- add slash screen for CLUE

- optimize ST77XX_SWRESET, skip if reset pin is available.

Author: hathach

CMakeLists.txt

@@ -1,4 +1,5 @@
 cmake_minimum_required(VERSION 3.17)
+find_package(Python COMPONENTS Interpreter)
 
 if (NOT DEFINED BOARD)
   message(FATAL_ERROR "BOARD is not defined")
@@ -30,6 +31,9 @@ set(SDK ${CMAKE_CURRENT_LIST_DIR}/lib/sdk/components)
 set(SOFTDEVICE ${CMAKE_CURRENT_LIST_DIR}/lib/softdevice)
 set(TUSB ${CMAKE_CURRENT_LIST_DIR}/lib/tinyusb/src)
 
+set(UF2CONV_PY ${CMAKE_CURRENT_LIST_DIR}/lib/uf2/utils/uf2conv.py)
+set(UF2_FAMILY_ID_BOOTLOADER 0xd663823c)
+
 #-------------------
 # Bootloader
 #-------------------
@@ -301,6 +305,8 @@ add_custom_command(TARGET bootloader POST_BUILD
 add_custom_command(TARGET bootloader POST_BUILD
   COMMAND ${CMAKE_OBJCOPY} -Obinary $<TARGET_FILE:bootloader> $<TARGET_FILE_DIR:bootloader>/bootloader.bin
   COMMAND ${CMAKE_OBJCOPY} -Oihex $<TARGET_FILE:bootloader> $<TARGET_FILE_DIR:bootloader>/bootloader.hex
+  COMMAND ${Python_EXECUTABLE} ${CMAKE_CURRENT_LIST_DIR}/tools/hexmerge.py --overlap=replace -o $<TARGET_FILE_DIR:bootloader>/bootloader_mbr.hex $<TARGET_FILE_DIR:bootloader>/bootloader.hex ${MBR_HEX}
+  COMMAND ${Python_EXECUTABLE} ${UF2CONV_PY} -f ${UF2_FAMILY_ID_BOOTLOADER} -c -o $<TARGET_FILE_DIR:bootloader>/bootloader_mbr.uf2 $<TARGET_FILE_DIR:bootloader>/bootloader_mbr.hex
   VERBATIM)
 
 #----------------------------------
@@ -311,11 +317,16 @@ if (NOT DEFINED NRFJPROG)
   set(NRFJPROG nrfjprog)
 endif()
 
-add_custom_target(flash
+add_custom_target(flash-jlink
   DEPENDS bootloader
   COMMAND ${NRFJPROG} --program $<TARGET_FILE:bootloader> --verify --sectoranduicrerase -f nrf52 --reset
   )
 
+add_custom_target(flash-uf2
+  DEPENDS bootloader
+  COMMAND ${Python_EXECUTABLE} ${UF2CONV_PY} -f ${UF2_FAMILY_ID_BOOTLOADER} --deploy $<TARGET_FILE_DIR:bootloader>/bootloader_mbr.uf2
+  )
+
 add_custom_target(flash-sd
   COMMAND ${NRFJPROG} --program ${SD_HEX} --verify --sectorerase -f nrf52 --reset
   )

src/boards/boards.c

@@ -255,6 +255,7 @@ void board_display_init(void) {
   nrf_gpio_pin_clear(DISPLAY_PIN_RST);
   NRFX_DELAY_MS(10);
   nrf_gpio_pin_set(DISPLAY_PIN_RST);
+  NRFX_DELAY_MS(20);
 #endif
 
 #if defined(DISPLAY_PIN_BL) && DISPLAY_PIN_BL >= 0
@@ -698,6 +699,7 @@ void neopixel_write (uint8_t *pixels) {
 #define ST77XX_TEOFF 0x34
 #define ST77XX_TEON 0x35
 #define ST77XX_MADCTL 0x36
+#define ST77XX_VSCSAD 0x37
 #define ST77XX_COLMOD 0x3A
 
