Add XIAO S3 and Espressif ESP32-S3 DevkitC-1 N8

Author: tyeth

platformio.ini

@@ -345,26 +345,47 @@ board = adafruit_qtpy_esp32s3_nopsram
 build_flags = -DARDUINO_ADAFRUIT_QTPY_ESP32S3_NOPSRAM
 extra_scripts = pre:rename_usb_config.py
 
+
 ; Espressif ESP32-S3 NO PSRAM espressif_esp32s3_devkitc_1_n8
 [env:espressif_esp32s3_devkitc_1_n8]
 extends = common:esp32
 board = esp32-s3-devkitc-1
+build_flags = -DARDUINO_ESPRESSIF_ESP32S3_DEVKITC_1_N8 -DUSE_TINYUSB=1 -DARDUINO_USB_MODE=0 -DARDUINO_USB_CDC_ON_BOOT=1
+board_build.partitions = noota_ffat.csv
+; board_build.partitions = tinyuf2-partitions-8MB.csv
+; extra_scripts = pre:rename_usb_config.py
+
+; Espressif ESP32-S3 NO PSRAM espressif_esp32s3_devkitc_1_n8 (DEBUG)
+[env:espressif_esp32s3_devkitc_1_n8_debug]
+extends = common:esp32
+board = esp32-s3-devkitc-1
 build_type = debug
-build_flags = 
+build_flags =
     -DUSE_TINYUSB=1
+    -DARDUINO_USB_MODE=0
+    -DARDUINO_USB_CDC_ON_BOOT=1
     -DARDUINO_ESPRESSIF_ESP32S3_DEVKITC_1_N8
     -DDEBUG=1
     -DESP_LOG_LEVEL=5
-    -DARDUINO_CORE_DEBUG_LEVEL=5
-    -DARDUINO_DEBUG_LEVEL=5
-    ; -DARDUINO_DEBUG_OUTPUT=Serial
-    ; -DARDUINO_DEBUG_BAUD=115200
+    -DARDUINO_CORE_LOG_LEVEL=5
     -DARDUINO_LOG_LEVEL=5
-    -DCORE_DEBUG_LEVEL=5
     -DARDUHAL_LOG_LEVEL=5
+; board_build.partitions = tinyuf2-partitions-8MB.csv
+board_build.partitions = noota_ffat.csv
+; extra_scripts = pre:rename_usb_config.py
+
+; Seeed Studio ESP32 boards:
+
+; Xiao ESP32S3 N8R8 (SENSE)
+[env:seeed-xiao_esp32s3_n8r8]
+extends = common:esp32
+board = seeed_xiao_esp32s3
+build_flags = -DARDUINO_XIAO_ESP32S3 -DUSE_TINYUSB -DBOARD_HAS_PSRAM -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MODE=0
 board_build.partitions = tinyuf2-partitions-8MB.csv
 extra_scripts = pre:rename_usb_config.py
 
+
+
 ; ESP8266 Boards
 
 ; Adafruit Feather HUZZAH ESP8266

src/Wippersnapper_Boards.h

@@ -259,6 +259,23 @@
 #define USE_STATUS_NEOPIXEL
 #define STATUS_NEOPIXEL_PIN PIN_NEOPIXEL
 #define STATUS_NEOPIXEL_NUM 1
+#elif defined(ARDUINO_ESP32S3_DEV)
+#define BOARD_ID "esp32s3-devkitc-1-n8"
+#define USE_TINYUSB
+#define USE_STATUS_NEOPIXEL
+#define STATUS_NEOPIXEL_PIN 48
+#define STATUS_NEOPIXEL_NUM 1
+#ifdef BOARD_HAS_PSRAM
+#define USE_PSRAM ///< Board has PSRAM, use it for dynamic memory allocation
+// Update board ID if PSRAM is present, needs new board definition
+#endif
+#elif defined(ARDUINO_XIAO_ESP32S3)
+#define BOARD_ID "xiao-esp32s3"
+#define BOARD_HAS_PSRAM
+#define USE_PSRAM
+#define USE_TINYUSB
+#define USE_STATUS_LED
+#define STATUS_LED_PIN LED_BUILTIN
 #else
 #warning "Board type not identified within Wippersnapper_Boards.h!"
 #endif

src/provisioning/tinyusb/Wippersnapper_FS.cpp

@@ -14,10 +14,10 @@
  */
 #if defined(ARDUINO_MAGTAG29_ESP32S2) || defined(ARDUINO_METRO_ESP32S2) ||     \
     defined(ARDUINO_METRO_ESP32S3) || defined(ARDUINO_FUNHOUSE_ESP32S2) ||     \
-    defined(ADAFRUIT_PYPORTAL_M4_TITANO) ||                                    \
+    defined(ADAFRUIT_PYPORTAL_M4_TITANO) || defined(ARDUINO_ESP32S3_DEV) ||    \
     defined(ADAFRUIT_METRO_M4_AIRLIFT_LITE) || defined(ADAFRUIT_PYPORTAL) ||   \
     defined(ARDUINO_ADAFRUIT_FEATHER_ESP32S2) ||                               \
-    defined(ARDUINO_ADAFRUIT_QTPY_ESP32S2) ||                                  \
+    defined(ARDUINO_ADAFRUIT_QTPY_ESP32S2) || defined(ARDUINO_XIAO_ESP32S3) || \
     defined(ARDUINO_ADAFRUIT_FEATHER_ESP32S2_TFT) ||                           \
     defined(ARDUINO_ADAFRUIT_FEATHER_ESP32S3_NOPSRAM) ||                       \
     defined(ARDUINO_ADAFRUIT_QTPY_ESP32S3_NOPSRAM) ||                          \