display_bus, width=240, height=240, rowstart=80,
                  backlight_pin=tft_backlight, rotation=180)