i2cdisplaybus change

Author: FoamyGuy

4x4_MIDI_Messenger/code.py

@@ -8,6 +8,7 @@
 from rainbowio import colorwheel
 import keypad
 import displayio
+import i2cdisplaybus
 import busio
 import adafruit_seesaw.seesaw
 import adafruit_seesaw.neopixel
@@ -50,7 +51,7 @@
 
 i2c = board.STEMMA_I2C()
 # STEMMA OLED setup
-display_bus = displayio.I2CDisplay(i2c, device_address=0x3D, reset=oled_reset)
+display_bus = i2cdisplaybus.I2CDisplayBus(i2c, device_address=0x3D, reset=oled_reset)
 display = adafruit_displayio_ssd1306.SSD1306(display_bus, width=128, height=64)
 
 splash = displayio.Group()

AHT20_OLED/code.py

@@ -11,6 +11,7 @@
 
 # OLED
 import displayio
+import i2cdisplaybus
 import terminalio
 from adafruit_display_text import label
 import adafruit_displayio_ssd1306
@@ -25,7 +26,7 @@
 
 
 #OLED
-display_bus = displayio.I2CDisplay(i2c, device_address=0x3C)
+display_bus = i2cdisplaybus.I2CDisplayBus(i2c, device_address=0x3C)
 display = adafruit_displayio_ssd1306.SSD1306(display_bus, width=128, height=32)
 
 # Make the display context

CAN_Bus_BFF/CircuitPython/can_bus_bff_receiver.py

@@ -5,6 +5,7 @@
 import board
 import terminalio
 import displayio
+import i2cdisplaybus
 from digitalio import DigitalInOut
 from adafruit_mcp2515.canio import Message, RemoteTransmissionRequest
 from adafruit_mcp2515 import MCP2515 as CAN
@@ -15,7 +16,7 @@
 
 i2c = board.STEMMA_I2C()
 # STEMMA OLED setup
-display_bus = displayio.I2CDisplay(i2c, device_address=0x3D, reset=None)
+display_bus = i2cdisplaybus.I2CDisplayBus(i2c, device_address=0x3D, reset=None)
 display = adafruit_displayio_ssd1306.SSD1306(display_bus, width=128, height=64)
 
 cs = DigitalInOut(board.A3)

CircuitPython_GetSuperpower_PicoW_OpenAI/code.py

@@ -7,6 +7,7 @@
 
 import board
 import displayio
+import i2cdisplaybus
 import digitalio
 import keypad
 import socketpool
@@ -75,7 +76,7 @@
 
 # STEMMA I2C on picowbell
 i2c = board.STEMMA_I2C()
-display_bus = displayio.I2CDisplay(i2c, device_address=0x3D, reset=oled_reset)
+display_bus = i2cdisplaybus.I2CDisplayBus(i2c, device_address=0x3D, reset=oled_reset)
 
 WIDTH = 128
 HEIGHT = 64

CircuitPython_KeyPad_Calculator/code/code.py

@@ -4,6 +4,7 @@
 
 import board
 import displayio
+import i2cdisplaybus
 import keypad
 import adafruit_displayio_sh1107
 from adafruit_hid.keyboard import Keyboard
@@ -57,7 +58,7 @@ def lookup(layer, key_number):
 # Use for I2C
 i2c = board.I2C()  # uses board.SCL and board.SDA
 # i2c = board.STEMMA_I2C()  # For using the built-in STEMMA QT connector on a microcontroller
-display_bus = displayio.I2CDisplay(i2c, device_address=0x3C)
+display_bus = i2cdisplaybus.I2CDisplayBus(i2c, device_address=0x3C)
 
