Skip to content

Commit 5084de1

Browse files
tannewttannewt
authored
Merge pull request #6708 from strid3r21/main
Added Smart Bee Design Boards
2 parents c4db71d + b3b27a1 commit 5084de1

File tree

10 files changed

+411
-0
lines changed

10 files changed

+411
-0
lines changed

‎ports/espressif/boards/smartbeedesigns_bee_motion_s3/board.c

Lines changed: 48 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,48 @@
1+
/*
2+
* This file is part of the MicroPython project, http://micropython.org/
3+
*
4+
* The MIT License (MIT)
5+
*
6+
* Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
7+
*
8+
* Permission is hereby granted, free of charge, to any person obtaining a copy
9+
* of this software and associated documentation files (the "Software"), to deal
10+
* in the Software without restriction, including without limitation the rights
11+
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12+
* copies of the Software, and to permit persons to whom the Software is
13+
* furnished to do so, subject to the following conditions:
14+
*
15+
* The above copyright notice and this permission notice shall be included in
16+
* all copies or substantial portions of the Software.
17+
*
18+
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19+
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20+
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
21+
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22+
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23+
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24+
* THE SOFTWARE.
25+
*/
26+
27+
#include "supervisor/board.h"
28+
#include "mpconfigboard.h"
29+
#include "shared-bindings/microcontroller/Pin.h"
30+
31+
void board_init(void) {
32+
// Debug UART
33+
#ifdef DEBUG
34+
common_hal_never_reset_pin(&pin_GPIO43);
35+
common_hal_never_reset_pin(&pin_GPIO44);
36+
#endif /* DEBUG */
37+
}
38+
39+
bool board_requests_safe_mode(void) {
40+
return false;
41+
}
42+
43+
void reset_board(void) {
44+
45+
}
46+
47+
void board_deinit(void) {
48+
}

‎ports/espressif/boards/smartbeedesigns_bee_motion_s3/mpconfigboard.h

Lines changed: 41 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,41 @@
1+
/*
2+
* This file is part of the MicroPython project, http://micropython.org/
3+
*
4+
* The MIT License (MIT)
5+
*
6+
* Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
7+
*
8+
* Permission is hereby granted, free of charge, to any person obtaining a copy
9+
* of this software and associated documentation files (the "Software"), to deal
10+
* in the Software without restriction, including without limitation the rights
11+
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12+
* copies of the Software, and to permit persons to whom the Software is
13+
* furnished to do so, subject to the following conditions:
14+
*
15+
* The above copyright notice and this permission notice shall be included in
16+
* all copies or substantial portions of the Software.
17+
*
18+
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19+
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20+
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
21+
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22+
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23+
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24+
* THE SOFTWARE.
25+
*/
26+
27+
// Micropython setup
28+
29+
#define MICROPY_HW_BOARD_NAME "Bee-Motion-S3"
30+
#define MICROPY_HW_MCU_NAME "ESP32S3"
31+
32+
#define MICROPY_HW_NEOPIXEL (&pin_GPIO48)
33+
#define DEFAULT_UART_BUS_RX (&pin_GPIO44)
34+
#define DEFAULT_UART_BUS_TX (&pin_GPIO43)
35+
36+
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO36)
37+
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO37)
38+
39+
#define DEFAULT_SPI_BUS_SCK (&pin_GPIO17)
40+
#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO15)
41+
#define DEFAULT_SPI_BUS_MISO (&pin_GPIO16)

‎ports/espressif/boards/smartbeedesigns_bee_motion_s3/mpconfigboard.mk

Lines changed: 20 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,20 @@
1+
USB_VID = 0x303A
2+
USB_PID = 0x8114
3+
USB_PRODUCT = "Bee-Motion-S3"
4+
USB_MANUFACTURER = "Smart Bee Designs"
5+
6+
IDF_TARGET = esp32s3
7+
8+
INTERNAL_FLASH_FILESYSTEM = 1
9+
LONGINT_IMPL = MPZ
10+
11+
# The default queue depth of 16 overflows on release builds,
12+
# so increase it to 32.
13+
CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32
14+
15+
CIRCUITPY_ESP_FLASH_MODE = dio
16+
CIRCUITPY_ESP_FLASH_FREQ = 80m
17+
CIRCUITPY_ESP_FLASH_SIZE = 8MB
18+
19+
20+
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel

