Merge pull request #5542 from weblate/weblate-circuitpython-main

Translations update from Weblate

Author: jepler

locale/ID.po

@@ -354,6 +354,7 @@ msgstr "pow() 3-arg tidak didukung"
 msgid "64 bit types"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -634,6 +635,10 @@ msgstr "Penyangga harus memiliki panjang setidaknya 1"
 msgid "Buffer too short by %d bytes"
 msgstr "Buffer terlalu pendek untuk %d byte"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "Buffers must be same size"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
 #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
@@ -1607,6 +1612,10 @@ msgstr "Tidak ada pin TX"
 msgid "No available clocks"
 msgstr "Tidak ada clocks yang tersedia"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "No capture in progress"
+msgstr ""
+
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
 msgstr "Tidak ada koneksi: panjang tidak dapat ditentukan"
@@ -1627,6 +1636,7 @@ msgstr "Tidak ada perangkat keras acak yang tersedia"
 msgid "No hardware support on clk pin"
 msgstr "Tidak ada dukungan perangkat keras pada pin clk"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "No hardware support on pin"
@@ -1750,7 +1760,6 @@ msgstr ""
 msgid "Only connectable advertisements can be directed"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Only edge detection is available on this hardware"
 msgstr ""
@@ -1849,6 +1858,7 @@ msgstr "Periferal sedang digunakan"
 msgid "Permission denied"
 msgstr "Izin ditolak"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Pin cannot wake from Deep Sleep"
 msgstr ""
@@ -2209,6 +2219,10 @@ msgstr "Tingkat sampel dari sampel tidak cocok dengan mixer"
 msgid "The sample's signedness does not match the mixer's"
 msgstr "signedness dari sampel tidak cocok dengan mixer"
 
+#: shared-module/imagecapture/ParallelImageCapture.c
+msgid "This microcontroller does not support continuous capture."
+msgstr ""
+
 #: shared-module/paralleldisplay/ParallelBus.c
 msgid ""
 "This microcontroller only supports data0=, not data_pins=, because it "
@@ -3917,6 +3931,7 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_funhouse/mpconfigboard.h

locale/cs.po

@@ -350,6 +350,7 @@ msgstr ""
 msgid "64 bit types"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -628,6 +629,10 @@ msgstr ""
 msgid "Buffer too short by %d bytes"
 msgstr ""
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "Buffers must be same size"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
 #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
@@ -1590,6 +1595,10 @@ msgstr ""
 msgid "No available clocks"
 msgstr ""
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "No capture in progress"
+msgstr ""
+
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
 msgstr ""
@@ -1610,6 +1619,7 @@ msgstr ""
 msgid "No hardware support on clk pin"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "No hardware support on pin"
@@ -1730,7 +1740,6 @@ msgstr ""
 msgid "Only connectable advertisements can be directed"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Only edge detection is available on this hardware"
 msgstr ""
@@ -1825,6 +1834,7 @@ msgstr ""
 msgid "Permission denied"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Pin cannot wake from Deep Sleep"
 msgstr ""
@@ -2178,6 +2188,10 @@ msgstr ""
 msgid "The sample's signedness does not match the mixer's"
 msgstr ""
 
+#: shared-module/imagecapture/ParallelImageCapture.c
+msgid "This microcontroller does not support continuous capture."
+msgstr ""
+
 #: shared-module/paralleldisplay/ParallelBus.c
 msgid ""
 "This microcontroller only supports data0=, not data_pins=, because it "
@@ -3883,6 +3897,7 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_funhouse/mpconfigboard.h

locale/de_DE.po

@@ -356,6 +356,7 @@ msgstr "3-arg pow() wird nicht unterstützt"
 msgid "64 bit types"
 msgstr "64 bit Typen"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -636,6 +637,10 @@ msgstr "Der Puffer muss eine Mindestenslänge von 1 haben"
 msgid "Buffer too short by %d bytes"
 msgstr "Puffer um %d Bytes zu kurz"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "Buffers must be same size"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
 #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
@@ -1608,6 +1613,10 @@ msgstr "Kein TX Pin"
 msgid "No available clocks"
 msgstr "Keine Taktgeber verfügbar"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "No capture in progress"
+msgstr ""
+
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
 msgstr "Keine Verbindung: Länge kann nicht bestimmt werden"
@@ -1628,6 +1637,7 @@ msgstr "Kein hardware random verfügbar"
 msgid "No hardware support on clk pin"
 msgstr "Keine Hardwareunterstützung am clk Pin"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "No hardware support on pin"
@@ -1752,7 +1762,6 @@ msgstr ""
 msgid "Only connectable advertisements can be directed"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Only edge detection is available on this hardware"
 msgstr ""
@@ -1849,6 +1858,7 @@ msgstr ""
 msgid "Permission denied"
 msgstr "Zugang verweigert"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Pin cannot wake from Deep Sleep"
 msgstr ""
@@ -2209,6 +2219,10 @@ msgid "The sample's signedness does not match the mixer's"
 msgstr ""
 "Die Art des Vorzeichens des Samples stimmt nicht mit dem des Mixers überein"
 
