Update to v1.3

Author: sabas1080

ports/atmel-samd/boards/nfc_copy/board.c renamed to ports/atmel-samd/boards/nfc_copy_cat/board.c

@@ -1,23 +1,24 @@
 #define MICROPY_HW_BOARD_NAME "Electronic Cats NFC Copy Cat"
 #define MICROPY_HW_MCU_NAME "samd21e18"
 
+#define MICROPY_HW_LED_STATUS   (&pin_PA14)
+
 #define MICROPY_PORT_A        (0)
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 
+#define SPI_FLASH_MOSI_PIN          &pin_PA08
+#define SPI_FLASH_MISO_PIN          &pin_PA11
+#define SPI_FLASH_SCK_PIN           &pin_PA09
+#define SPI_FLASH_CS_PIN            &pin_PA10
+
 // No microcontroller.nvm
 #define CIRCUITPY_INTERNAL_NVM_SIZE 0
 
-#define DEFAULT_I2C_BUS_SCL (&pin_PA08)
-#define DEFAULT_I2C_BUS_SDA (&pin_PA09)
-
 #define DEFAULT_SPI_BUS_SCK (&pin_PA17)
 #define DEFAULT_SPI_BUS_MOSI (&pin_PA16)
 #define DEFAULT_SPI_BUS_MISO (&pin_PA19)
 
-#define DEFAULT_UART_BUS_RX (&pin_PA01)
-#define DEFAULT_UART_BUS_TX (&pin_PA00)
-
 #define IGNORE_PIN_PA03     1
 #define IGNORE_PIN_PA20     1
 #define IGNORE_PIN_PA21     1

ports/atmel-samd/boards/nfc_copy/mpconfigboard.h renamed to ports/atmel-samd/boards/nfc_copy_cat/mpconfigboard.h

@@ -6,6 +6,9 @@ USB_MANUFACTURER = "Electronic Cats"
 CHIP_VARIANT = SAMD21E18A
 CHIP_FAMILY = samd21
 
-INTERNAL_FLASH_FILESYSTEM = 1
+SPI_FLASH_FILESYSTEM = 1
+EXTERNAL_FLASH_DEVICE_COUNT = 1
+EXTERNAL_FLASH_DEVICES = "GD25Q16C"
 LONGINT_IMPL = NONE
+
 CIRCUITPY_SMALL_BUILD = 1

ports/atmel-samd/boards/nfc_copy/mpconfigboard.mk renamed to ports/atmel-samd/boards/nfc_copy_cat/mpconfigboard.mk

@@ -4,8 +4,8 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
     { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA02) }, // IRQ
     { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PA06) }, // IN_A
     { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PA07) }, // IN_B
-    { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA10) }, // LED
-    { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA11) }, // LED
+    { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA05) }, // LED
+    { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA04) }, // LED
     { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_PA14) }, // LED
     { MP_ROM_QSTR(MP_QSTR_D27), MP_ROM_PTR(&pin_PA27) }, // Switch
     { MP_ROM_QSTR(MP_QSTR_D28), MP_ROM_PTR(&pin_PA28) }, // Switch
@@ -15,7 +15,6 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
     { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA16) },
     { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PA19) },
     { MP_ROM_QSTR(MP_QSTR_D18), MP_ROM_PTR(&pin_PA18) }, // CS
-    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
     { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
 };
 MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);