‎ports/espressif/boards/smartbeedesigns_bee_motion_s3/pins.c

Lines changed: 102 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,102 @@
1+
#include "shared-bindings/board/__init__.h"
2+
3+
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
4+
CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
5+
6+
7+
{ MP_ROM_QSTR(MP_QSTR_IO5), MP_ROM_PTR(&pin_GPIO5) },
8+
{ MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_GPIO5) },
9+
{ MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO5) },
10+
11+
{ MP_ROM_QSTR(MP_QSTR_IO6), MP_ROM_PTR(&pin_GPIO6) },
12+
{ MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_GPIO6) },
13+
{ MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO6) },
14+
15+
{ MP_ROM_QSTR(MP_QSTR_IO7), MP_ROM_PTR(&pin_GPIO7) },
16+
{ MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_GPIO7) },
17+
{ MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO7) },
18+
19+
{ MP_ROM_QSTR(MP_QSTR_IO8), MP_ROM_PTR(&pin_GPIO8) },
20+
{ MP_ROM_QSTR(MP_QSTR_A8), MP_ROM_PTR(&pin_GPIO8) },
21+
{ MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_GPIO8) },
22+
23+
{ MP_ROM_QSTR(MP_QSTR_IO9), MP_ROM_PTR(&pin_GPIO9) },
24+
{ MP_ROM_QSTR(MP_QSTR_A9), MP_ROM_PTR(&pin_GPIO9) },
25+
{ MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_GPIO9) },
26+
27+
{ MP_ROM_QSTR(MP_QSTR_IO10), MP_ROM_PTR(&pin_GPIO10) },
28+
{ MP_ROM_QSTR(MP_QSTR_A10), MP_ROM_PTR(&pin_GPIO10) },
29+
{ MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO10) },
30+
31+
{ MP_ROM_QSTR(MP_QSTR_IO11), MP_ROM_PTR(&pin_GPIO11) },
32+
{ MP_ROM_QSTR(MP_QSTR_A11), MP_ROM_PTR(&pin_GPIO11) },
33+
{ MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO11) },
34+
35+
{ MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) },
36+
{ MP_ROM_QSTR(MP_QSTR_A12), MP_ROM_PTR(&pin_GPIO12) },
37+
{ MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO12) },
38+
39+
{ MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) },
40+
{ MP_ROM_QSTR(MP_QSTR_A12), MP_ROM_PTR(&pin_GPIO12) },
41+
{ MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO12) },
42+
43+
{ MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) },
44+
{ MP_ROM_QSTR(MP_QSTR_A13), MP_ROM_PTR(&pin_GPIO13) },
45+
{ MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO13) },
46+
47+
{ MP_ROM_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) },
48+
{ MP_ROM_QSTR(MP_QSTR_A14), MP_ROM_PTR(&pin_GPIO14) },
49+
{ MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_GPIO14) },
50+
51+
{ MP_ROM_QSTR(MP_QSTR_IO15), MP_ROM_PTR(&pin_GPIO15) },
52+
{ MP_ROM_QSTR(MP_QSTR_A15), MP_ROM_PTR(&pin_GPIO15) },
53+
