Skip to content

Commit 5e6527f

Browse files
tannewttannewt
authored
Merge pull request #9391 from aguaviva/supporting_ttgo_t8_v1_7
adding support for TTGO T8 v1.7
2 parents 06d6535 + 3930639 commit 5e6527f

File tree

5 files changed

+154
-0
lines changed

5 files changed

+154
-0
lines changed

‎ports/espressif/boards/ttgo_t8_v1_7/board.c

Lines changed: 29 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,29 @@
1+
/*
2+
* This file is part of the MicroPython project, http://micropython.org/
3+
*
4+
* The MIT License (MIT)
5+
*
6+
* Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
7+
*
8+
* Permission is hereby granted, free of charge, to any person obtaining a copy
9+
* of this software and associated documentation files (the "Software"), to deal
10+
* in the Software without restriction, including without limitation the rights
11+
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12+
* copies of the Software, and to permit persons to whom the Software is
13+
* furnished to do so, subject to the following conditions:
14+
*
15+
* The above copyright notice and this permission notice shall be included in
16+
* all copies or substantial portions of the Software.
17+
*
18+
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19+
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20+
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
21+
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22+
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23+
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24+
* THE SOFTWARE.
25+
*/
26+
27+
#include "supervisor/board.h"
28+
29+
// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.

‎ports/espressif/boards/ttgo_t8_v1_7/mpconfigboard.h

Lines changed: 49 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,49 @@
1+
/*
2+
* This file is part of the MicroPython project, http://micropython.org/
3+
*
4+
* The MIT License (MIT)
5+
*
6+
* Copyright (c) 2022 Dan Halbert for Adafruit Industries
7+
*
8+
* Permission is hereby granted, free of charge, to any person obtaining a copy
9+
* of this software and associated documentation files (the "Software"), to deal
10+
* in the Software without restriction, including without limitation the rights
11+
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12+
* copies of the Software, and to permit persons to whom the Software is
13+
* furnished to do so, subject to the following conditions:
14+
*
15+
* The above copyright notice and this permission notice shall be included in
16+
* all copies or substantial portions of the Software.
17+
*
18+
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19+
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20+
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
21+
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22+
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23+
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24+
* THE SOFTWARE.
25+
*/
26+
27+
// Micropython setup
28+
29+
#define MICROPY_HW_BOARD_NAME "Espressif ESP32 TTGO T8 v1.7"
30+
#define MICROPY_HW_MCU_NAME "ESP32"
31+
32+
#define MICROPY_HW_LED_STATUS (&pin_GPIO21)
33+
34+
#define CIRCUITPY_BOARD_I2C (1)
35+
#define CIRCUITPY_BOARD_I2C_PIN {{.scl = &pin_GPIO22, .sda = &pin_GPIO21}}
36+
#define CIRCUITPY_I2C_ALLOW_INTERNAL_PULL_UP 1
37+
38+
#define CIRCUITPY_BOARD_SPI (1)
39+
#define CIRCUITPY_BOARD_SPI_PIN {{.clock = &pin_GPIO18, .mosi = &pin_GPIO23, .miso = &pin_GPIO19}}
40+
41+
#define CIRCUITPY_BOARD_UART (1)
42+
#define CIRCUITPY_BOARD_UART_PIN {{.tx = &pin_GPIO17, .rx = &pin_GPIO16}}
43+
44+
45+
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
46+
47+
// UART pins attached to the USB-serial converter chip
48+
#define CIRCUITPY_CONSOLE_UART_TX (&pin_GPIO1)
49+
#define CIRCUITPY_CONSOLE_UART_RX (&pin_GPIO3)

‎ports/espressif/boards/ttgo_t8_v1_7/mpconfigboard.mk

Lines changed: 10 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,10 @@
1+
CIRCUITPY_CREATOR_ID = 0x000C303A
2+
CIRCUITPY_CREATION_ID = 0x00320005
3+
4+
IDF_TARGET = esp32
5+
6+
CIRCUITPY_ESP_FLASH_MODE = qio
7+
CIRCUITPY_ESP_FLASH_FREQ = 80m
8+
CIRCUITPY_ESP_FLASH_SIZE = 4MB
9+
10+
CIRCUITPY_ESPCAMERA = 0

