remove duplicate press boot button, it's already the default

Neradoc · Neradoc · commit 934d2a7004a9 · 2022-10-30T01:52:17.000+02:00
diff --git a/ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h b/ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
@@ -5,9 +5,6 @@
 
 #define CALIBRATE_CRYSTALLESS 1
 
-// Explanation of how a user got into safe mode.
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing both buttons at start up.\n")
-
 #define DEFAULT_I2C_BUS_SCL (&pin_PA08)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA09)
 
diff --git a/ports/espressif/boards/adafruit_qtpy_esp32_pico/mpconfigboard.h b/ports/espressif/boards/adafruit_qtpy_esp32_pico/mpconfigboard.h
@@ -41,9 +41,6 @@
 
 #define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO0)
 
-// Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing BOOT button at start up.\n")
-
 // UART pins attached to the USB-serial converter chip
 #define CIRCUITPY_CONSOLE_UART_TX (&pin_GPIO1)
 #define CIRCUITPY_CONSOLE_UART_RX (&pin_GPIO3)
diff --git a/ports/espressif/boards/adafruit_qtpy_esp32c3/mpconfigboard.h b/ports/espressif/boards/adafruit_qtpy_esp32c3/mpconfigboard.h
@@ -44,7 +44,4 @@
 // For entering safe mode
 #define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO9)
 
-// Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
 #define CIRCUITPY_ESP_USB_SERIAL_JTAG (1)
diff --git a/ports/espressif/boards/beetle-esp32-c3/mpconfigboard.h b/ports/espressif/boards/beetle-esp32-c3/mpconfigboard.h
@@ -41,7 +41,4 @@
 #define CIRCUITPY_BOARD_UART        (1)
 #define CIRCUITPY_BOARD_UART_PIN    {{.tx = &pin_GPIO21, .rx = &pin_GPIO20}}
 
-// Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
 #define CIRCUITPY_ESP_USB_SERIAL_JTAG (1)
diff --git a/ports/espressif/boards/espressif_esp32s2_devkitc_1_n8r2/mpconfigboard.h b/ports/espressif/boards/espressif_esp32s2_devkitc_1_n8r2/mpconfigboard.h
@@ -35,5 +35,3 @@
 
 #define DEFAULT_UART_BUS_RX         (&pin_GPIO44)
 #define DEFAULT_UART_BUS_TX         (&pin_GPIO43)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
diff --git a/ports/espressif/boards/lolin_c3_mini/mpconfigboard.h b/ports/espressif/boards/lolin_c3_mini/mpconfigboard.h
@@ -45,7 +45,4 @@
 #define CIRCUITPY_BOARD_UART        (1)
 #define CIRCUITPY_BOARD_UART_PIN    {{.tx = &pin_GPIO21, .rx = &pin_GPIO20}}
 
-// Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
 #define CIRCUITPY_ESP_USB_SERIAL_JTAG (1)
diff --git a/ports/espressif/boards/microdev_micro_c3/mpconfigboard.h b/ports/espressif/boards/microdev_micro_c3/mpconfigboard.h
@@ -50,6 +50,3 @@
 
 // For entering safe mode
 #define CIRCUITPY_BOOT_BUTTON           (&pin_GPIO9)
-
-// Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
diff --git a/ports/espressif/boards/unexpectedmaker_tinypico/mpconfigboard.h b/ports/espressif/boards/unexpectedmaker_tinypico/mpconfigboard.h
@@ -33,11 +33,6 @@
 #define CIRCUITPY_BOARD_SPI         (1)
 #define CIRCUITPY_BOARD_SPI_PIN     {{.clock = &pin_GPIO18, .mosi = &pin_GPIO23, .miso = &pin_GPIO19}}
 
-// #define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO0)
-
-// Explanation of how a user got into safe mode
-// #define BOARD_USER_SAFE_MODE_ACTION translate("pressing BOOT button at start up.\n")
-
 // UART pins attached to the USB-serial converter chip
 #define CIRCUITPY_CONSOLE_UART_TX (&pin_GPIO1)
 #define CIRCUITPY_CONSOLE_UART_RX (&pin_GPIO3)
diff --git a/ports/espressif/boards/unexpectedmaker_tinypico_nano/mpconfigboard.h b/ports/espressif/boards/unexpectedmaker_tinypico_nano/mpconfigboard.h
@@ -33,11 +33,6 @@
 #define CIRCUITPY_BOARD_SPI         (1)
 #define CIRCUITPY_BOARD_SPI_PIN     {{.clock = &pin_GPIO18, .mosi = &pin_GPIO23, .miso = &pin_GPIO19}}
 
-// #define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO0)
-
-// Explanation of how a user got into safe mode
-// #define BOARD_USER_SAFE_MODE_ACTION translate("pressing BOOT button at start up.\n")
-
 // UART pins attached to the USB-serial converter chip
 #define CIRCUITPY_CONSOLE_UART_TX (&pin_GPIO1)
 #define CIRCUITPY_CONSOLE_UART_RX (&pin_GPIO3)