{ MP_ROM_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_GPIO15) },
54+
55+
{ MP_ROM_QSTR(MP_QSTR_IO16), MP_ROM_PTR(&pin_GPIO16) },
56+
{ MP_ROM_QSTR(MP_QSTR_D16), MP_ROM_PTR(&pin_GPIO16) },
57+
58+
{ MP_ROM_QSTR(MP_QSTR_IO17), MP_ROM_PTR(&pin_GPIO17) },
59+
{ MP_ROM_QSTR(MP_QSTR_D17), MP_ROM_PTR(&pin_GPIO17) },
60+
61+
62+
{ MP_ROM_QSTR(MP_QSTR_IO35), MP_ROM_PTR(&pin_GPIO35) },
63+
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO35) },
64+
{ MP_ROM_QSTR(MP_QSTR_D35), MP_ROM_PTR(&pin_GPIO35) },
65+
66+
{ MP_ROM_QSTR(MP_QSTR_IO36), MP_ROM_PTR(&pin_GPIO36) },
67+
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO36) },
68+
{ MP_ROM_QSTR(MP_QSTR_D36), MP_ROM_PTR(&pin_GPIO36) },
69+
70+
{ MP_ROM_QSTR(MP_QSTR_IO37), MP_ROM_PTR(&pin_GPIO37) },
71+
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO37) },
72+
{ MP_ROM_QSTR(MP_QSTR_D37), MP_ROM_PTR(&pin_GPIO37) },
73+
74+
{ MP_ROM_QSTR(MP_QSTR_IO48), MP_ROM_PTR(&pin_GPIO48) },
75+
{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO40) },
76+
{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_GPIO34) },
77+
78+
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) },
79+
{ MP_ROM_QSTR(MP_QSTR_D43), MP_ROM_PTR(&pin_GPIO43) },
80+
{ MP_ROM_QSTR(MP_QSTR_IO43), MP_ROM_PTR(&pin_GPIO43) },
81+
82+
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) },
83+
{ MP_ROM_QSTR(MP_QSTR_IO44), MP_ROM_PTR(&pin_GPIO44)},
84+
{ MP_ROM_QSTR(MP_QSTR_D44), MP_ROM_PTR(&pin_GPIO44) },
85+
86+
{ MP_ROM_QSTR(MP_QSTR_BOOT_BTN), MP_ROM_PTR(&pin_GPIO0) },
87+
{ MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_GPIO1) },
88+
{ MP_ROM_QSTR(MP_QSTR_VBAT), MP_ROM_PTR(&pin_GPIO1) },
89+
{ MP_ROM_QSTR(MP_QSTR_VBAT_SENSE), MP_ROM_PTR(&pin_GPIO1) },
90+
{ MP_ROM_QSTR(MP_QSTR_VOLTAGE_MONITOR), MP_ROM_PTR(&pin_GPIO1) },
91+
{ MP_ROM_QSTR(MP_QSTR_VBUS_SENSE), MP_ROM_PTR(&pin_GPIO2) },
92+
{ MP_ROM_QSTR(MP_QSTR_LIGHT), MP_ROM_PTR(&pin_GPIO3) },
93+
{ MP_ROM_QSTR(MP_QSTR_LIGHT_SENSOR), MP_ROM_PTR(&pin_GPIO3) },
94+
{ MP_ROM_QSTR(MP_QSTR_PIR), MP_ROM_PTR(&pin_GPIO4) },
95+
{ MP_ROM_QSTR(MP_QSTR_PIR_SENSOR), MP_ROM_PTR(&pin_GPIO4) },
96+
{ MP_ROM_QSTR(MP_QSTR_), MP_ROM_PTR(&pin_GPIO34) },
97+
98+
99+
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
100+
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
101+
};
102+
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

‎ports/espressif/boards/smartbeedesigns_bee_motion_s3/sdkconfig

Lines changed: 6 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,6 @@
1+
# CONFIG_ESP32S3_SPIRAM_SUPPORT is not set
2+
#
3+
# LWIP
4+
#
5+
CONFIG_LWIP_LOCAL_HOSTNAME="smartbeedesigns_bee_motion_s3"
6+
# end of LWIP