‎ports/espressif/boards/ttgo_t8_v1_7/pins.c

Lines changed: 66 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,66 @@
1+
#include "shared-bindings/board/__init__.h"
2+
3+
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
4+
CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
5+
6+
// External pins are in silkscreen order, from top to bottom, left side, then right side
7+
// Left Side
8+
9+
// Input-only pins, VP/VN on silkscreen
10+
{ MP_ROM_QSTR(MP_QSTR_I36), MP_ROM_PTR(&pin_GPIO36) },
11+
{ MP_ROM_QSTR(MP_QSTR_VP), MP_ROM_PTR(&pin_GPIO36) },
12+
{ MP_ROM_QSTR(MP_QSTR_I39), MP_ROM_PTR(&pin_GPIO39) },
13+
{ MP_ROM_QSTR(MP_QSTR_VN), MP_ROM_PTR(&pin_GPIO39) },
14+
{ MP_ROM_QSTR(MP_QSTR_I34), MP_ROM_PTR(&pin_GPIO34) },
15+
{ MP_ROM_QSTR(MP_QSTR_I35), MP_ROM_PTR(&pin_GPIO35) },
16+
17+
18+
{ MP_ROM_QSTR(MP_QSTR_IO32), MP_ROM_PTR(&pin_GPIO32) },
19+
{ MP_ROM_QSTR(MP_QSTR_IO33), MP_ROM_PTR(&pin_GPIO33) },
20+
21+
// Normal pins
22+
{ MP_ROM_QSTR(MP_QSTR_IO25), MP_ROM_PTR(&pin_GPIO25) },
23+
{ MP_ROM_QSTR(MP_QSTR_IO26), MP_ROM_PTR(&pin_GPIO26) },
24+
{ MP_ROM_QSTR(MP_QSTR_IO27), MP_ROM_PTR(&pin_GPIO27) },
25+
{ MP_ROM_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) },
26+
{ MP_ROM_QSTR(MP_QSTR_SD_SCK), MP_ROM_PTR(&pin_GPIO14) },
27+
{ MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) },
28+
{ MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) },
29+
{ MP_ROM_QSTR(MP_QSTR_SD_CS), MP_ROM_PTR(&pin_GPIO13) },
30+
{ MP_ROM_QSTR(MP_QSTR_IO15), MP_ROM_PTR(&pin_GPIO15) },
31+
{ MP_ROM_QSTR(MP_QSTR_SD_MOSI), MP_ROM_PTR(&pin_GPIO15) },
32+
33+
// Right Side
34+
35+
{ MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO21) },
36+
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO21) },
37+
{ MP_ROM_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) },
38+
39+
{ MP_ROM_QSTR(MP_QSTR_IO1), MP_ROM_PTR(&pin_GPIO1) },
40+
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO1) },
41+
{ MP_ROM_QSTR(MP_QSTR_IO3), MP_ROM_PTR(&pin_GPIO3) },
42+
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO3) },
43+
44+
{ MP_ROM_QSTR(MP_QSTR_IO22), MP_ROM_PTR(&pin_GPIO22) },
45+
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO22) },
46+
47+
// Normal pins
48+
{ MP_ROM_QSTR(MP_QSTR_IO19), MP_ROM_PTR(&pin_GPIO19) },
49+
{ MP_ROM_QSTR(MP_QSTR_IO23), MP_ROM_PTR(&pin_GPIO23) },
50+
{ MP_ROM_QSTR(MP_QSTR_IO18), MP_ROM_PTR(&pin_GPIO18) },
51+
{ MP_ROM_QSTR(MP_QSTR_IO5), MP_ROM_PTR(&pin_GPIO5) },
52+
{ MP_ROM_QSTR(MP_QSTR_SD_MISO), MP_ROM_PTR(&pin_GPIO2) },
53+
{ MP_ROM_QSTR(MP_QSTR_IO2), MP_ROM_PTR(&pin_GPIO2) },
54+
55+
{ MP_ROM_QSTR(MP_QSTR_IO0), MP_ROM_PTR(&pin_GPIO0) },
56+
{ MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO0) },
57+
{ MP_ROM_QSTR(MP_QSTR_BOOT0), MP_ROM_PTR(&pin_GPIO0) },
58+
59+
{ MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) },
60+
61+
{MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj)},
62+
{MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj)},
63+
{MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj)}
64+
65+
};
66+
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

‎ports/espressif/boards/ttgo_t8_v1_7/sdkconfig

Whitespace-only changes.

0 commit comments

Comments
 (0)