+#: shared-module/imagecapture/ParallelImageCapture.c
+msgid "This microcontroller does not support continuous capture."
+msgstr ""
+
 #: shared-module/paralleldisplay/ParallelBus.c
 msgid ""
 "This microcontroller only supports data0=, not data_pins=, because it "
@@ -3946,6 +3960,7 @@ msgstr "pow() drittes Argument darf nicht 0 sein"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() mit 3 Argumenten erfordert Integer"
 
+#: ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_funhouse/mpconfigboard.h

locale/el.po

@@ -347,6 +347,7 @@ msgstr ""
 msgid "64 bit types"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -625,6 +626,10 @@ msgstr ""
 msgid "Buffer too short by %d bytes"
 msgstr ""
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "Buffers must be same size"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
 #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
@@ -1587,6 +1592,10 @@ msgstr ""
 msgid "No available clocks"
 msgstr ""
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "No capture in progress"
+msgstr ""
+
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
 msgstr ""
@@ -1607,6 +1616,7 @@ msgstr ""
 msgid "No hardware support on clk pin"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "No hardware support on pin"
@@ -1727,7 +1737,6 @@ msgstr ""
 msgid "Only connectable advertisements can be directed"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Only edge detection is available on this hardware"
 msgstr ""
@@ -1822,6 +1831,7 @@ msgstr ""
 msgid "Permission denied"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Pin cannot wake from Deep Sleep"
 msgstr ""
@@ -2175,6 +2185,10 @@ msgstr ""
 msgid "The sample's signedness does not match the mixer's"
 msgstr ""
 
+#: shared-module/imagecapture/ParallelImageCapture.c
+msgid "This microcontroller does not support continuous capture."
+msgstr ""
+
 #: shared-module/paralleldisplay/ParallelBus.c
 msgid ""
 "This microcontroller only supports data0=, not data_pins=, because it "
@@ -3880,6 +3894,7 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_funhouse/mpconfigboard.h

locale/en_GB.po

@@ -356,6 +356,7 @@ msgstr "3-arg pow() not supported"
 msgid "64 bit types"
 msgstr "64 bit types"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -636,6 +637,10 @@ msgstr "Buffer must be at least length 1"
 msgid "Buffer too short by %d bytes"
 msgstr "Buffer too short by %d bytes"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "Buffers must be same size"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
 #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
@@ -1602,6 +1607,10 @@ msgstr "No TX pin"
 msgid "No available clocks"
 msgstr "No available clocks"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "No capture in progress"
+msgstr ""
+
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
 msgstr "No connection: length cannot be determined"
@@ -1622,6 +1631,7 @@ msgstr "No hardware random available"
 msgid "No hardware support on clk pin"
 msgstr "No hardware support on clk pin"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "No hardware support on pin"
@@ -1744,7 +1754,6 @@ msgstr ""
 msgid "Only connectable advertisements can be directed"
 msgstr "Only connectable advertisements can be directed"
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Only edge detection is available on this hardware"
 msgstr "Only edge detection is available on this hardware"
@@ -1843,6 +1852,7 @@ msgstr "Peripheral in use"
 msgid "Permission denied"
 msgstr "Permission denied"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Pin cannot wake from Deep Sleep"
 msgstr "Pin cannot wake from Deep Sleep"
@@ -2206,6 +2216,10 @@ msgstr "The sample's sample rate does not match the mixer's"
 msgid "The sample's signedness does not match the mixer's"
 msgstr "The sample's signedness does not match the mixer's"
 
+#: shared-module/imagecapture/ParallelImageCapture.c
+msgid "This microcontroller does not support continuous capture."
+msgstr ""
+
 #: shared-module/paralleldisplay/ParallelBus.c
 msgid ""
 "This microcontroller only supports data0=, not data_pins=, because it "
@@ -3917,6 +3931,7 @@ msgstr "pow() 3rd argument cannot be 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() with 3 arguments requires integers"
 
+#: ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_funhouse/mpconfigboard.h