 # SH1107 is vertically oriented 64x128
 WIDTH = 128

CircuitPython_OLED_Watch/code.py

@@ -4,6 +4,7 @@
 
 import board
 import displayio
+import i2cdisplaybus
 import adafruit_displayio_ssd1306
 import terminalio
 import adafruit_ds3231
@@ -17,7 +18,7 @@
 
 i2c = board.I2C()  # uses board.SCL and board.SDA
 # i2c = board.STEMMA_I2C()  # For using the built-in STEMMA QT connector on a microcontroller
-display_bus = displayio.I2CDisplay(i2c, device_address=0x3c)
+display_bus = i2cdisplaybus.I2CDisplayBus(i2c, device_address=0x3c)
 oled = adafruit_displayio_ssd1306.SSD1306(display_bus, width=128, height=32)
 
 rtc = adafruit_ds3231.DS3231(i2c)

CircuitPython_Sip_and_Puff/puff_detector.py

@@ -10,6 +10,7 @@
 from adafruit_display_text import label
 from displayio import Group
 import displayio
+import i2cdisplaybus
 import adafruit_displayio_ssd1306
 import adafruit_lps35hw
 
@@ -94,7 +95,7 @@ def _init_stuff(self):
         displayio.release_displays()
         i2c = board.I2C()
 
-        display_bus = displayio.I2CDisplay(i2c, device_address=0x3D)
+        display_bus = i2cdisplaybus.I2CDisplayBus(i2c, device_address=0x3D)
         self.display = adafruit_displayio_ssd1306.SSD1306(
             display_bus, width=DISPLAY_WIDTH, height=DISPLAY_HEIGHT
         )

FunHouse_IOT_Hub/battery_peripheral/code.py

@@ -25,6 +25,7 @@
 from adafruit_io.adafruit_io import IO_MQTT
 
 import displayio
+import i2cdisplaybus
 import terminalio
 from adafruit_display_text import label
 import adafruit_displayio_ssd1306
@@ -101,7 +102,7 @@ def message(client, feed_id, payload):
 
 i2c = board.I2C()  # uses board.SCL and board.SDA
 # i2c = board.STEMMA_I2C()  # For using the built-in STEMMA QT connector on a microcontroller
-display_bus = displayio.I2CDisplay(i2c, device_address=0x3C)
+display_bus = i2cdisplaybus.I2CDisplayBus(i2c, device_address=0x3C)
 
 WIDTH = 128
 HEIGHT = 32

I_Voted_Pin/code.py

@@ -6,6 +6,7 @@
 from adafruit_debouncer import Debouncer
 import digitalio
 import displayio
+import i2cdisplaybus
 from adafruit_display_text import label
 import adafruit_displayio_ssd1306
 from adafruit_bitmap_font import bitmap_font
@@ -35,7 +36,7 @@
 # Set up display & add group
 i2c = board.I2C()  # uses board.SCL and board.SDA
 # i2c = board.STEMMA_I2C()  # For using the built-in STEMMA QT connector on a microcontroller
-display_bus = displayio.I2CDisplay(i2c, device_address=0x3C)
+display_bus = i2cdisplaybus.I2CDisplayBus(i2c, device_address=0x3C)
 display = adafruit_displayio_ssd1306.SSD1306(display_bus, width=128, height=32)
 group = displayio.Group()
 display.root_group = group

MIDI_Melody_Maker/code.py

@@ -12,6 +12,7 @@
 from digitalio import DigitalInOut, Direction, Pull
 from analogio import AnalogIn
 import displayio
+import i2cdisplaybus
 import adafruit_imageload
 from adafruit_display_text import label
 import adafruit_displayio_ssd1306
@@ -34,7 +35,7 @@
 # Use for I2C for STEMMA OLED
 i2c = board.I2C()  # uses board.SCL and board.SDA
 # i2c = board.STEMMA_I2C()  # For using the built-in STEMMA QT connector on a microcontroller
-display_bus = displayio.I2CDisplay(i2c, device_address=0x3D, reset=oled_reset)
+display_bus = i2cdisplaybus.I2CDisplayBus(i2c, device_address=0x3D, reset=oled_reset)
 
 #  STEMMA OLED dimensions. can have height of 64, but 32 makes text larger
 WIDTH = 128