Update board_id, description and images for the VIDI X V1.1

Author: lovrojakic

_board/vidi_x.md

@@ -0,0 +1,65 @@
+---
+layout: download
+board_id: "vidi_x_v1.1"
+title: "VIDI X V1.1 Download"
+name: "VIDI X V1.1"
+manufacturer: "VIDI"
+board_url:
+ - "https://vidi-x.org/"
+board_image: "vidi_x_v1.1.jpg"
+date_added: 2024-09-10
+family: esp32
+downloads_display: true
+features:
+  - Battery Charging
+  - Bluetooth/BTLE
+  - Display
+  - Speaker
+  - STEMMA QT/QWIIC
+  - Wi-Fi
+---
+
+# VIDI X Microcomputer
+
+VIDI X microcomputer was developed by VIDI - a company devoted to the idea of making exceptional tools for STEAM education. VIDI X microcomputer is part of the [education solution for engaging computer science](https://vidi-x.org/discover-vidi-x/).
+
+## VIDI X V1.1
+
+Microcomputer designed for use in education, based on ESP32 Wrover IB, with modular circuit featuring removable touch screen and buttons. 
+
+Built-in expansion possibility with additional sensors or microcomputers via 28 pin expansion with male and female headers (I2C, I2S, SPI, UART, GPIO, IRQ - 3.3 V). All connectors are installed in male and female versions. There is also an I2C (VIDIIC) connector for easier connection to I2C sensors and actuators.  
+
+### Technical Specifications
+
+- **Built-in memory:** 8 MB of SPI flash memory. 
+- **Microprocessor:** Low power microprocessor with two cores ESP32 Wrover IB. 
+- **Operating frequency:** 240 MHz. 
+- **LCD touch screen:** 2.8“ TFT ILI9341 
+- **Resolution:** 320x240 pixels. 
+- **Touch screen:** Controllable with the included stylus or finger. 
+- **Wi-Fi:** 802.11 b/g/n. 
+- **Bluetooth:** v4.2 BR/EDR, BLE; (2.402 GHz - 2.480 GHz). 
+- **Infrared:** Receiver and transmitter. 
+- **Power supply and programming:** Micro USB. 
+- **Audio connection:** 4-pole 0.14” (3.5 mm) combo audio jack.
+- **Microphone:** With microphone preamplifier, located on the top of the device. 
+- **SD card slot:** Built-in, in the back of the ILI9341 screen. 
+- **Sound adjustment:** Software and hardware sound level adjustment. 
+- **Hardware switch:** Wheel for changing the sound level on the speaker. 
+- **LEDs:** 9 LE Diodes. 5 of those are addressable WS2812B RGB LEDs. 
+  - **Indications:** ON/OFF indication, RX, TX indication and programmable. 
+- **Buttons:** 10 buttons for control and management: Up, Down, Left, Right, Menu, Volume, Select, Start, A and B buttons. 
+- **VIDIIC connector:** For I2C compatible sensors and actuators 
+- **Power supply options:** 
+  - 3 x 1.2V or 3 x 1.5V (rechargeable or replaceable AA batteries)
+  - USB cable power supply (Minimum with 3.3 V to maximum 5.1 V, USB cable 5 V according to USB specification)
+- **Compatibility:** Possible connection with micro:bit, Arduino and other microcontrollers.
+
+### Lesson Plans 
+
+VIDI X education method features [C++ and Python lesson plans](https://vidi-x.org/discover-vidi-x/#middle) for Middle and High School. 
+
+### Purchase
+
+[VIDI X](https://vidi-x.org/contact/) <br>
+Contact: [[email protected]](mailto:[email protected])