‎ports/espressif/boards/smartbeedesigns_bee_s3/board.c

Lines changed: 48 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,48 @@
1+
/*
2+
* This file is part of the MicroPython project, http://micropython.org/
3+
*
4+
* The MIT License (MIT)
5+
*
6+
* Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
7+
*
8+
* Permission is hereby granted, free of charge, to any person obtaining a copy
9+
* of this software and associated documentation files (the "Software"), to deal
10+
* in the Software without restriction, including without limitation the rights
11+
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12+
* copies of the Software, and to permit persons to whom the Software is
13+
* furnished to do so, subject to the following conditions:
14+
*
15+
* The above copyright notice and this permission notice shall be included in
16+
* all copies or substantial portions of the Software.
17+
*
18+
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19+
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20+
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
21+
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22+
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23+
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24+
* THE SOFTWARE.
25+
*/
26+
27+
#include "supervisor/board.h"
28+
#include "mpconfigboard.h"
29+
#include "shared-bindings/microcontroller/Pin.h"
30+
31+
void board_init(void) {
32+
// Debug UART
33+
#ifdef DEBUG
34+
common_hal_never_reset_pin(&pin_GPIO43);
35+
common_hal_never_reset_pin(&pin_GPIO44);
36+
#endif /* DEBUG */
37+
}
38+
39+
bool board_requests_safe_mode(void) {
40+
return false;
41+
}
42+
43+
void reset_board(void) {
44+
45+
}
46+
47+
void board_deinit(void) {
48+
}

‎ports/espressif/boards/smartbeedesigns_bee_s3/mpconfigboard.h

Lines changed: 41 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,41 @@
1+
/*
2+
* This file is part of the MicroPython project, http://micropython.org/
3+
*
4+
* The MIT License (MIT)
5+
*
6+
* Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
7+
*
8+
* Permission is hereby granted, free of charge, to any person obtaining a copy
9+
* of this software and associated documentation files (the "Software"), to deal
10+
* in the Software without restriction, including without limitation the rights
11+
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12+
* copies of the Software, and to permit persons to whom the Software is
13+
* furnished to do so, subject to the following conditions:
14+
*
15+
* The above copyright notice and this permission notice shall be included in
16+
* all copies or substantial portions of the Software.
17+
*
18+
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19+
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20+
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
21+
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22+
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23+
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24+
* THE SOFTWARE.
25+
*/
26+
27+
// Micropython setup
28+
29+
#define MICROPY_HW_BOARD_NAME "Bee-S3"
30+
#define MICROPY_HW_MCU_NAME "ESP32S3"
31+
32+
#define MICROPY_HW_NEOPIXEL (&pin_GPIO48)
33+
#define DEFAULT_UART_BUS_RX (&pin_GPIO44)
34+
#define DEFAULT_UART_BUS_TX (&pin_GPIO43)
35+
36+
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO36)
37+
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO37)
38+
39+
#define DEFAULT_SPI_BUS_SCK (&pin_GPIO39)
40+
#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35)
41+
#define DEFAULT_SPI_BUS_MISO (&pin_GPIO38)

‎ports/espressif/boards/smartbeedesigns_bee_s3/mpconfigboard.mk

Lines changed: 20 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,20 @@
1+
USB_VID = 0x303A
2+
USB_PID = 0x8111
3+
USB_PRODUCT = "Bee-S3"
4+
USB_MANUFACTURER = "Smart Bee Designs"
5+
6+
IDF_TARGET = esp32s3
7+
8+
INTERNAL_FLASH_FILESYSTEM = 1
9+
LONGINT_IMPL = MPZ
10+
11+
# The default queue depth of 16 overflows on release builds,
12+
# so increase it to 32.
13+
CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32
14+
15+
CIRCUITPY_ESP_FLASH_MODE = dio
16+
CIRCUITPY_ESP_FLASH_FREQ = 80m
17+
CIRCUITPY_ESP_FLASH_SIZE = 8MB
18+
19+
20+
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel

0 commit comments

Comments
 (0)