 #define ST77XX_MADCTL_MY 0x80
@@ -725,23 +727,27 @@ void neopixel_write (uint8_t *pixels) {
 static void tft_controller_init(void) {
   // Init commands for 7789 screens
   uint8_t cmdinit_st7789[] = {
-      //  1: Software reset, no args, w/delay ~150 ms delay
+      #if !defined(DISPLAY_PIN_RST) || (DISPLAY_PIN_RST < 0)
+      // Software reset if rst pin not available, no args, w/delay ~150 ms delay
       ST77XX_SWRESET, ST_CMD_DELAY, 150,
-      //  2: Out of sleep mode, no args, w/delay 10 ms delay
+      #endif
+      // Out of sleep mode, no args, w/delay 10 ms delay
       ST77XX_SLPOUT, ST_CMD_DELAY, 10,
-      //  3: Set color mode, 1 arg + delay: 16-bit color, 10 ms delay
+      // Set color mode, 1 arg + delay: 16-bit color, 10 ms delay
       ST77XX_COLMOD, 1 + ST_CMD_DELAY, 0x55, 10,
-      //  4: Mem access ctrl (directions), 1 arg: Row/col addr, bottom-top refresh
+      // Mem access ctrl (directions), 1 arg: Row/col addr, bottom-top refresh
       ST77XX_MADCTL, 1, DISPLAY_MADCTL,
-      //  5: Column addr set, 4 args, no delay: XSTART = 0, XEND = 240
+      // Vertical Scroll Start Address of RAM
+      // ST77XX_VSCSAD, 2, DISPLAY_VSCSAD >> 8, DISPLAY_VSCSAD & 0xFF,
+      // Column addr set, 4 args, no delay: XSTART = 0, XEND = 240
       ST77XX_CASET, 4, 0x00, 0, 0, 240,
-      //  6: Row addr set, 4 args, no delay: YSTART = 0 YEND = 320
+      // Row addr set, 4 args, no delay: YSTART = 0 YEND = 320
       ST77XX_RASET, 4, 0x00, 0, 320 >> 8, 320 & 0xFF,
-      //  7: hack
+      // Inversion on
       ST77XX_INVON, ST_CMD_DELAY, 10,
-      //  8: Normal display on, no args, w/delay 10 ms delay
+      // Normal display on, no args, w/delay 10 ms delay
       ST77XX_NORON, ST_CMD_DELAY, 10,
-      //  9: Main screen turn on, no args, delay 10 ms delay
+      // Main screen turn on, no args, delay 10 ms delay
       ST77XX_DISPON, ST_CMD_DELAY, 10
   };
 

src/boards/circuitplayground_nrf52840/board.cmake

@@ -0,0 +1 @@
+set(MCU_VARIANT nrf52840)

src/boards/clue_nrf52840/board.cmake

@@ -0,0 +1 @@
+set(MCU_VARIANT nrf52840)

src/boards/clue_nrf52840/board.h

@@ -46,6 +46,32 @@
 #define BUTTON_2              _PINNUM(1, 10)     // right button
 #define BUTTON_PULL           NRF_GPIO_PIN_PULLUP
 
+//--------------------------------------------------------------------+
+// Display
+//--------------------------------------------------------------------+
+#define DISPLAY_CONTROLLER_ST7789
+
+#define DISPLAY_PIN_SCK       _PINNUM(0, 14)
+#define DISPLAY_PIN_MOSI      _PINNUM(0, 15)
+
+#define DISPLAY_PIN_CS        _PINNUM(0, 12)
+#define DISPLAY_PIN_DC        _PINNUM(0, 13)
+#define DISPLAY_PIN_RST       _PINNUM(1,  3)
+#define DISPLAY_PIN_BL        _PINNUM(1,  5)
+#define DISPLAY_BL_ON         1  // GPIO state to enable back light
+
+#define DISPLAY_WIDTH         240
+#define DISPLAY_HEIGHT        240
+
+#define DISPLAY_COL_OFFSET    0
+#define DISPLAY_ROW_OFFSET    80
+
+// Memory Data Access Control & // Vertical Scroll Start Address
+#define DISPLAY_MADCTL        (TFT_MADCTL_MY)
+#define DISPLAY_VSCSAD        0
+
+#define DISPLAY_TITLE         "CLUE"
+
 //--------------------------------------------------------------------+
 // BLE OTA
 //--------------------------------------------------------------------+

src/boards/feather_nrf52840_sense_tft/board.h

@@ -52,8 +52,8 @@
 //--------------------------------------------------------------------+
 #define DISPLAY_CONTROLLER_ST7789
 
-#define DISPLAY_PIN_MOSI      _PINNUM(0,  5)
 #define DISPLAY_PIN_SCK       _PINNUM(0, 26)
+#define DISPLAY_PIN_MOSI      _PINNUM(0,  5)
 
 #define DISPLAY_PIN_CS        _PINNUM(1,  5)
 #define DISPLAY_PIN_DC        _PINNUM(1,  1)