Correct the pin name and add the monitor battry function

Author: 0hotpotman0

ports/nrf/boards/Seeed_XIAO_nRF52840_Sense/mpconfigboard.mk

@@ -1,6 +1,6 @@
 USB_VID = 0x2886
 USB_PID = 0x0045
-USB_PRODUCT = "XIAO nRF52840 Sense"
+USB_PRODUCT = "Seeed XIAO nRF52840 Sense"
 USB_MANUFACTURER = "Seeed"
 
 MCU_CHIP = nrf52840

ports/nrf/boards/Seeed_XIAO_nRF52840_Sense/pins.c

@@ -33,20 +33,24 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
     { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_P0_05) },
     { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_P0_04) },
 
-    { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_P0_26) },
+    { MP_ROM_QSTR(MP_QSTR_LED_USR), MP_ROM_PTR(&pin_P0_26) },
     { MP_ROM_QSTR(MP_QSTR_RED_LED), MP_ROM_PTR(&pin_P0_26) },
     { MP_ROM_QSTR(MP_QSTR_BLUE_LED), MP_ROM_PTR(&pin_P0_06) },
     { MP_ROM_QSTR(MP_QSTR_GREEN_LED), MP_ROM_PTR(&pin_P0_30) },
 
-    { MP_ROM_QSTR(MP_QSTR_6D_PWR), MP_ROM_PTR(&pin_P1_08) },
-    { MP_ROM_QSTR(MP_QSTR_6D_SCL), MP_ROM_PTR(&pin_P0_27) },
-    { MP_ROM_QSTR(MP_QSTR_6D_SDA), MP_ROM_PTR(&pin_P0_07) },
-    { MP_ROM_QSTR(MP_QSTR_6D_INT1), MP_ROM_PTR(&pin_P0_11) },
+    { MP_ROM_QSTR(MP_QSTR_IMU_PWR), MP_ROM_PTR(&pin_P1_08) },
+    { MP_ROM_QSTR(MP_QSTR_IMU_SCL), MP_ROM_PTR(&pin_P0_27) },
+    { MP_ROM_QSTR(MP_QSTR_IMU_SDA), MP_ROM_PTR(&pin_P0_07) },
+    { MP_ROM_QSTR(MP_QSTR_IMU_INT1), MP_ROM_PTR(&pin_P0_11) },
 
     { MP_ROM_QSTR(MP_QSTR_MIC_PWR), MP_ROM_PTR(&pin_P1_10) },
     { MP_ROM_QSTR(MP_QSTR_PDM_CLK), MP_ROM_PTR(&pin_P1_00) },
     { MP_ROM_QSTR(MP_QSTR_PDM_DATA), MP_ROM_PTR(&pin_P0_16) },
 
+    {MP_ROM_QSTR(MP_QSTR_READ_BATT_ENABLE),MP_ROM_PTR(&pin_P0_14)},
+    {MP_ROM_QSTR(MP_QSTR_VBATT),MP_ROM_PTR(&pin_P0_31)},
+    {MP_ROM_QSTR(MP_QSTR_CHARGE_STATUS),MP_ROM_PTR(&pin_P0_17)},
+
     { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
     { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
     { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },