Skip to content

Commit 2098c62

Browse files
SeanTheITGuySeanTheITGuy
committed
still fighting
1 parent ec4cb22 commit 2098c62

File tree

4 files changed

+2
-270
lines changed

4 files changed

+2
-270
lines changed

‎ports/espressif/boards/elecrow_crowpanel_4_2_epaper/board.c‎

Lines changed: 1 addition & 130 deletions
Original file line numberDiff line numberDiff line change
@@ -1,138 +1,9 @@
11
// This file is part of the CircuitPython project: https://circuitpython.org
22
//
3-
// SPDX-FileCopyrightText: Copyright (c) 2020 Joey Castillo
3+
// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
44
//
55
// SPDX-License-Identifier: MIT
66

77
#include "supervisor/board.h"
8-
#include "mpconfigboard.h"
9-
#include "shared-bindings/busio/SPI.h"
10-
#include "shared-bindings/fourwire/FourWire.h"
11-
#include "shared-bindings/microcontroller/Pin.h"
12-
#include "shared-module/displayio/__init__.h"
13-
#include "shared-module/displayio/mipi_constants.h"
14-
#include "shared-bindings/board/__init__.h"
15-
#include "shared-bindings/digitalio/DigitalInOut.h"
16-
17-
#define HEIGHT 300
18-
#define WIDTH 400
19-
20-
// Sequences pulled from InkyWhat driver (https://github.com/alanta/CircuitPython_InkyWhat)
21-
uint8_t start_sequence[] = {
22-
0x12, 0x80, 0x80, // Software reset ✅ TODO wait for busy instead of fixed delay
23-
0x12, 0x80, 0x80, // Software reset ✅ TODO wait for busy instead of fixed delay
24-
0x74, 0x01, 0x54, // set analog block control ✅
25-
0x7e, 0x01, 0x3b, // set digital block control ✅
26-
0x01, 0x03, 0x2b, 0x01, 0x00, // driver output control
27-
0x03, 0x01, 0x17, // Gate driving voltage ✅
28-
0x04, 0x03, 0x07, 0xac, 0x32, // Source Driving voltage ✅
29-
0x3a, 0x01, 0x07, // Dummy line period ✅
30-
0x3b, 0x01, 0x04, // Gate line width ✅
31-
0x3c, 0x01, 0x00, // Border color
32-
0x2c, 0x01, 0x3c, // VCOM Register, 0x3c = -1.5v? ✅
33-
0x22, 0x01, 0xc7, // Display update sequence ✅
34-
0x04, 0x03, 0x07, 0xac, 0x32, // Set voltage of VSH and VSL (yellow)
35-
// LUT (yellow)
36-
0x32, 0x46,
37-
0xfa, 0x94, 0x8c, 0xc0, 0xd0, 0x00, 0x00,
38-
0xfa, 0x94, 0x2c, 0x80, 0xe0, 0x00, 0x00,
39-
0xfa, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
40-
0xfa, 0x94, 0xf8, 0x80, 0x50, 0x00, 0xcc,
41-
0xbf, 0x58, 0xfc, 0x80, 0xd0, 0x00, 0x11,
42-
0x40, 0x10, 0x40, 0x10, 0x08,
43-
0x08, 0x10, 0x04, 0x04, 0x10,
44-
0x08, 0x08, 0x03, 0x08, 0x20,
45-
0x08, 0x04, 0x00, 0x00, 0x10,
46-
0x10, 0x08, 0x08, 0x00, 0x20,
47-
0x00, 0x00, 0x00, 0x00, 0x00,
48-
0x00, 0x00, 0x00, 0x00, 0x00,
49-
0x11, 0x01, 0x03, // Data entry mode setting 0x03 = X/Y increment ✅
50-
// self._send_command(0x44, [0x00, (self.cols // 8) - 1]) # Set RAM X Start/End
51-
0x44, 0x02, 0x00, 0x31, // Set RAM X Start/End
52-
// self._send_command(0x45, [0x00, 0x00] + packed_height) # Set RAM Y Start/End
53-
0x45, 0x04, 0x00, 0x00, 0x2b, 0x01, // Set RAM Y Start/End
54-
};
55-
56-
uint8_t stop_sequence[] = {
57-
0x10, 0x01, 0x01 // Enter Deep Sleep
58-
};
59-
60-
uint8_t refresh_sequence[] = {
61-
0x20, 0x00
62-
};
63-
64-
void board_init(void) {
65-
66-
// Pull EPD Enable pin high
67-
digitalio_digitalinout_obj_t vext_pin_obj;
68-
vext_pin_obj.base.type = &digitalio_digitalinout_type;
69-
common_hal_digitalio_digitalinout_construct(&vext_pin_obj, &pin_GPIO7);
70-
common_hal_digitalio_digitalinout_switch_to_output(&vext_pin_obj, true, DRIVE_MODE_PUSH_PULL);
71-
common_hal_digitalio_digitalinout_never_reset(&vext_pin_obj);
72-
73-
// Set up SPI bus
74-
fourwire_fourwire_obj_t *bus = &allocate_display_bus()->fourwire_bus;
75-
busio_spi_obj_t *spi = &bus->inline_bus;
76-
common_hal_busio_spi_construct(spi, &pin_GPIO12, &pin_GPIO11, NULL, false);
77-
common_hal_busio_spi_never_reset(spi);
78-
79-
bus->base.type = &fourwire_fourwire_type;
80-
common_hal_fourwire_fourwire_construct(bus,
81-
spi,
82-
&pin_GPIO46, // EPD_DC Command or data
83-
&pin_GPIO45, // EPD_CS Chip select
84-
&pin_GPIO47, // EPD_RST Reset
85-
1000000, // Baudrate
86-
0, // Polarity
87-
0); // Phase
88-
89-
// Set up EPD object
90-
epaperdisplay_epaperdisplay_obj_t *display = &allocate_display()->epaper_display;
91-
display->base.type = &epaperdisplay_epaperdisplay_type;
92-
common_hal_epaperdisplay_epaperdisplay_construct(display,
93-
bus,
94-
start_sequence,
95-
sizeof(start_sequence),
96-
0, // start up time
97-
stop_sequence,
98-
sizeof(stop_sequence),
99-
WIDTH, // width
100-
HEIGHT, // height
101-
300, // RAM width
102-
400, // RAM height
103-
0, // colstart
104-
0, // rowstart
105-
90, // rotation
106-
NO_COMMAND, // set_column_window_command
107-
NO_COMMAND, // set_row_window_command
108-
0x4E, // set_current_column_command
109-
0x4F, // set_current_row_command
110-
0x24, // write_black_ram_command
111-
false, // black_bits_inverted
112-
0x26, // write_color_ram_command (can add this for grayscale eventually)
113-
false, // color_bits_inverted
114-
0x000000, // highlight_color
115-
refresh_sequence, // refresh_display_sequence
116-
sizeof(refresh_sequence),
117-
40, // refresh_time
118-
&pin_GPIO48, // busy_pin
119-
false, // busy_state
120-
5, // seconds_per_frame
121-
false, // chip_select (don't always toggle chip select)
122-
false, // grayscale
123-
false, // acep
124-
false, // two_byte_sequence_length
125-
false); // address_little_endian
126-
}
127-
128-
void board_deinit(void) {
129-
epaperdisplay_epaperdisplay_obj_t *display = &displays[0].epaper_display;
130-
if (display->base.type == &epaperdisplay_epaperdisplay_type) {
131-
while (common_hal_epaperdisplay_epaperdisplay_get_busy(display)) {
132-
RUN_BACKGROUND_TASKS;
133-
}
134-
}
135-
common_hal_displayio_release_displays();
136-
}
1378

1389
// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.

‎ports/espressif/boards/elecrow_crowpanel_4_2_epaper/board.c.epd‎

Lines changed: 0 additions & 138 deletions
This file was deleted.

‎ports/espressif/boards/elecrow_crowpanel_4_2_epaper/mpconfigboard.mk‎

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -9,7 +9,7 @@ CIRCUITPY_ESP_USB_SERIAL_JTAG = 0
99
IDF_TARGET = esp32s3
1010

1111
CIRCUITPY_ESP_FLASH_SIZE = 8MB
12-
CIRCUITPY_ESP_FLASH_MODE = dio
12+
CIRCUITPY_ESP_FLASH_MODE = qio
1313
CIRCUITPY_ESP_FLASH_FREQ = 80m
1414

1515
CIRCUITPY_ESP_PSRAM_SIZE = 8MB

‎ports/espressif/boards/elecrow_crowpanel_4_2_epaper/sdkconfig‎

Lines changed: 0 additions & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -7,7 +7,6 @@
77
#
88
# LWIP
99
#
10-
CONFIG_ESP_PHY_ENABLE_USB=n
1110
# end of LWIP
1211

1312
# end of Component config

0 commit comments

Comments
 (0)